As a direct energy converter between heat and electricity, thermoelectric generators (TEGs) have potential applications including recovery of waste heat, and solar thermoelectric power generation. Geometric parameter and material are two critical factors to improve the TEG performance. However, the strategies base on structure design and material development are always separated. There are limited studies on the effects of consolidating them simultaneously. Here, an idea of segmented material coupled with irregularly variable cross-section design was conceived to further improve the TEG output power. The performance of TEGs with rectangular leg, segmented leg, variable cross-sectional leg, and the new design are compared. The coupling effects between various mechanisms are revealed, which are responsible for the superior performance provided by the developed design. Based on this knowledge, a multiparameters optimization was performed through the genetic algorithm to reach the optimal combination of design parameters. The results show that, with a constraint of certain material volume, the optimal performance of the TEG can be further enhanced by coupling segmented material and irregularly variable cross-section design. An improvement of 51.71% was achieved when compared with the conventional counterpart. This work offers a simple route to enhance the TEG performance when the device materials are specified, without an increase in the cost of manufacturing.

Zinc–bromine redox flow battery (ZBFB) is one of the most promising candidates for large-scale energy storage due to its high energy density, low cost, and long cycle life. However, numerical simulation studies on ZBFB are limited. The effects of operational parameters on battery performance and battery design strategy remain unclear. Herein, a 2D transient model of ZBFB is developed to reveal the effects of electrolyte flow rate, electrode thickness, and electrode porosity on battery performance. The results show that higher positive electrolyte flow rates can improve battery performance; however, increasing electrode thickness or porosity causes a larger overpotential, thus deteriorating battery performance. On the basis of these findings, a genetic algorithm was performed to optimize the batter performance considering all the operational parameters. It is found that the battery energy efficiency can reach 79.42% at a current density of $20{\mathrm{mA}\mathrm{cm}}^{-2}$. This work is helpful to understand the energy storage characteristics and high-performance design of ZBFB operating at various conditions.

Quantum coherence is a crucial resource in numerous quantum processing tasks. The robustness of coherence provides an operational measure of quantum coherence, which can be calculated for various states using semidefinite programming. However, this method depends on convex optimization and can be time-intensive, especially as the dimensionality of the space increases. In this study, we employ machine learning techniques to quantify quantum coherence, focusing on the robustness of coherence. By leveraging artificial neural networks, we developed and trained models for systems with different dimensionalities. Testing on data samples shows that our approach substantially reduces computation time while maintaining strong generalizability.

With the increasing application of CHP and an industry transition to distributed energy, it is necessary to make a comprehensive economic analysis and comparison of the entire lifetime of CHP from the net present value (NPV), payback period, and cost-saving ratio (CSR). Five systems, including micro-CHP, gas boiler (GB), air-source heat pump (ASHP), domestic gas-fired heater and domestic electric hot water-heater, are simulated. First, this paper takes annual heat use efficiency (AHUE) into account to compare the economy of each domestic hot water (DHW) system. The results show that a domestic gas-fired heater system is the most economical option in the AHUE of 31.28%. The economic influence of CHP and gas-fired heater under different AHUE are then analyzed. The results show that the DHW system based on CHP is the best when the AHUE is more than 55.35%. Finally, three different operation strategies of CHP are considered in this paper. From the perspective of annual energy cost and payback, the internal combustion-based CHP with thermal energy system (TES) is superior to the other two strategies being studied. Considering the optimal economic benefits, the CSR of the three different operation strategies is 41.3%, 69.69% and 69.77%, respectively.