This paper proposes a Field Programmable Gate Array (FPGA)-based control system to implement micro-light-emitting diode (micro-LED) real-time display. The control system includes the interface control, video processing, memory management, image data transmission, control signal generation and correction. Then, we implement the micro-LED real-time display via memory management. We propose the brightness correction to achieve high grey-scale and high uniformity display. The LEDs are mounted on the glass substrate prepared using low-temperature polysilicon (LTPS) technology, and then we find the 24 × 46 pixels micro-LED panel. And the control system has been successfully applied to the panel of glass-based micro-LED displays. A new grey control method is proposed in this work, which can effectively improve the refresh rate of the micro-LED displays. The high grey-scale refresh rate is 2100 Hz, and the low grey-scale refresh rate is 300 Hz. The uniformity of the panel is increased to 85% after brightness correction.
The increase in pixel density exacerbates the process difficulty and manufacturing cost of flat panel displays, especially for Micro-LED displays. To alleviate this problem, this paper proposes a novel single-image subpixel rendering method using a residual network for RGBG square-arranged flat panel subpixel displays. The proposed method uses a residual network to achieve nonlinear mapping from the original image to the rendered image and designs a perceptual error loss function based on the contrast sensitivity function (CSF) of the human eye to find an optimal balance between luminance resolution and chromatic aliasing. The experimental results show that the proposed method has significant advantages in rendering subpixel images, effectively controlling color errors while maintaining image clarity. Compared with existing subpixel rendering algorithms, the proposed method outperforms several evaluation metrics, including the zoomed peak-signal-to-noise-ratio (PSNRz) and perceptual error measuring (PEM), demonstrating its significant potential to improve visual quality.
This paper presents the design of a 40 × 40 micro-light-emitting (micro-LED) test array based on a 20 mm × 20 mm substrate. A study of the relationship between luminous brightness, driving current, and driving voltage revealed that the data voltages of the red, green, and blue micro-LED array from 0 to 255 grey levels are 0.31 V, 0.29 V, and 0.30 V, respectively, under the condition that the target brightness of the white field is 1000 nits and the color temperature is 9300 K. The brightness range of the red micro-LED array is 64.8–101.2%, the brightness range of the green micro-LED array is 66.5–102.8%, and the brightness range of the blue micro-LED array is 53.5–129.2%. In order to overcome the luminance nonuniformity, a grey level depth of 12 -bit is required. A 10T3C pixel driver circuit based on low-temperature polysilicon (LTPS) with a depth of 12 bits greyscale is designed and fabricated into the micro-LED display. A brightness uniformity of 84.1–97.1% can be achieved by brightness correction combined with a 12-bit greyscale depth system for micro-LED display. This provides a valuable reference point for subsequent improvements in the quality of micro-LED displays.
This paper presents a comprehensive investigation into the phenomenon of gamut boundary distortion that occurs during the gamut conversion process in LED full-color display systems. This phenomenon is influenced by the electro-optical transfer function. First, a CIE-xyY colorimetric framework specifically designed for LEDs is developed and established as the foundation for gamut conversion in LED applications. Next, the principles of gamut conversion based on this model are detailed. Additionally, a set of indices, including the Laplacian operator, entropy function, and magnitude of deviation of distorted color points, is integrated to form a comprehensive descriptive methodology. This methodology enables a thorough quantification of distribution patterns and effectively illustrates the outcomes of distortion. The findings of this research are significant for improving color conversion strategies and enhancing the color performance of display devices, making meaningful contributions to related fields.
Ideally, the Perceptual Quantizer (PQ) for High Dynamic Range (HDR) image presentation requires a 12-bit depth to ensure accurate quantization. In most cases, mainstream displays employ a limited 10-bit PQ function for HDR image display, resulting in notable issues such as perceived contrast loss and the emergence of pseudo-contours in the image hierarchy, particularly in low-brightness scenes. To address this issue, this paper proposes a novel luminance mapping relationship while preserving a 10-bit depth. Unlike conventional methods that derive PQ using a fixed Just Noticeable Difference (JND) fraction, this approach incorporates an adaptive adjustment factor. By adjusting the JND fraction according to brightness levels, this method effectively optimizes the quantization interval, improves reproducible contrast, and ensures uniform perception. The results demonstrate that the proposed approach effectively reduces the perception of contrast loss in low-brightness scenes, eliminates potential artifacts, and enhances the presentation quality of the display system.