Bo Liu

Mr. Bo Liu


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2024 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
BLBo Liu
Bo Liu
SSSøren Bredmose Simonsen
Søren Bredmose Simonsen
JHJohan Hjelm
Johan Hjelm
Improving reactor performance of redox flow batteries is critical to reduce capital cost, and one of the main contributions to the internal resistance is generated by the electrodes, which also impact the pressure drop of the stack. Porous electrodes with optimized microstructure and physiochemical properties play a key role in enhancing electrochemical and fluid dynamic performance. Electrode compression significantly impacts morphology and battery behavior, but the relationship between microstructure and performance remains unclear. In the present study, three representative, commercially available, carbon-fiber electrodes (i.e., paper, felt, and cloth) with distinct microstructures were investigated, and a comprehensive study was conducted to compare morphology, hydraulic permeability, mechanical behavior, electrochemical performance in a lab-scale vanadium redox flow battery at compression ratios of 0%–50%. The 3D electrode morphology was characterized through X-ray computed tomography and the extracted microstructure parameters (e.g., surface area and tortuosity) were compared with corresponding electrochemically determined parameters. The optimal trade-off between fluid dynamics and electrochemical performance occurred at the compression ratios of 30%, 20%, and 20% for the felt, paper, and cloth, respectively. Owing to the bi-modal porosity of the woven microstructure, the cloth showed a better trade-off between the electrochemical performance and pressure drop than the other electrodes.

14 October 2025 in Energy & Environmental Science
Verified
Journal Article
Open access
PDF file
RHRens J. Horst
Rens J. Horst
RLRalph van der Linde
Ralph van der Linde
RJRémy R. Jacquemond
Rémy R. Jacquemond
BLBo Liu
Bo Liu
AFAntoni Forner-Cuenca
Antoni Forner-Cuenca
Gas diffusion media are essential components in polymer electrolyte membrane fuel cells and a broad range of electrochemical technologies, enabling efficient mass transport of gas and liquid, electronic and thermal conductivity, and structural integrity under compression. Conventional diffusion media, typically made from carbon fiber substrates with microporous layers, have been extensively post-treated to enhance performance; however, these approaches offer limited control over three-dimensional microstructure, particularly for advanced architectures with bimodal or gradient porosity – which can facilitate multiphase gas and liquid mass transport – and often rely on complex, multi-step processes. These limitations underscore the need for scalable, cost-effective fabrication methods capable of producing much broader geometrical features. Here, we introduce a scalable, bottom-up fabrication method based on non-solvent induced phase separation (NIPS) to produce carbon-based diffusion media with finely tunable microstructures. By systematically varying processing parameters, we generate thin, mechanically robust diffusion media with tailored in-plane and through-plane porosity, including isoporous and bimodal structures. Using microscopy, porosimetry, and electrochemical diagnostics, we correlate microstructural features with single-cell fuel cell performance, revealing their impact on water management and gas transport. We further demonstrate post-treatment strategies to enhance mass transport properties and benchmark the cost and scalability of NIPS fabrication against conventional carbon fiber-based diffusion media via techno-economic analysis. Our findings highlight the potential of NIPS as a versatile and industrially relevant pathway for next-generation diffusion media, offering new design freedoms to optimize fuel cell performance and reduce system-level costs.

Verified
Journal Article
Open access
PDF file
BLBo Liu
Bo Liu
José Pineda de GyvezJosé Pineda de Gyvez
José Pineda de Gyvez
MAMaryam Ashouei
Maryam Ashouei
Scaling the voltage to the sub-threshold region is a convincing technique to achieve low power in digital circuits. The problem is that process variability severely impacts the performance of circuits operating in the sub-threshold domain. In this paper, we evaluate the sub-threshold sizing methodology of [1,2] on 40 nm and 90 nm standard cell libraries. The concept of the proposed sizing methodology consists of balancing the mean of the sub-threshold current of the equivalent N and P networks. In this paper, the equivalent N and P networks are derived based on the best and worst case transition times. The slack available in the best-case timing arc is reduced by using smaller transistors on that path, while the timing of the worst-case timing arc is improved by using bigger transistors. The optimization is done such that the overall area remains constant with regard to the area before optimization. Two sizing styles are applied, one is based on both transistor width and length tuning, and the other one is based on width tuning only. Compared to super-threshold libraries, at 0.3 V, the proposed libraries achieve 49% and 89% average cell timing improvement and 55% and 31% power delay product improvement at 40 nm and 90 nm respectively. From ITC (International Test Conference 99) benchmark circuit synthesis results, at 0.3 V the proposed library achieves up to 52% timing improvement and 53% power savings in the 40 nm technology node.

7 April 2026 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
BLBo Liu
Bo Liu
RJRémy Richard Jacquemond
Rémy Richard Jacquemond
AFAntoni Forner-Cuenca
Antoni Forner-Cuenca
Redox flow batteries (RFBs) are promising for large-scale energy storage, but their widespread deployment is limited by elevated capital costs. Advancing porous electrode to achieve high power density is an effective strategy for reducing the system-level costs. Conventional fibrous electrodes are not originally designed for RFBs, resulting in low surface area and suboptimal microstructure. Recently, non-solvent induced phase separation (NIPS) has emerged as a versatile method for fabricating non-fibrous electrodes with engineered architectures. Building on our previous work, we introduce a nanoparticle-assisted templating strategy to achieve multimodal pore networks. CaCO 3 nanoparticles are incorporated into the polymer solution and subsequently removed to template mesopores within the scaffold. By varying the CaCO 3 loading from 2.5 wt.% to 15 wt.%, we systematically evaluate the effects on solution rheology, microstructure, pressure drop, and electrochemical performance. The resulting electrodes exhibit trimodal pore networks, which ensures high permeability, enhanced electrochemical surface area, and efficient electrolyte transport. Electrochemical testing in vanadium RFBs shows a significant increase in peak power density, with optimal performance achieved at 5 wt.% loading (757 mW cm -2 ). These results highlight the benefits of a multimodal pore microstructure in RFB electrodes and open a pathway for electrode engineering applicable to other electrochemical technologies.

24 November 2025 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
AFAntoni Forner-Cuenca
Antoni Forner-Cuenca
RJRémy Richard Jacquemond
Rémy Richard Jacquemond
MHMaxime van der Heijden
Maxime van der Heijden
MBMojtaba Barzegari
Mojtaba Barzegari
IGInmaculada Gimenez-Garcia
Inmaculada Gimenez-Garcia
EBEmre Burak Boz
Emre Burak Boz
Porous electrodes are foundational components in electrochemical energy conversion and storage systems. In redox flow batteries (RFBs), electrode materials govern reaction kinetics and mass transport, ultimately defining system performance, durability, and cost. While conventional RFBs typically employ commercially available materials such as carbon felts and papers, emerging research has demonstrated that novel electrode architectures can outperform these fibrous structures. This progress underscores the importance of understanding how microstructure and surface composition influence electrochemical behavior. In this lecture, I will first review the fundamental roles of electrodes in RFBs and outline performance requirements across various flow battery chemistries, supported by illustrative examples from recent literature. I will then highlight three recent developments from our research group: (1) computational design of porous electrodes using high-performance topology optimization frameworks and genetic algorithms 1,2 , (2) scalable manufacturing of tailored electrode architectures 3–5 , and (3) surface and electrolyte engineering strategies to modulate reaction selectivity in hybrid flow battery systems 6,7 . Finally, I will present key electrode performance metrics, discuss characterization techniques to assess them, and conclude with practical guidelines for rational electrode design. References (1) Barzegari, M.; Forner-Cuenca, Chemical Engineering Journal 2025 , 512 , 161815. (2) Van Der Heijden, M.; Szendrei, G.; De Haas, V.; Forner-Cuenca, A., Digital Discovery 2024 , 3 (7), 1292–1307. (3) Integrating Flow Field Geometries within Porous Electrode Architectures for Enhanced Flow Battery, ChemRxiv . https://chemrxiv.org/engage/chemrxiv/article-details/67e7c119fa469535b9e81bbd. (4) Jacquemond, R. R.; Wan, C. T.-C.; Chiang, Y.-M.; Borneman, Z.; Brushett, F. R.; Nijmeijer, K.; Forner-Cuenca, A, Cell Reports Physical Science 2022 , 3 (7), 100943. (5) Wan, C. T.-C.; Jacquemond, R. R.; Chiang, Y.-M.; Nijmeijer, K.; Brushett, F. R.; Forner-Cuenca, Advanced Materials 2021 , 33 (16), 2006716 (6) Boz, E. B.; Bondre, A.; Bruijne, R. de; Forner-Cuenca, Advanced Materials 2025 , 2414596. (7) Gimenez-Garcia, I.; Forner-Cuenca, Electrochimica Acta 2024 , 498 , 144509.

22 December 2023 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
BLBo Liu
Bo Liu
RJRémy Jacquemond
Rémy Jacquemond
JHJohan Hjelm
Johan Hjelm
AFAntoni Forner-Cuenca
Antoni Forner-Cuenca
To facilitate increasing penetration of intermittent renewables in the energy mix, there is a growing need for energy storage technologies. Redox flow batteries (RFBs) have attracted significant attention in recent years due to their suitable characteristics for long-duration stationary energy storage applications. However, the wider adoption of RFB systems is still limited by the capital cost, to which the reactor stack is a large contributor[1]. Further cost reduction can be achieved by reducing kinetic, mass-transfer, and ohmic losses to improve the stack performance. Porous electrodes are key components within the battery stack, providing active sites for electrochemical reactions, and transport pathways for active species. Commercially available carbon-fiber electrode architectures include carbon paper, carbon felt, and carbon cloth. They have a highly porous structure, but their relatively low surface area and low hierarchical fiber orientation increase both electrochemical and pumping losses[2]. There is still a need to develop a low-cost porous electrode that meets the requirements of high active surface area and facile electrolyte transport to enhance battery performance and system efficiency. Non-solvent induced phase separation (NIPS) is a manufacturing route in the field of membrane technology, which is widely used to fabricate asymmetric membranes[3]. Recently this route has also been used to fabricate non-fibrous porous electrodes[4]. The microstructure of NIPS electrodes is largely influenced and controlled by the solvent/non-solvent exchange rate at the interface between a polymer solution and a coagulation bath. When the phase exchange process is slow, segregation is delayed. This type of segregation generally results in a sponge-like, relatively dense structure[5]. This sponge-like structure has the advantage of small pore size and high surface area, but also has poor hydraulic permeability and high mass-transfer losses. The trade-off between surface area and permeability needs to be further optimized. In the present study, inspired by the flow field designs widely used in RFBs to guide the electrolyte flow paths for low pressure drop, uniform electrolyte distribution, and high electrochemical performance[6], we propose a strategy to imprint micro-patterned flow fields directly into the electrode architecture during NIPS processing to improve mass transfer properties. NIPS polymer films were cast onto molds with specific micro-patterns, and the resulting micro-channels can be preserved in the electrodes after carbonization. To verify the effectiveness of the micro-patterned electrodes, here, we investigate two selected micro-patterned designs. The groove-patterned electrodes were combined with flow-through flow fields (FT-FFs) for in-plane mass transport optimization, and the pillar-patterned electrodes were combined with interdigitated flow fields (IDFFs) for through-plane flow optimizations[7]. Two geometric sizes of the micro-patterns were considered in each design. The pore sizes and distributions of the micro-patterned electrodes were determined by mercury intrusion porosimetry. The hydraulic permeability of the electrodes was evaluated by half-cell pressure drop measurements, and the electrochemical specific surface area was determined through electrochemical impedance spectroscopy under non-faradaic conditions. In addition, we performed electrochemical battery tests with symmetric iron RFB (0.5 M Fe2+/Fe3+, 2 M HCl) cells and vanadium full-cells (1.6 M V active species at 50% state-of-charge). It was found that due to the small pore size (e.g., ~1 μm) and narrow pore size distribution of the sponge-like NIPS structure, the main contribution to the total losses in electrodes without micro-patterns in electrochemical performance comes from mass-transfer. Electrodes with groove and pillar patterns can help reduce the pressure drop and improve mass transfer properties. Pillar-patterned electrodes with the combination of IDFF show high overall electrochemical performance with greatly reduced mass transport resistances. At an electrolyte velocity of 10 cm/s, the total resistances for kinetic and mass transfer are less than 0.1 Ω·cm2 in symmetric iron cell tests. Compared to the activated commercial electrode (e.g., 2-layer Freudenberg H23 carbon paper, thermally treated at 450 oC for 12 h), the total resistances for kinetic and mass transfer are reduced by ~60%, which shows great potential for adoption in next generation high-performance RFB systems. References J. Noack, L. Wietschel, N. Roznyatovskaya, K. Pinkwart, J. Tübke, Energies, 9, 627 (2016). A. Forner-Cuenca, F.Brushett, Current Opinion in Electrochemistry, 18, 113-122 (2019). H. Wang, J. Jung, J. Kim, S. Kim, E. Drioli, Y. Lee, Journal of Membrane Science, 574, 44-54 (2019). C. Wan, R. Jacquemond, Y. Chiang, K. Nijmeijer, F. Brushett, A. Forner-Cuenca, Advanced Materials, 33, 2006716 (2021). D. Wang, J. Lai, Current Opinion in Chemical Engineering, 2, 229-237 (2013). X. Ke, J. Prahl, J. Alexander, J. Wainright, T. Zawodzinski, R. Savinell, Chemical Society Reviews, 23, 8721-8743 (2018). V. Muñoz-Perales, P. García-Salaberri, A. Mularczyk, S. Ibáñez, M. Vera, A. Forner-Cuenca, ChemRxiv, (2023).