In this paper, a new frequency selective surface (FSS) based isolation technique is proposed for multiple-input-multiple-output (MIMO) antennas. In the proposed method, a conventional ground plane of monopole based MIMO antenna is replaced with FSS to improve the isolation between the antenna elements as well as to reduce MIMO antenna radar cross-section (RCS). In this paper, two FSS designs have been presented, and they are named as FSS and M_FSS. M_FSS is a slightly modified version of FSS. With FSS, isolation enhancement and RCS reduction have been achieved by altering antenna characteristics. With M_FSS, the same can be achieved by preserving the antenna characteristics. The RCS reductions of 25 dBsm and 20 dBsm have been achieved by replacing the PEC ground plane with FSS and M_FSS respectively. Also, by using the proposed FSS, a stable RCS reduction up to 60° for TE polarization and up to 45° for TM polarization has been achieved. The proposed MIMO antenna with FSS has been fabricated and the simulation results are experimentally verified.
This article claims, an investigation on compact ultrathin triple band polarization independent metamaterial absorber for microwave frequency applications. The proposed absorber unit cell consist of two resonators named as Structure-A and Structure-B. Both the resonators are printed on the upper surface of dual side copper coated FR-4 epoxy glass substrate of thickness 0.8 mm. The proposed absorber structure offers three distinct absorption peaks of 99.67%, 99.48%, and 99.42% with FWHM bandwidth of 170 MHz (4.11-4.28 GHz), 350 MHz (9.17-9.52 GHz), and 480 MHz (11.24-11.72 GHz) at 4.19 GHz, 9.34 GHz, and 11.48 GHz, respectively, under normal incidence. In addition to above, the four fold symmetry of proposed absorber structure make it polarization independent. Proposed absorber structure also offers more than 80% absorptivity at different angle of incidence (up to 60°) under transvers electric and transvers magnetic polarization states. The designed absorber unit cell has compactness of 0.11 λ0 × 0.11 λ0 with ultra-thin thickness of 0.0111 λ0, where λ0 is the free space wavelength with respect to the lowest absorption peak of 4.19 GHz. Absorption mechanism of proposed unit cell has been discussed with the help of normalized input impedance, electric field distribution, and surface current density plots. In order to discuss the metamaterial property of proposed absorber unit cell dispersion diagram has been shown.
A polarization independent conformal wideband metamaterial absorber has been proposed in this study. The proposed absorber unit cell consists of a circle and a slotted sector, loaded with four lumped resistors between them to improve the absorption bandwidth. Measured and simulated results exhibit more than 90% absorption in the frequency band from 3.90 GHz to 10.5 GHz under the normal incidence angle, and the fractional bandwidth is 91.6%. The proposed absorber is polarization independent due to the symmetrical nature. The absorber unit cell is compact in configuration with a unit cell size of 0.16 λo × 0.16 λo, where λo is the wavelength at 3.9 GHz and the substrate thickness is 0.098 λo. Once the proposed absorber is wrapped on the cylindrical surface, it shows good absorptivity in the absorption frequency band. The effects of many designed parameters have been studied to understand the performance of the wideband absorber. To recognize the absorption phenomenon of the absorber, normalized impedance, electric field distribution, and surface current density have been demonstrated. Finally, the proposed conformal absorber fabricated and measured the absorption for flat and curved surfaces, which exhibits good agreement between the simulated and the experimental results.
29 May 2019 in IEEE Transactions on Antennas and Propagation
In this paper, a multifunctional reconfigurable filter which can work in three operating modes has been presented. The three operating modes are: all-pass filter, tunable bandpass filter, and tunable band reject filter. The developed filter has been integrated with an ultra-wideband antenna which results in a reconfigurable filtenna. Such four filtennas are arranged on a single substrate and sufficient isolation is maintained between them by using reflectors to form a four-port multiple-input-multiple-output (MIMO) filtenna which can work for Mid-band 5G cognitive radio (CR) applications. By controlling the operating modes of the filter, the final developed structure gives us sensing and communicating antennas for spectrum-interweave and spectrum-underlay CR. Simulated results have been validated by carrying out the measurement. MIMO performance of the proposed antenna has been evaluated by measuring ECC and found suitable for practical applications.
1 December 2015 in IEEE Antennas and Wireless Propagation Letters
A wideband circularly polarized cubic-shaped dielectric resonator antenna (DRA) was excited with a new question-mark-shaped microstrip feed, which provides two orthogonal modes with a quadrature phase difference, hence generating circular polarization. The proposed antenna offers measured - 10-dB impedance bandwidth of 35.35% (at center frequency 3.14 GHz) and measured 3-dB axial-ratio bandwidth of 20.62% (centered on 3.29 GHz) in the broadside direction. The proposed DRA shows the maximum gain and radiation efficiency of 1.51 dB and 90.65%, respectively, in the operating band. It was observed that the proposed antenna is left-hand circular polarized. This antenna is useful for WiMAX (3.3-3.7 GHz) applications.
In this Letter, a mu‐negative metamaterial (MTM) filter‐based novel decoupling technique is presented for multiple input multiple output (MIMO) antennas. The design process has been described in a systematic manner, starting with the basic two port monopole antenna and then adding cancellation network and finally the proposed MIMO antenna by adding the matching network. Since the presented decoupling network is developed using MTM structure, good isolation between the antennas is achieved by maintaining compactness. The presented isolation technique can be used in different applications like in developing circularly polarized and multi‐band MIMO antennas. As an example, two port circularly polarised MIMO antenna design is also presented. The proposed designs have been fabricated and the simulation results are experimentally verified.