The internal losses in the tip clearance region strongly influence the compressor performance and its operational range. Previous research proved that passive wall treatments with circumferential grooves in axial compressors effectively increase the compressor stall margin. The vortex generated inside the circumferential grooves creates a resistance to the flow that leaks into the tip clearance region of the compressor. However, most works found in the literature on circumferential grooves in axial compressors deal only with high-performance single-stage axial compressors. Therefore, there is a need to investigate and analyze the behavior of circumferential grooves in a multi-stage environment. In the present work, a passive wall treatment with circumferential grooves was implemented in a multi-stage axial compressor. Different configurations of circumferential grooves were created at the casing of the first and second rotor rows used in a four-stage axial flow compressor. Numerical simulations were performed to evaluate the influence of the circumferential grooves on the performance of a multi-stage axial compressor. The results obtained after the simulations for the different circumferential groove configurations were compared with the results obtained for the compressor without casing treatment (smooth wall) for different rotational speeds. Furthermore, the complete compressor map characteristics were simulated for the different casing treatment configurations, and the results were compared with the compressor characteristics of the smooth wall case. The passive wall treatment with circumferential grooves produced changes in the multi-stage axial compressor flow field, especially in the tip clearance region, improving the compressor stability mainly for part load speeds.
Adverse pressure gradients are intrinsic to compressor flow behavior and are further intensified by secondary effects associated with rotor tip clearance flow interactions. Tip clearance generates leakage flow, which leads to the formation of tip leakage vortices, a major contributor to aerodynamic losses in axial compressors. These vortices significantly influence both compressor performance and operational stability. Extensive prior research has demonstrated that passive casing treatments, particularly axial slots, can substantially improve the stall margin in axial compressors. In this work, the performance of a new casing treatment geometry is investigated using the concept of recirculating flow within semi-circular axial slots. The proposed casing treatment geometry builds upon recent experimental findings involving single-rotor configurations. It was applied to the first rotor row of a three-and-a-half-stage (3.5-stage) axial compressor comprising an inlet guide vane followed by three rotor–stator stages. The numerical model incorporates axial slots with a novel periodic interface approach implemented in a multistage compressor simulation. Three-dimensional steady-state RANS (Reynolds Average Navier-Stokes) simulations were performed to investigate the aerodynamic effects of the casing treatment across various rotational speeds. The results for the casing treatment configuration were compared with those of a baseline smooth casing. The introduction of the new casing treatment produced noticeable modifications to the internal flow structure, particularly in the tip region, resulting in improved overall compressor stability within the operating range of 85 to 100% of design speed.
The internal losses in the tip clearance region strongly influence the compressor performance and its operational range. Previous research proved that passive wall treatments with circumferential grooves in axial compressors effectively increase the compressor stall margin. The vortex generated inside the circumferential grooves create a resistance to the flow that leaks in the tip clearance region of the compressor. However, most works found in the literature on circumferential grooves in axial compressors deal only with high-performance single-stage axial compressors. Therefore, there is a need to investigate and analyze the behavior of circumferential grooves in a multi-stage environment. In the present work, a passive wall treatment with circumferential grooves was implemented in a multi-stage axial compressor. Different configurations of circumferential grooves were created at the casing of the first and second rotor rows used in a four-stage axial flow compressor. Numerical simulations were performed to evaluate the influence of the circumferential grooves on the performance of a multi-stage axial compressor. The results obtained after the simulations for the different circumferential groove configurations were compared with the results obtained for the compressor without casing treatment (smooth wall) for different rotational speeds. Furthermore, the complete compressor map characteristics were simulated for the different casing treatment configurations, and the results were compared with the compressor characteristics of the smooth wall case. The passive wall treatment with circumferential grooves produced changes in the multi-stage axial compressor flow field, especially in the tip clearance region, improving the compressor stability mainly for part load speeds.
Adverse pressure gradients are intrinsic to the flow behavior in compressors and are further ex-acerbated by secondary effects arising from rotor tip clearance flow interactions, a phenomenon common across various turbomachinery configurations, axial and radial. Tip clearance induces leakage flow, which leads to the formation of tip leakage vortices—a principal contributor to aerodynamic losses in axial compressors. These vortices exert a significant impact on both com-pressor performance and the operational stability range. Extensive prior research has demon-strated that passive casing treatments, particularly the implementation of axial slots, can sub-stantially enhance stall margin in axial compressors. The recirculating flow established within semi-circular axial slots acts to mitigate the strength of the tip leakage vortex by redirecting low-momentum leakage flow upstream of the rotor leading edge, thereby introducing a resistance mechanism that suppresses flow leakage through the clearance gap. Many existing studies on axial slot implementation focus predominantly on high-performance single-stage axial compressors. Consequently, there remains a gap in the literature regarding the application and performance implications of such treatments in multi-stage compressor systems. In the present study, a passive casing treatment employing axial slots was integrated into a multi-stage axial compressor. The slot geometry was selected based on recent experimental findings involving single-rotor configura-tions. The casing treatment was applied over the first rotor row in a three-and-a-half-stage (3.5-stage) axial compressor configuration, comprising an inlet guide vane (IGV) followed by three rotor-stator stages. Three-dimensional steady-state numerical simulations were conducted to investigate the aerodynamic effects of the axial slot treatment across various rotational speeds. The results obtained for the slotted configuration were compared against a baseline case featuring a smooth casing. The introduction of axial slots induced noticeable modifications to the internal flow structure, particularly in the tip region, leading to an improvement in overall compressor stability within the operating range between 85% to 100% of design speed. Stall margins improved 3.55% at design speed. Significant stall margin improvement occurred at 95% design speed with ΔSM of 11.24%. At 85% design speed, the efficiency starts to deteriorate and axial slots did not improve the stall margins with ΔSM of -1.03 %.
Film cooling is an important technique for the protection of axial turbine blades from high gas temperatures. An appropriate study is necessary in order to obtain a reliable representation of the flow characteristics involved in such phenomena. Because of the high computational cost of high-fidelity simulations, the low-fidelity simulation method Reynolds Averaged Navier Stokes
Numerical simulations were carried out with the purpose of investigating the effect of applying circumferential grooves at axial compressor casing passive wall treatment to enhance the stall margin and change the tip leakage flow. The tip leakage flow is pointed out as one of the main contributors to stall inception in axial compressors. Hence, it is of major importance to treat