Dildara Tugelbayeva

Ms. Dildara Tugelbayeva

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 September 2024 in Processes
Verified
Journal Article
Open access
PDF file
STSandugash Kudaibergenovna Tanirbergenova
Sandugash Kudaibergenovna Tanirbergenova
ATAisulu Tagayeva
Aisulu Tagayeva
Cesare Oliviero RossiCesare Oliviero Rossi
Cesare Oliviero Rossi
MPMichele Porto
Michele Porto
PCPaola Caputo
Paola Caputo
YTYerbol Tileuberdi
Yerbol Tileuberdi
Oil sludge is one of the main pollutants generated by the oil industry. Due to serious pollution and increasing oil production, problems arise every year in the effective treatment of oil sludge. The current study examines the composition and physicochemical characteristics of oil sludge, as well as traditional and new methods for processing oil sludge. With the tightening of environmental protection requirements, oil sludge quality reduction, recycling, and harmless treatment technologies will become necessary in the future. The primary task was to determine the composition of tank oil sludge, separate it from mechanical impurities, and study the influence of ultrasonic treatment and subsequent atmospheric distillation on the extract. The separation of the concentrate and the composition of the tank oil sludge, using an extracted mixture of hexane and benzene, are considered. The use of modern SEM methods, elemental analysis, NMR analysis, IR, ultrasound, and GC–mass spectrometry made it possible to characterize the organic part of reservoir oil sludge and its distillation products. First, 300 g of tank oil sludge was preheated and mixed with 300 mL of solvent (hexane:benzene = 1:1). After mixing with the solvent, the result mixture was filtered. Then, it was placed in an ultrasonic bath and exposed to ultrasound at a frequency of 100 kHz for 30 min. After processing, it was extracted in a Soxhlet apparatus at a temperature of 65 °C to isolate the extract. The resulting extract was analyzed on a gas chromatograph with mass detection. The composition of the extract was as follows (in %): hexane—83.99; total hydrocarbon isomers—7.12; n-hydrocarbons—2.52; benzene—6.37%. At a temperature of 85 °C, the benzene yield was 65.85%. It has been established that the fractions obtained through the distillation of oil sludge at temperatures of 65–85 °C have improved dissolving capacity. It has also been shown that the use of these fractions promotes an increase in the content of hydrocarbon isomers by 12–13% in the extract composition.

10 September 2025 in Processes
Verified
Journal Article
Open access
PDF file
STSandugash Kudaibergenovna Tanirbergenova
Sandugash Kudaibergenovna Tanirbergenova
DTDildara Tugelbayeva
Dildara Tugelbayeva
NZNurzhamal Zhylybaуeva
Nurzhamal Zhylybaуeva
AAAitugan Aitugan
Aitugan Aitugan
KTKairat Tazhu
Kairat Tazhu
Zulkhair MansurovZulkhair Mansurov
Zulkhair Mansurov
Natural clinoptilolite from the Shankhanai deposit (Kazakhstan) was modified via acid and thermal treatments to improve its physicochemical and catalytic properties. The zeolite was activated using 10% nitric acid alone, nitric acid followed by thermal treatment (600 °C), and a mixed acid solution (10% HNO3 + 5% CH3COOH) followed by mild thermal treatment (280 °C). Structural, textural, and thermal changes were characterized by XRD, FTIR, BET, TGA, SEM, and EDX. Nitric acid treatment increased the BET surface area from 4.95 to 59.9 m2/g but reduced crystallinity, whereas the dual-acid approach enhanced porosity and acidity while preserving framework integrity. Preliminary catalytic testing in thiophene hydrodesulfurization (HDS) revealed improved conversion (up to 20.7%) in the absence of active metals, confirming the potential of modified clinoptilolite as a catalyst support. The dual-acid method presents a promising, eco-friendly pathway for producing thermally stable and catalytically active zeolitic materials, suitable for selective hydrodesulfurization of thiophene.

28 May 2021 in Reaction Kinetics, Mechanisms and Catalysis
Verified
Journal Article
Closed access
PDF file
AAAitugan Aitugan
Aitugan Aitugan
STSandugash Kudaibergenovna Tanirbergenova
Sandugash Kudaibergenovna Tanirbergenova
YTYerbol Tileuberdi
Yerbol Tileuberdi
OYOnuralp Yucel
Onuralp Yucel
DTDildara Tugelbayeva
Dildara Tugelbayeva
YOYerdos Ongarbayev
Yerdos Ongarbayev

25 June 2026 in C
Verified
Journal Article
Open access
PDF file
STSandugash Kudaibergenovna Tanirbergenova
Sandugash Kudaibergenovna Tanirbergenova
DTDildara Tugelbayeva
Dildara Tugelbayeva
NZNurzhamal Zhylybaуeva
Nurzhamal Zhylybaуeva
AAAitugan Aitugan
Aitugan Aitugan
AAArailym Otegenkyzy Akimbek
Arailym Otegenkyzy Akimbek
Zulkhair MansurovZulkhair Mansurov
Zulkhair Mansurov
Waste lubricating oils (WLOs) represent a major stream of hazardous petroleum-based residues, with global generation exceeding 24 million tons annually. Improper disposal of WLOs poses risks to soil, water, and air quality, while their chemical composition makes them a potential secondary resource within circular economy frameworks. This review summarizes conventional, advanced, and emerging technologies reported for the recycling and valorization of WLOs into high-value petrochemicals and carbon-based materials. Established processes such as acid–clay treatment, solvent extraction, and vacuum distillation are discussed together with more recent approaches, including catalytic upgrading, hydrotreatment, membrane separation, and thermochemical conversion methods such as pyrolysis and catalytic cracking. Reported data on process performance, environmental considerations, techno-economic indicators, and life cycle assessment outcomes are comparatively analyzed to outline current trends, technical challenges, and future development directions in WLO recycling. Particular attention is given to thermochemical pathways capable of generating carbonaceous materials, including carbon black, porous carbons, and functional carbon nanostructures with potential applications in adsorption, catalysis, electrochemical systems, and tribological formulations. Hybrid and integrated process configurations described in the literature are highlighted for their potential to improve recovery efficiency, enhance product quality, and reduce environmental burdens. In addition, recent life cycle assessment (LCA) and techno-economic analysis (TEA) studies are reviewed to provide insight into the environmental and economic implications of advanced re-refining systems. Overall, the reviewed literature indicates that WLO recycling represents not only an important element of sustainable lubricant management but also a promising waste-to-carbon strategy for the production of value-added carbon-based materials and petrochemical products.

21 May 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
STSandugash Kudaibergenovna Tanirbergenova
Sandugash Kudaibergenovna Tanirbergenova
DTDildara Tugelbayeva
Dildara Tugelbayeva
NZNurzhamal Zhylybaуeva
Nurzhamal Zhylybaуeva
AAAitugan Aitugan
Aitugan Aitugan
AAArailym Otegenkyzy Akimbek
Arailym Otegenkyzy Akimbek
Zulkhair MansurovZulkhair Mansurov
Zulkhair Mansurov
Waste lubricating oils (WLOs) represent a major stream of hazardous petroleum-based residues, with global generation exceeding 24 million tons annually. Improper disposal of WLOs poses risks to soil, water, and air quality, while their chemical composition makes them a potential secondary resource within circular economy frameworks. This review summarizes conventional, advanced, and emerging technologies reported for the recycling and valorization of WLOs into high-value petrochemicals and carbon-based materials. Established processes such as acid–clay treatment, solvent extraction, and vacuum distillation are discussed together with more recent approaches, including catalytic upgrading, hydrotreatment, membrane separation, and thermochemical conversion methods such as pyrolysis and catalytic cracking. Reported data on process performance, environmental considerations, and economic aspects are comparatively analyzed to outline current trends and technical challenges in WLO recycling. Particular attention is given to thermochemical pathways capable of generating carbonaceous materials, including carbon black, porous carbons, and functional carbon nanostructures with potential applications in adsorption, catalysis, electrochemical systems, and tribological formulations. Hybrid and integrated process configurations described in the literature are highlighted for their potential to improve recovery efficiency, enhance product quality, and reduce environmental burdens. In addition, recent life cycle assessment (LCA) and techno-economic analysis (TEA) studies are reviewed to provide insight into the environmental and economic implications of advanced re-refining systems. Overall, the reviewed literature indicates that WLO recycling represents not only an important element of sustainable lubricant management, but also a promising waste-to-carbon strategy for the production of value-added carbon-based materials and petrochemical products.

10 October 2020 in Горение и Плазмохимия
Verified
Journal Article
Open access
PDF file
AAAitugan Aitugan
Aitugan Aitugan
STSandugash Kudaibergenovna Tanirbergenova
Sandugash Kudaibergenovna Tanirbergenova
YTYe. Tileuberdi
Ye. Tileuberdi
DTDildara Tugelbayeva
Dildara Tugelbayeva
This work is devoted to the study of the influence of aluminum oxide content on the activity of cobalt catalysts in the reaction of selective hydrogenation of acetylene to ethylene. Cobalt catalysts modified with aluminum oxide having size between 50 to 500 nm were synthesized. Chemical contents and structure of carrier were investigated. The catalytic activity of 5 % Со /clay and 5% Co/SiAl catalysts at acetylene hydrogenation was studied in the temperature range 100-180 , with a ratio of 1:2 of acetylene and hydrogen. The ethylene yield is 87.8 % in modifying the cobalt catalyst with aluminum oxide, whereas with the same process parameters, the ethylene yield is 72 %. 5 % Cobalt catalysts modified with 1.5 % aluminum oxides are more active in hydrogenation acetylene process than 5 % Со /clay 450 ℃ catalyst.