This article claims, an investigation on compact ultrathin triple band polarization independent metamaterial absorber for microwave frequency applications. The proposed absorber unit cell consist of two resonators named as Structure-A and Structure-B. Both the resonators are printed on the upper surface of dual side copper coated FR-4 epoxy glass substrate of thickness 0.8 mm. The proposed absorber structure offers three distinct absorption peaks of 99.67%, 99.48%, and 99.42% with FWHM bandwidth of 170 MHz (4.11-4.28 GHz), 350 MHz (9.17-9.52 GHz), and 480 MHz (11.24-11.72 GHz) at 4.19 GHz, 9.34 GHz, and 11.48 GHz, respectively, under normal incidence. In addition to above, the four fold symmetry of proposed absorber structure make it polarization independent. Proposed absorber structure also offers more than 80% absorptivity at different angle of incidence (up to 60°) under transvers electric and transvers magnetic polarization states. The designed absorber unit cell has compactness of 0.11 λ0 × 0.11 λ0 with ultra-thin thickness of 0.0111 λ0, where λ0 is the free space wavelength with respect to the lowest absorption peak of 4.19 GHz. Absorption mechanism of proposed unit cell has been discussed with the help of normalized input impedance, electric field distribution, and surface current density plots. In order to discuss the metamaterial property of proposed absorber unit cell dispersion diagram has been shown.
26 July 2019 in IEEE Transactions on Circuits and Systems II: Express Briefs
A simple and compact filter structure for lowpass and dual-band bandpass response with controllable transmission zeros/center frequencies/3-dB bandwidth is proposed in this paper. Proposed filter structure uses two-unit cells, which contains λ/5 length of folded coupled line and open circuited L-shape strip. A lowpass and a bandpass response has been realized by a unit cell due to formation of LC series and shunt tank circuit. Another bandpass response has been achieved by connecting two-unit cells with a strip. In literature, there are very few designs which can achieve two different type of filtering responses. The proposed design is compact as compared to the state-of-the-art and also the two filtering responses have been achieved with improved selectivity and impedance matching due to formation of additional tank circuit. The size of the filter excluding feed line is 0.13λg×0.06λg (15.5 mm × 7.2 mm) at the 3dB cut-off frequency (1.05 GHz) of the lowpass filter. The position of transmission zeros/center frequencies and 3-dB bandwidth characteristics can be separately controlled by varying the physical parameter of designed filter structure. The filter performance has been validated through electromagnetic simulation and experimental measurements. The metamaterial properties of designed filter has been verified by its dispersion diagram.
This proposed work describes a miniaturized and simple power divider that uses coupled lines for triple-band filtering. The intended setup included an isolation resistor connecting the output feed lines through Structure-3 and coupled line-based microstrip resonators connected to the input feed line. The presented power divider achieves three passbands with a filtering response. The first and second passbands are achieved by the coupled line that includes Resonator-1 and Resonator-2 of the proposed structure. The third passband is realized due to Resonator-3. Furthermore, by varying the structural parameter of the designed triple-band filtering power divider, the resonance frequencies of all three passbands can be controlled because of changes in their equivalent lumped parameters. The resonance frequency mainly depends on its equivalent inductance and capacitance value. For validation of the simulation result, the filtering power divider structure has been fabricated and tested. The experimental results denote that the prototype has a fractional bandwidth (|S21|<-3 dB) of about 20.0 % (1.1 GHz to 1.35 GHz), 37.0 % (2.0 GHz to 2.9 GHz), and 15.0 % (3.25 GHz to 3.8 GHz) respectively for first, second and third pass-bands. This arrangement shows isolation above 18 dB for all three bands with a downsized of 0.1λ g × 0.12λ g (25 mm × 30 mm) according to the operating frequency of the first frequency passband. The triple band performance of the developed component shows a good input reflection coefficient. The operating frequencies, which are suitable for the application of L -band, WLAN, sub-6 GHz band of 5G, which include 1.23 GHz, 2.41 GHz, and 3.55 GHz.
1 May 2018 in AEU - International Journal of Electronics and Communications