Hydrogen (H₂) is a key energy carrier and industrial feedstock, with growing interest in its production from syngas and water–gas shift (WGS) syngas. Effective purification methods are essential to ensure high hydrogen purity for various applications, particularly fuel cells, chemical synthesis, or automotive fuel. Pressure swing adsorption (PSA) has emerged as a dominant separation technology due to its efficiency, scalability, and industrial maturity. This study reviews PSA-based hydrogen purification and proposes an experimental framework based on literature insights. Key process variables influencing PSA performance, such as adsorbent selection, cycle sequences, pressure conditions, and flow configurations, are identified. The proposed experimental methodology includes breakthrough adsorption studies and PSA process evaluations under dynamic conditions, with variations in column configuration, adsorption pressure (8–9 bar), and process concept (Berlin and Linde Gas). The purpose of the review is to prepare for syngas separation by the selected process in terms of hydrogen recovery and purity using ITPE’s advanced technological facilities. The findings are expected to contribute to improving PSA-based hydrogen purification strategies, offering a pathway for enhanced industrial-scale hydrogen production. This work provides a foundation for bridging theoretical PSA principles with practical implementation, supporting the growing demand for clean hydrogen in sustainable energy systems.

The transformation of the energy sector towards an increased share of renewable energy sources in the energy mix requires attention in the area of electricity storage. Renewable energy sources (photovoltaics or wind energy) are marked by the intermittency of electricity production and require the construction of energy storage to adapt the energy supply to the demand, providing greater stability. The authors focused on verifying the solution of gravitational energy storage in existing shafts of hard coal mines in Poland. The issue is significant for Poland, as a country with an extensive mining infrastructure, which is searching for new scientific and practical solutions to utilize disused mining shafts for new purposes. In the analysis, the focus was on one shaft located within the Upper Silesian Coal Basin (Górnośląskie Zagłębie Węglowe), maintained for the drainage of the neighboring deposit. The article presents the calculation of energy that can be stored and an analysis of the effectiveness of energy storage in the shaft. The basic assumption of the analysis was 1 cycle of work per day (charging and discharging) in order to use the effect of low prices at night and high prices during peak hours (according to Towarowa Giełda Energii (TGE) quotations). Although energy storage already functions around the world, the studied case is new, because it refers to the usage of existing shafts which makes it a non-investment case. The results of the study showed that the obtained economic effects of the analyzed solution are low, therefore there is no economic justification of activities related to its implementation, taking into account the current price conditions.

This paper analyses the impact of the method of grinding printed circuit boards (PCBs) in a knife mill on the efficiency and purity of products obtained during electrostatic separation. The separated metals and plastics and ceramics can be used as secondary raw materials. This is in line with the principle of circular economy. Three different screen perforations were used in the mill to obtain different sizes of ground grains. Moreover, the effect of cooling the feed to cryogenic temperature on the final products of separation was investigated. The level of contamination of the concentrate, intermediate, and waste obtained as a result of the application of fixed, determined electrostatic separation parameters was assessed using ICP-AES, SEM–EDS, XRD, and microscopic analysis as well as specific density. The yields of grain classes obtained from grinding in a knife mill were tested through sieve analysis and by using a particle size analyser. The test results indicate that using a knife mill with a 1 mm screen perforation along with cooling the feed to cryogenic temperature significantly improves the efficiency of the process. The grinding products were characterised by the highest release level of the useful substance—metals in the free state. The purity of the concentrate and waste obtained from electrostatic separation was satisfactory, and the content of the intermediate, in which conglomerates of solid metal–plastic connections were present, was very low. The yield of concentrate and waste amounted to 26.2% and 71.0%, respectively. Their purity, reflected in the content of the identified metals (valuable metals), was at the level of 93.3% and 0.5%, respectively. In order to achieve effective recovery of metals from PCBs by means of electrostatic separation, one should strive to obtain a feed composed of grains <1000 μm and, optimally, <800 μm.

This paper presents the process of virtual prototyping of bulk material preparation devices in mining using numerical simulations of multi-physics phenomena. The discrete element method (DEM), meshless method (MFree), and computational fluid dynamics (CFD) were used in the calculation process. The importance of the extraction process and the practical application of DEM in various industries are discussed. The main contact models between particles and how structural material wear is modelled in DEM are presented. The structure of the computational models in DEM and CFD environments is presented. For the validation of the bulk material computational model, bench tests were carried out to determine the material properties (aggregate: five grades, 0–16 mm; coal concentrate: five grades, 2–32 mm; and so-called raw coal, grade 2–8 mm). The bulk density and angle of natural repose were measured, along with determination of the internal and external friction coefficients. Simulations corresponding to the laboratory tests were carried out. Numerical calculations were carried out for the side chute (results—velocities of the particles, compressive forces in the particles, determination of the wearing process) and for the coke classification line (two lines were assessed according to different aggregate sizes and densities of the bulk material). These multi-physics calculations required a combination of DEM-MFree and DEM-CFD methods. Based on the obtained results, it was possible to evaluate the performance and efficiency of the assessed machines.

In Europe, renewable energy sources such as photovoltaic panels and wind power plants are developing dynamically. The growth of renewable energy is driven by rising energy prices, greenhouse gas emission restrictions, the European Union’s Green Deal policy, and decarbonization efforts. Photovoltaic farms generate energy intermittently, depending on weather conditions. Given the increasing number of new installations, ensuring the power balance and transmission capacity of the electrical grid has become a major challenge. To address this issue, the authors propose a technical solution that allows the energy generated by photovoltaic systems to be stored in the form of heat. Thermal energy from solar power and wind energy offers significant potential for energy storage. It can be accumulated during summer in specially designed sand-based heat storage systems and then used for heating purposes in winter. This approach not only reduces heating costs but also decreases greenhouse gas emissions and helps balance the power grid during sunny periods. Post-industrial areas, often located near city centers, are suitable locations for large-scale heat storage facilities supplying, among others, public utility buildings. Therefore, this article presents a concept for utilizing high-temperature sand-based heat storage systems built in decommissioned underground mining excavations.

The article presents a construction and operational principle of a pulsating jig, a device for obtaining minerals in a pulsating water medium. A smart control system of the device is discussed. Examples of jig implementations for obtaining minerals from natural deposits and for a recovery of minerals from mine heaps are presented. Tests results of used equipment are provided, indicating a possibility of obtaining purified aggregate and steam coal concentrate of high quality parameters.