Stuart Gregson

Prof. Stuart Gregson

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 June 2022 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
SGStuart Gregson
Stuart Gregson
ZQZhijin Qin
Zhijin Qin
CPClive G. Parini
Clive G. Parini
Compressive sensing (CS) has been deployed in a variety of fields including wideband spectrum sensing, active user detection, and antenna arrays. In massive multiple input multiple output (MIMO) arrays, CS has been applied to reduce the number of measurements required to verify the arrays excitation. To date, the literature has concentrated on the various methods of achieving CS and applying them to both linear and 2-D arrays, and aimed at detecting fully failed elements in an array, offering simple pass/fail testing. All follow the general approach of creating the sparsity needed for CS by subtracting the measured far field or near field of the test array from that of a “gold standard” array measured under exactly identical conditions. This article extended this work to the need for rapid but accurate reconstruction of element excitation in a production testing environment for massive MIMO arrays. The aim is to demonstrate that CS can offer accurate reconstruction of array excitation. Particularly, the work addresses the issues of optimal sampling, measurement noise, accuracy of faulty element detection, effects of beam scanning, and physical alignment of the gold standard array with the test array. We have restricted ourselves to considering production standard arrays with failure rates up to around 5% and conclude with a set of proposed modifications to the basic CS process as applied to array excitations that achieve a near 20 dB improvement in the accuracy of the reconstructed array excitation offering mean square errors (MSEs) near to −40 dB, with a sampling strategy of just 1.4% of the Nyquist rate. This is achieved with the number of measurements to array element size ratio of approximately 0.2.

24 October 2024 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
CPClive G. Parini
Clive G. Parini
SGStuart Gregson
Stuart Gregson
In massive MIMO arrays, Compressive Sensing (CS) has been proposed to rapidly verify the arrays excitation in a production environment. All follow the general approach of creating the sparsity needed for CS by subtracting the measured far-field or near-field of the test array from that of a ’gold standard’ array measured under identical conditions. In several previous papers the authors have applied CS to planar near-field (PNF) measurements with a view to building a compact test facility well suited to the production environment for these antennas. In this paper we identify a fundamental flaw in the creation of the difference pattern between a gold standard antenna and the test antenna, in that the electrical path length difference between probe and gold standard antenna and that of probe to test antenna must be no more than 0.002λ or 0.7°. Even if mechanical tolerance can achieve this, thermal drift in the radio-frequency (RF) subsystem will easily reach the 0.7° figure. The paper then describes an analysis process that overcomes this problem restoring the CS process to very nearly the levels of performance described in our previous publications and those of other workers. To achieve this, we have used a fixed set of near-field (NF) probes located randomly over a region confined to the central part of the NF measurement plane along with a PIN switch matrix to offer a very rapid and very consistent RF measurement. We have extensively simulated a massive MIMO array of 8x24 elements and found that just 25 NF probes can detect up to 2% failure rate. In addition, we present a technique to improve the accuracy of the array excitation reconstruction by using several partial excitations of the array. In this work we consider both array element amplitude and phase reconstruction performance and demonstrates that it is possible to detect a single element, phase only, fault of just 22.5°.

8 October 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
ZCZhong Chen
Zhong Chen
SGStuart Gregson
Stuart Gregson
Anechoic chambers used for Electromagnetic Compatibility (EMC) measurements above 1 GHz are qualified based on the Site Voltage Standing Wave Ratio (SVSWR) method as per the international standard CISPR 16-1-4. With one antenna at the fixed position some distance away from the quiet zone (QZ), the SVSWR is acquired by moving a dipole-like antenna along several linear paths that are located at the edge of the QZ. To reduce test burden, the SVSWR method under-samples the measurement by design, in that only 6 discrete points along each 40 cm linear travel path are measured. As a result, the test results are generally overly optimistic. In this paper, we propose to use a novel Cylindrical Mode Coefficient (CMC) based frequency domain mode filtering techniques to obtain the VSWR. Here, we measure the vector pattern cut of the dipole-like test antenna with an offset placement at the outer edge of QZ. The antenna is then mathematically translated to the rotation center, whereupon a band-pass filter that tightly encloses the test antenna mode spectrum is applied. Two approaches are studied herein for translating the rotation center. One is by applying a path length correction to both magnitude and phase, and the other is by performing a cylindrical far-field transformation on the quasi-far-field data. The difference between the mode filtered antenna pattern and the original perturbed pattern is used to derive the chamber SVSWR. In contrast to the conventional technique, the proposed, novel, method does not suffer from positional under-sampling, so it is well-placed to be applied at microwave frequencies and above.

21 February 2018 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
SGStuart Gregson
Stuart Gregson
CPClive G. Parini
Clive G. Parini
ANAllen C. Newell
Allen C. Newell
For more than a decade now, a measurement and post‐processing technique involving modal filtering, named mathematical absorber reflection suppression (MARS), has been used very successfully to identify and subsequently extract range reflections in spherical, cylindrical and planar near‐field antenna test systems and far‐field (FF) and compact antenna test ranges (CATRs). Much of the early work concentrated on verification through experimental testing; however, some additional validation was performed using computational electromagnetic (EM) simulations. These considered first FF and subsequently near‐field cases. The recent development of an accurate, flexible EM simulation tool that enables the simulation of ‘measured’ FF pattern data as obtained from using a CATR has, for the first time, permitted the careful verification of the FF‐MARS technique for a specified antenna under test (AUT) and CATR combination. This study presents simulated ‘measured’ FF antenna pattern data in the presence of a large scatterer and then verifies the successful extraction of the scattering artefacts. In addition to considering range reflections, feed spill‐over is also treated. Results are presented and discussed.

5 September 2025 in Sensors
Verified
Journal Article
Open access
PDF file
MDMarc Dirix
Marc Dirix
SGStuart Gregson
Stuart Gregson
RDRostylsav Dubrovka
Rostylsav Dubrovka
Monochromatic mode-filtering-based scattering suppression techniques have been shown to be applicable to all commonly used forms of far- and near-field antenna and RCS measurement techniques. Traditionally, the frequency-domain mode-filtering technique takes a far-field pattern, either measured directly or obtained using a suitable near-field to far-field transformation, as its starting point. The measurement is required to be conducted such that the antenna under test (AUT) is positioned offset from the origin of the measurement coordinate system. This physical offset introduces a phase taper across the AUT pattern and results in far greater interference occurring between the direct and indirect parasitically coupled spurious scattered signals. The method is very general and can be applied to all forms of near- or far-field measurements. However, for the case of a spherical near-field measurement (SNF) approach, it is somewhat cumbersome and tedious as first we must perform a probe-corrected spherical near-field to far-field transformation, which itself involves the computation of a complete set of spherical mode coefficients, and then after the displacement has been applied to the far-electric-fields, a second spherical wave expansion and summation is required to implement the mode-filtering procedure. While this data processing chain has been widely deployed and exhaustively validated, it requires passing through the asymptotic far-field, which inevitably results in additional computational effort, as well as incurring some loss of information, which can impose limitations on further near-field applications. This paper introduces an alternative, novel, rigorous algorithm that applies the displacement of the AUT directly using the vector addition theorem for spherical waves. An efficient implementation has been developed, and it is shown that the new, rigorous algorithm for the translation and filtering can be easily implemented directly within the data processing chain of any standard spherical near-field transformation algorithm, avoiding the need to first transform to the asymptotic far-field and also removing the need for a secondary spherical mode expansion and secondary spherical mode summation. While the vector addition theorem required for the spherical near-field to far-field transformation (SNFFFT) algorithm has been described in detail in the open literature, its implementation has been limited to the case of impinging waves and positive z-directed translations where the magnitude of the displacement is necessarily larger than the minimum sphere radius (MRE). In the current paper, the addition theorem will be derived in a new form that allows the translation to be applied in any desired direction, without the need for additional rotations, as well as being valid for solutions for waves transitioning through the sphere and applicable for the case where the magnitude of the translation is smaller or larger than the radius of the minimum sphere.

10 February 2025 in International Journal of Microwave and Wireless Technologies
Verified
Journal Article
Open access
PDF file
SGStuart Gregson
Stuart Gregson
CPC.G. Parini
C.G. Parini
DLD. Lewis
D. Lewis
WCW. Cooper
W. Cooper
This invited, extended, paper compares and contrasts a number of different near-field (NF) to far-field (FF) transformation algorithms that can be used for the purpose of processing NF data acquired using multi-axis industrial robots. The merits and limitations of these various, commonly encountered algorithms are highlighted with comparison FF data presented across a frequency range spanning 3–15 GHz. Crucially, the paper explores the viability of using mixed mode acquisition geometries when performing antenna gain measurements where, prior to this work, several of the transforms yielded different transform gains, and electrical lengths. Here, we verify that at 8 GHz and above, where truncation effects were minimal, for a circa 30 dBi gain (at 8 GHz) test antenna the FF peaks were in agreement to better than ±0.02 dB, at 3σ irrespective of the acquisition geometry and transform algorithm used. In this invited, extended work, the existing simulation results are augmented with experimental results obtained from planar and spherical NF measurements of a pyramidal horn taken using a dual robotic antenna measurement system and a consistent distributed RF subsystem.