In elastic wave systems, combining the powerful concepts of resonance and spatial grading within structured surface arrays enable resonant metasurfaces to exhibit broadband wave trapping, mode conversion from surface (Rayleigh) waves to bulk (shear) waves, and spatial frequency selection. Devices built around these concepts allow for precise control of surface waves, often with structures that are subwavelength, and utilise Rainbow trapping that separates the signal spatially by frequency. Rainbow trapping yields large amplifications of displacement at the resonator positions where each frequency component accumulates. We investigate whether this amplification, and the associated control, can be used to create energy harvesting devices; the potential advantages and disadvantages of using graded resonant devices as energy harvesters is considered. We concentrate upon elastic plate models for which the A ₀ mode dominates, and take advantage of the large displacement amplitudes in graded resonant arrays of rods, to design innovative metasurfaces that trap waves for enhanced piezoelectric energy harvesting. Numerical simulation allows us to identify the advantages of such graded metasurface devices and quantify its efficiency, we also develop accurate models of the phenomena and extend our analysis to that of an elastic half-space and Rayleigh surface waves.

We experimentally demonstrate that a rainbow-based metamaterial, created by a graded array of resonant rods attached to an elastic beam, operates as a mechanical delay-line by slowing down surface elastic waves to take advantage of wave interaction with resonance. Experiments demonstrate that the rainbow effect reduces the amplitude of the propagating wave in the host structure. At the same time, it dramatically increases both the period of interaction between the waves and the resonators and the wavefield amplitude in the rod endowed with the harvester. Increased energy is thus fed into the resonators over time: we show the enhanced energy harvesting capabilities of this system.

We experimentally achieve wave-mode conversion and rainbow trapping in an elastic waveguide loaded with an array of resonators. Rainbow trapping is a phenomenon that induces wave confinement as a result of a spatial variation of the wave velocity, here promoted by gently varying the length of consecutive resonators. By breaking the geometrical symmetry of the waveguide, we combine the wave-speed reduction with a reflection mechanism that mode converts flexural waves impinging on the array into torsional waves traveling in opposite directions. The framework presented herein may open opportunities in the context of wave manipulation through the realization of structural components with concurrent wave-conversion and energy-trapping capabilities.