Due to their electrochemical and economical characteristics, pencil graphite electrodes (PGEs) gained in recent years a large applicability to the analysis of various types of inorganic and organic compounds from very different matrices. The electrode material of this type of working electrodes is constituted by the well-known and easy commercially available graphite pencil leads. Thus, PGEs are cheap and user-friendly and can be employed as disposable electrodes avoiding the time-consuming step of solid electrodes surface cleaning between measurements. When compared to other working electrodes PGEs present lower background currents, higher sensitivity, good reproducibility, and an adjustable electroactive surface area, permitting the analysis of low concentrations and small sample volumes without any deposition/preconcentration step. Therefore, this paper presents a detailed overview of the PGEs characteristics, designs and applications of bare, and electrochemically pretreated and chemically modified PGEs along with the corresponding performance characteristics like linear range and detection limit. Techniques used for bare or modified PGEs surface characterization are also reviewed.

The even growing production of both well-known and new derivatives with pharmaceutical action involves the need for developing facile and reliable methods for the analysis of these compounds. Among the widely used instrumental techniques, the electrochemical ones are probably the simplest and the most rapid, also having good performance characteristics. However, the key tool in electroanalysis is the working electrode. Due to the inherent electrochemical and economic advantages of the pencil graphite electrode (PGE), the interest in its applicability in the analysis of different analytes has continuously increased in recent years. Thus, this paper aims to review the scientific reports published in the last 10 years on the use of the disposable eco- and user-friendly PGEs in the electroanalysis of compounds of pharmaceutical importance in different matrices. The PGE characteristics and designs (bare or modified with various types of materials), along with their applications and performance parameters (e.g., linear range, limit of detection, and reproducibility), will be discussed, and their advantages and limitations will be critically emphasized.

Extraction of polyphenols from sea buckthorn leaves using microwave-assisted extraction (MAE) is described. The influence of different parameters on the extraction process (reactor type, stirring rate, extraction time, temperature, ethanol/water ratio) was studied. The polyphenolic extracts were analyzed in order to determine the total phenolic content (TPC) either by the Folin–Ciocalteu method or by differential pulse voltammetry (DPV), and the concentration of the main polyphenolic compounds by high-performance liquid chromatography (HPLC). The specific microwave energy was also determined. MAE resulted in a shorter extraction time (7.5 versus 30 min for the conventional method). The best results for MAE were obtained at a temperature of 90°C, using a solvent/plant ratio of 20/1 and 50% ethanol in the extraction solvent. The highest values of antioxidant capacity were obtained for polyphenolic extracts resulted from microwave extraction.