Commercial graphite anode has advantages such as low potential platform, high electronic conductivity, and abundant reserves. However, its theoretical capacity is only 372 mA h g−1. High-energy lithium-ion batteries have been a research hotspot. The Si anode has an extremely high specific capacity, but its application is hindered by defects such as large volume changes, poor electronic conductivity, and a small lithium-ion diffusion coefficient. Here, the Si/thermally reduced graphite oxide@carbon (Si/RGtO@C) composite was fabricated by electrostatic self-assembly followed by thermal treatment. The RGtO synergistic carbon coating layer can effectively compensate for the low electronic conductivity and buffer the volume expansion effect of the Si nanoparticles during charge/discharge cycles. The Si/RGtO@C anode demonstrated a significantly increased capacity compared to the RGtO. After 300 cycles, Si/RGtO@C kept a discharged capacity of 367.6 mA h g−1 at a high current density of 1.0 A g−1. The Si/RGtO@C anode shows an application potential for commercial high-energy lithium-ion batteries.
Thermally oxidized MWCNTs (OMWCNTs) are fabricated by a thermal treatment of MWCNTs at 500 °C for 3 h in an oxygen-containing atmosphere. The oxygen content of OMWCNTs increases from 1.9 wt% for MWCNTs to 8.3 wt%. And the BET specific surface area of OMWCNTs enhances from 254.2 m2 g−1 for MWCNTs to 496.1 m2 g−1. The Fe2O3/OMWCNTs nanocomposite is prepared by a hydrothermal method. Electrochemical measurements show that Fe2O3/OMWCNTs still keeps a highly reversible specific capacity of 653.6 mA h g−1 after 200 cycles at 0.5 A g−1, which shows an obviously higher capacity than the sum of that of single Fe2O3 and OMWCNTs. The OMWCNTs not only buffer the volume changes of Fe2O3 nanoparticles but also provide high-speed electronic transmission channels in the charge–discharge process. The thermal oxidation method of OMWCNTs avoids using strong corrosive acids such as nitric acid and sulfuric acid, which has the advantages of safety, environmental protection, macroscopic preparation, etc.