The use of optimization methods in engineering is growing, allowing the best possible way to fulfill the requirements of the project. For vehicle suspensions, there are various conditions, which involve comfort, safety, stability, maneuverability, among others. A safety and stability evaluation is carried out by several tests, including Double Lane Change. In this maneuver, the vehicle must change lanes quickly twice, allowing it to be assessed for stability in sudden movements. For ride comfort, it is common for the design to be based on the vehicle’s natural vibration frequencies. In this context, this work aims to present a methodology for optimizing the suspension parameters of a vehicle, based on the natural frequencies of vibration and the simulation of a Double Lane Change maneuver. For that, it is employed vertical and lateral dynamics mathematical models, with hypotheses that allow the adequate adaptation to the represented phenomena. Finally, Particle Swarm Optimization (PSO) is used, which is a stochastic algorithm, based on nature. It has low computational cost, with reasonable results, allowing the parameters to be estimated and comprising the two objectives simultaneously.
With the increasing use of automatic transmissions in passenger vehicles, there is a growing need for improved gear shifting control strategies that aim to enhance performance and fuel efficiency. This paper introduces a knowledge-based fuzzy control system designed specifically for automatic transmissions in light vehicles. The proposed system utilizes a fuzzy inference system as the controller, enabling the emulation of the driver’s perceptions during the gear shifting process. Consequently, the input signal consists of variables that are either sensitive to or observable by the driver, while the output represents the selected gear. The paper evaluates three distinct control strategies, each based on different inputs. These inputs include the longitudinal velocity of the vehicle, the angular velocity of the engine, or a combination of both, along with the time-derivative of the throttle valve opening. Through the evaluation, it is observed that the combination of inputs yields significantly improved performance. Therefore, the methodology presented in this paper demonstrates that the combined input approach is more effective for gear shifting control.