This study models and investigates the effects of foam structure and thermal load on the thermomechanical vibration behavior of functionally graded (FGM) piezoelectric plates made of PZT-5H and BaTiO3. The Navier technique is used to solve the equation of motion of the plates, which is derived from Hamilton's principle and higher-order shear theory. The FGM plate is made of BaTiO3 on the bottom and PZT-5H solid/foam material on the top, and the study investigates four different foam models: uniform, symmetric, bottom, and top foam. In addition to temperature loading and applied external electric current, the study looked at how different material grading indices and foam topologies affected the smart plate's vibration buckling behavior. PZT-5H is the material with the highest thermal vibration buckling resistance of the solid smart plate, whereas the Symmetric Foam structure has the highest thermal resistance and the Uniform Foam structure has the lowest. In addition to the thermal load, the applied external electric potential causes a softening effect due to electro-elastic behavior, and the foam structure has been shown to improve the thermal vibration behavior of the smart FGM plate. It was also discovered that the usage of BaTiO3 and PZT-5H, as well as the foam structure, improved the electro-elastic behavior of the smart FGM plate.
5 December 2025 in Journal of Vibration Engineering & Technologies
In this study, polylactic acid (PLA)-hemp composite samples were fabricated using a layer-paused fused filament fabrication (FFF) method, in which natural hemp fibers were manually inserted into pre-designed internal channels generated via computer-aided design (CAD). The novelty of this work lies in the introduction of a simple yet effective manufacturing approach that enables the direct integration of continuous natural fibers into the FFF process without requiring filament modification. This approach allows controlled fiber alignment and improved structural performance while maintaining the accessibility and sustainability of the FFF technique. Mechanical testing revealed that hemp fiber reinforcement increased the maximum tensile force from 1545 N to 1999 N (30%), while the displacement at maximum force decreased from 7.8 mm to 7.2 mm (8.7%), indicating a moderate reduction in ductility. Scanning electron microscopy (SEM) further confirmed the presence of fiber pull-out and interfacial separation as dominant fracture mechanisms. These results highlight the potential of the proposed method for advancing sustainable natural fiber-reinforced composites produced via additive manufacturing.