As a part of the strategic research program “Advanced technologies for energy generation: Development of a technology for highly efficient zero-emission coal-fired power units integrated with CO₂ capture”, a mobile CO₂ absorption pilot plant was erected. The main purpose of the pilot plant was to demonstrate the post-combustion technology in conjunction with a coal-fired power plant. The pilot plant captured CO₂ by chemical absorption in amine-based solvents, which was considered to be the best adapted technology to the requirements of coal-fired power plants and suitable for retrofitting to existing units. The pilot plant captured up to 1000 kg/day of CO₂ from the power plant’s flue gases with CO₂ recovery exceeding 90 %. The flexible process flowsheet of the pilot plant offered high potential for the validation of various improvements, which were designed to reduce the process energy demand and to increase the CO₂ recovery. This paper summarizes the initial operation experience at the TAURON Łaziska Power Plant in Poland. Selected first results obtained are presented and discussed. The initial campaigns utilized 20 and 30 wt% monoethanolamine (MEA) solutions recognized as baseline solvents that were suitable for comparative purposes. The initial campaigns at the pilot plant successfully demonstrated reliable operation and promising results.

Thermal energy storage technologies are essential for balancing energy demand and supply. There are three main types: sensible heat, latent heat, and thermochemical energy storage. Among them, thermochemical energy storage offers the highest energy density (1–3 GJ/m³) and long-term storage capability. Salt hydrates have attracted attention as energy storage materials due to their low cost, wide availability, and operating temperatures being well-suited for residential and low-temperature applications. This review focuses on the use of salt hydrates in sorption-based thermochemical energy storage systems. It summarizes the current state of knowledge, including screening studies of various salt hydrates, their thermodynamic and operational limitations, advantages, and performance in composite materials. This review also covers recent projects and common reactor designs used in TCES applications. Based on the literature analysis, the most promising salt hydrates for sorption-based TCES systems include SrCl₂, SrBr₂, K₂CO₃, MgSO₄, MgCl₂, and CaCl₂. Despite the high theoretical energy density of many salt hydrates, future work should focus on experimental studies in large-scale reactor systems to better evaluate the practical discharge behavior of the energy storage system beyond theoretical hydration enthalpies or small-scale thermal analyses.

Hydrogen (H₂) is a key energy carrier and industrial feedstock, with growing interest in its production from syngas and water–gas shift (WGS) syngas. Effective purification methods are essential to ensure high hydrogen purity for various applications, particularly fuel cells, chemical synthesis, or automotive fuel. Pressure swing adsorption (PSA) has emerged as a dominant separation technology due to its efficiency, scalability, and industrial maturity. This study reviews PSA-based hydrogen purification and proposes an experimental framework based on literature insights. Key process variables influencing PSA performance, such as adsorbent selection, cycle sequences, pressure conditions, and flow configurations, are identified. The proposed experimental methodology includes breakthrough adsorption studies and PSA process evaluations under dynamic conditions, with variations in column configuration, adsorption pressure (8–9 bar), and process concept (Berlin and Linde Gas). The purpose of the review is to prepare for syngas separation by the selected process in terms of hydrogen recovery and purity using ITPE’s advanced technological facilities. The findings are expected to contribute to improving PSA-based hydrogen purification strategies, offering a pathway for enhanced industrial-scale hydrogen production. This work provides a foundation for bridging theoretical PSA principles with practical implementation, supporting the growing demand for clean hydrogen in sustainable energy systems.

This article is a broad literature review of materials used and defined as potential for heat storage processes. Both single-phase and phase-change materials were considered. An important part of this paper is the definition of the toxicity of heat storage materials and other factors that disqualify their use depending on the application. Based on the literature analysis, a methodology was developed for selecting the optimal heat storage material depending on the typical parameters of the process and the method of heat transfer and storage. Based on the presented results, a solution was proposed for three temperature ranges: 100 °C (low-temperature storage), 300 °C (medium-temperature storage) and 500 °C (high-temperature storage). For all defined temperature levels, it is possible to adapt solid, liquid or phase-change materials for heat storage. However, it is essential to consider the characteristics of the specific system and to assess the advantages and disadvantages of the accumulation material used. Rock materials are characterised by similar thermophysical parameters and relatively low prices compared with their universality, while liquid energy storage allows for greater flexibility in power generation while maintaining the operational parameters of the heat source.