Recent economic conditions and technological developments in manufacturing methods have necessitated the use of advanced engineering design and analysis methods, such as topology optimization to increase efficiency and reduce costs in structural designs in the shipbuilding industry, as in many manufacturing sectors. Finite element method-based topology optimization aims to optimize a lightweight design without compromising the desired strength in ship structural designs, thus increasing efficiency in postmanufacturing functionality. Thus, it helps to create innovative products that can meet the sustainable design and manufacturing needs in the shipbuilding industry. In this study, the design of a foldable hatch cover for a feeder container ship was improved using topology optimization. Based on the premise geometry obtained by topology optimization, the model design was updated and an optimum design with the desired strength at minimum mass was obtained through iterative analyses. The optimization study resulted in a weight reduction of 2.49 tons and a material cost saving of $3.635 for a hatch cover. Thus, a total saving of $50.890 is expected from raw materials, labor, and consumables for 14 hatch covers on a sample ship. In addition, due to reduced draft and consequently lower drag, a 6-kW reduction in main engine power will result in approximately 6.6 tons less annual fuel consumption. Furthermore, an 8-mm vertical reduction in the ship's center of gravity increases stability by approximately 0.6% according to International Maritime Organization (IMO) stability criteria.
21 December 2025 in International Journal of Mechanics and Materials in Design
Bu çalışma, ticari gemi inşasında kullanılan dolu döşek elemanlarının topoloji optimizasyonu yoluyla yapısal ağırlıklarının azaltılmasını amaçlamaktadır. Gemilerde yaygın olarak kullanılan çelik levhalar, çeşitli açıklıklar eklenerek hafifletilmektedir. Ancak mevcut açıklık tasarımlarının çoğu deneyime dayalı olup, yapısal verimlilik açısından optimizasyona açıktır. Bu araştırmada, enine sistemli bir geminin çift dip yapısındaki dolu döşek elemanları için farklı genişlik (1,8–4,2 m) ve kalınlıklarda (10–40 mm) standart dışı açıklık tasarımları önerilmiştir. Autodesk Fusion 360 yazılımının şekil optimizasyonu modülü kullanılarak, yüksekliği 1200 mm olan levha modellerine bölgesel dip yükleri uygulanmıştır. Tüm analizlerde yapısal ağırlığın %50 azaltılması hedeflenmiştir. Optimizasyon sonuçları, her genişlik ve kalınlık için optimum açıklık sayısını ve geometrik düzenleri belirlemiştir. Ayrıca, optimize edilen tasarımlar statik gerilim analizleri ile değerlendirilmiş, maksimum gerilme bölgeleri ve büyüklükleri analiz edilmiştir. Sonuçlar, döşek genişliğinin artışıyla açıklık sayısının arttığını, kalınlığın artışıyla ise açıklık kenarlarında daha geniş köşe yarıçaplarının oluştuğunu göstermiştir. Tüm optimize edilmiş modellerde, maksimum gerilme değerleri izin verilen 150 MPa sınırının altında kalmıştır. Özellikle 3,6 m genişlik, 20 mm kalınlık ve %50 malzeme korunumuna sahip modelin en uygun çözümü sunduğu belirlenmiştir. Bu çalışma, gemi çift dip yapılarında dolu döşeklerin topoloji optimizasyonu ile hafifletilmesine yönelik önemli bulgular sunmaktadır.
30 April 2025 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Purpose. Substantiation of the mechanism of damage formation on the rolling surface of railway wheels by different strength levels to determine optimal structural state of the carbon steel. Methodology. The material for study was steel from rim fragments of the railway wheels with a carbon concentration of 0.61 and 0.69 % and other chemical elements within the range of the grade composition. Samples for mechanical tests were subjected to thermal hardening to obtain different structural states. The microstructure was examined under light and electron microscopes, using quantitative metallography techniques. Metal wear was determined under dry friction conditions, with different degrees of slippage, on a machine of the SMC-2 type. Hardness was estimated by the Rockwell method, and micro hardness of structural components – on a PMT-3 micro hardness tester. Findings. Based on the analysis of the wheel-rail interaction, it was determined that resulting inhomogeneity at distribution of plastic deformation and heating temperature in the plane of the contact surface are due to the development of slippage processes. Heating the metal to temperatures higher than onset of phase transformations and subsequent accelerated cooling determine the mechanism of structural transformations. The difference between adjacent sections of the rolling surface with different structural states and corresponding level of strength determines conditions for the formation of a fracture center of the railway wheel during operation. Originality. Heating the metal to temperatures above onset of phase transformations from the wheel sliding along rail and subsequent forced cooling is the cause of formation of gradient of the structures from pearlite to martensitic-bainite. The cyclic nature of the change in the structural state of the metal from simultaneous influence elevated temperatures, high plastic deformations and phase transformations corresponds to the development of low-cycle fatigue processes. Plastic deformation of the rolling surface area with martensitic or bainite structures is accompanied by softening, and with pearlite structures – by a hardening process. Practical value. The obtained results of the development of phase transformations in carbon steel on rolling surface will be useful in determining optimal structural state of the railway wheels of different strength levels.