The use of optimization methods in engineering is growing, allowing the best possible way to fulfill the requirements of the project. For vehicle suspensions, there are various conditions, which involve comfort, safety, stability, maneuverability, among others. A safety and stability evaluation is carried out by several tests, including Double Lane Change. In this maneuver, the vehicle must change lanes quickly twice, allowing it to be assessed for stability in sudden movements. For ride comfort, it is common for the design to be based on the vehicle’s natural vibration frequencies. In this context, this work aims to present a methodology for optimizing the suspension parameters of a vehicle, based on the natural frequencies of vibration and the simulation of a Double Lane Change maneuver. For that, it is employed vertical and lateral dynamics mathematical models, with hypotheses that allow the adequate adaptation to the represented phenomena. Finally, Particle Swarm Optimization (PSO) is used, which is a stochastic algorithm, based on nature. It has low computational cost, with reasonable results, allowing the parameters to be estimated and comprising the two objectives simultaneously.
In this paper, the computer-aided vehicle dynamic analysis of a 6x6 heavy military truck is presented and examined. For the analysis, a MATLAB/Simulink® platform is used to design and model a truck. The vehicle configuration taken into account for the analysis is the powertrain (engine, gear box, transfer gear, differential), suspension, steering system and tire model according to the Pacekja 89’ formulation. In addition, the effect of the rolling resistance and drag is considered, in order to represent the vehicle behavior as real as possible. The longitudinal dynamic and lateral dynamic are formulated. First, the longitudinal dynamic model is established by means of implementation of the weight transfer function. The vehicles are considered as rigid bodies with 1 degree of freedom. Second, the vehicular planar model with three wheels, well known as bicycle model, is applied following the North Atlantic Treaty Organization double line change maneuver test reaching 3 degree of freedom. The driver behavior is represented by using an adaptive model predictive control varying the longitudinal velocity. The forces for braking, inertia of the rotating components, the energy lost in the powertrain, and the effect of dive squat and rollover. The numerical simulation results are shown and compared with a full-vehicle model formed by using Mechanical Simulation Corporation’s truckSIM®. There were chosen simulation scenarios applied to the model to observe the effects of different parameters concerning the dynamic behavior, and also prepared in truckSIM® environment. The main contributions of this article are the development of the vehicular model, through the use of block diagrams in a reliable and relatively simple programming code such as MATLAB/Simulink®, with innovative tools used in the control of autonomous vehicle driving and the flexibility to adapt said model to different environmental conditions and different vehicle parameters.
29 June 2020 in The Journal of Defense Modeling and Simulation: Applications, Methodology, Technology
Heavy vehicles have a wide range of applicability in our daily lives: buses, commercial trucks, and even defense vehicles are important to transport people and goods and provide protection. However, this field is not widely covered by the scientific literature in many aspects regarding their dynamic behavior, as most works tend to focus on personal vehicles (cars). This article elaborates on heavy vehicle trafficability on many different terrains or their capacity to operate in those soils, using an analysis based on the Wong–Reece method with deformable soil–rigid tire approximation. It also develops a dynamic model, using MATLAB SimulinkTM software, to show how heavy vehicle performance both kinematically and dynamically is influenced by the soil. To test both models, a numerical case study was conducted, using common parameters for wheeled heavy vehicles as inputs for the dynamic. Results indicate that heavy vehicles are often incapable of operating in highly deformable soils, sinking deeply into the ground; the soil also affects heavily the vehicle maximum velocity and gear from almost [ ] km/h in Greenville Loam soil to less than [ ] km/h in Upland Sandy Loam soil.
1 January 2019 in International Journal of Vehicle Systems Modelling and Testing
This article presents a new model for dynamic simulation of rigid soil-deformable tyre approximation. Previous models are not ready to be implemented in computational simulations, for two main reasons: 1) they do not cover all possible operational regimes of a wheel only slip values between 0 and 1, whereas the wheel can assume both values superior to 1 and negative values; 2) most of them offer a bad approximation for calculation of contact parameters such as length, width and area of contact with quadratic mean errors superior to 100%. Therefore, this article extends the already-established Julien method for deformable soil to all slip values, and provides a new method for contact area calculation that reduces the quadratic mean error to the order of 10%, relative to empirical data. This is important for dynamic simulations of vehicles, as the deformable tyre-rigid soil method is applicable for almost all situations in the automotive regime; and applications are limitless, from estimating the influence of new parts adapted to an automobile, to using it to simulate the dynamics of a VR-model.