The fluid inclusion technique was utilized to reveal the petroleum charging events in the lithologic reservoirs embraced in the Late Eocene Shahejie Formation of the Minfeng sag, Bohai Bay Basin, East China. Petrography, fluorescence microspectrometry, and microthermometry were systematically carried out on 15 double-polished thin sections handled from reservoir core samples of the third Member of the Shahejie Formation. The results show that three generations of petroleum inclusions with fluorescence colors of yellow, yellowish green and bright blue were entrapped along the healed fractures in detrital quartz grains of these samples. The fluorescence features of petroleum inclusions illustrate that inclusion oils have different maturities and were products of source rocks at different stages. In addition, the trapping time of petroleum inclusions was determined by combining the homogenization temperatures of their coeval aqueous inclusions with thermal-burial histories. By integrating the petrographic occurrence, characteristics of petroleum inclusions, and the maturity and the trapping time of the studied inclusion oils, it is jointly constrained that the lithologic reservoirs of the Late Eocene Shahejie Formation in the Minfeng sag underwent three petroleum chargings, which occurred during 37.8~25 Ma, 11.7~3.5 Ma and 1.4~0.1 Ma, respectively. The petroleum from each charging period migrated from the center of the sag to the edge, and the lower the maturity of the migrating petroleum, the longer the migration duration.
New discoveries and breakthroughs have been made in recent years in the deep parts of the central Junggar Basin, where the Jurassic reservoirs are unconventionally dense with abnormal overpressure development. The development and distribution of overpressure in this basin and the influence of overpressure on petroleum accumulation were analyzed. There are two extremely high overpressure systems in the Jurassic Badaowan and Xishangyao formations, from where the abnormal overpressure in the strata overburdened Jurassic reservoirs was transferred. Paleopressure simulations show that hydrocarbon generation pressurization of the main source rocks in the Badaowan Formation is a process characterized by at least two phases of overpressure increase followed by a phase of overpressure release. Overpressure inhibits the thermal evolution of source rocks in the study area, resulting in lower values of maturity parameter Ro at depths > 4500 m compared with the normal values at depths < 4500 m. The deep reservoirs > 4500 m are very dense, with strong compaction and little retention of primary pore space, indicating the overpressure did not protect the primary pores, while the over-pressured acidic fluid promoted the formation of dissolved pore space. Overpressure and faults are two key factors of petroleum migration, and they jointly control petroleum accumulation in the central Junggar Basin.
The successful development of shale gas and oil in North America has created considerable interest in shale. The analysis of genetic types, the sedimentary environment, and the mudstone development mechanism within sequences is critical for evaluating shale gas and oil exploration prospects, exploration favorable zones, and resource potential. This study focused on the shale of Shahejie Formation in Dongying Depression of Bohai Bay Basin. Shale lithofacies division, geochemical analysis, and well-log analysis were performed for a sedimentary environment and its related elemental response characteristics’ identification. Based on the results, we concluded that the sedimentary environment of the lake basin evolved from the saltwater lake to the ambiguous lake and then the open lake to the delta. In response, we observed gradually decreasing Sr/Ba and Ca/Mg ratios and increasing Rb/Ca and Fe/Mn ratios during the whole process during the reduction of the salinity and the decrease in PH value and sediments’ transport distance. The relationship between ratio elements and high-frequency sequences was initially established within the shale strata. Our results show that ratios of Sr/Ba and Ca/Mg ratios near the sequence boundary are relatively low, and ratios of Fe/Mn and Rb/Ca are relatively high, while ratios of Sr/Ba and Ca/Mg near the flooding surface are relatively high, and ratios of Fe/Mn and Rb/Ca are relatively low. Those features can be used as a marker for high-frequency sequence division of shale strata. Our results provided a new theoretical basis and technical method for shale gas and oil exploration and development.
Properly determining reservoir wettability is crucial for enhancing oil recovery and optimizing production strategies; this is particularly the case for tight oil reservoirs. The lower-fourth member of the Shahejie Formation (Es4x) in the Bonan Sag of the Bohai Bay Basin is a typical tight sandstone play, which is characterized by a low permeability and poor fluid mobility and quite variable daily production. Despite efforts in reservoir stimulation, the incremental production remains negligible. A detailed investigation of the reservoir wettability was carried out using four representative tight sandstone samples from Es4x to better understand the production behavior of the tight oil reservoir. We employed a suite of analytical methods, including Environmental Scanning Electron Microscopy, contact angle measurement, spontaneous imbibition, and Nuclear Magnetic Resonance, to comprehensively evaluate the wettability characteristics of the reservoir at different scales. Two samples, C1 and C2, exhibit oil-wet characteristics at both pore and macro scales, with Sample C1 showing weak oil-wet behavior and Sample C2 demonstrating strong oil-wet behavior. In contrast, the other samples, C3 and C4, display strong water-wet characteristics across different scales. The pore size threshold between water-wet and oil-wet conditions for samples C1 and C2 is 0.1 μm, while that for samples C3 and C4 is 1 μm. Grain-coating chlorite and grain-coating illite are the primary clay minerals contributing to the oil-wet pore walls of the reservoir, whereas dispersed sheet-like chlorite and rosette chlorite predominantly exhibit water-wet characteristics. The tight oil reservoir in Es4x exhibits pronounced wettability heterogeneities, with distinct regions displaying either oil-wet or water-wet characteristics, significantly impacting the mobility and producibility of the tight oil in this reservoir interval.
Taking the layered argillaceous limestone in the upper Es4 in the Dongying Sag as the research object, the geochemical analysis of major, trace, and rare earth elements (REEs) established the response relationship between REE distribution characteristics and sedimentary diagenesis. The average values of total light REE ()/total heavy REE () of micrite calcite and argillaceous laminae are 6.75 and 4.06, respectively. The LREEs and HREEs are differentiated, consistent with the distribution pattern of REEs in the crust. Th and U elements are more enriched in the sediments in the lacustrine sedimentary environment than in the diagenetic calcite veins. In primary sediments (argillaceous clay and micrite calcite laminae), LREEs are more enriched, HREEs are depleted, and Eu shows positive anomaly-enrichment characteristics. The LREEs and HREEs of the sparry calcite veins are lower than those of the original sediment argillaceous clay and micrite calcite, showing characteristics of a negative anomaly depletion. Sparry calcite veins originate from diagenetic fluid crystallization and precipitation and have the characteristics of low Th and U, evident positive anomalies of Sr and Eu, and substantial depletion of La. The distribution patterns of REEs within the four components of the laminated argillaceous sparry limestone reflect the order of REE distribution from primary sediment laminae (argillaceous clay and micrite calcite) to diagenetic laminae (calcite veins). Compared with the North American shale, the four components of the contact surface between the argillaceous and bright crystalline laminae, the micrite calcite, the calcite veins, and the argillaceous laminae all showed weak negative anomalies and positive anomalies. The fractionation degree between LREEs and HREEs reflected by and is in descending order: the interface between the argillaceous lamina and sparry calcite lamina, micritic calcite, calcite vein, and argillaceous lamina. The argillaceous laminar material has the characteristics of basalt REEs, indicating that the terrestrial debris and argillaceous lacustrine shale in the upper Es4 member of the Niuzhuang subsag are primarily derived from the basic extrusive rocks of the Qingtuozi bulge. REE differentiation is most noticeable at the interface between the argillaceous lamina and calcite vein, proving the directionality of REE differentiation from the original sedimentary lamina to the diagenetic lamina. Shale in the study area is primarily deposited below the redox interface of water at a certain depth, and the deposition rate is stable and slow, providing good conditions for preserving organic matter.
1 January 2023 in Earth Science-Journal of China University of Geosciences