In general, magnetic nanoparticles are not often used in dental applications due to some limitations of these materials, such as aggregation problems and low mechanical and chemical resistance but also esthetic problems due to their black color. Our research presents the synthesis of novel magnetic dental composite materials based on magnetic nanoparticles, functionalized and properly coated to overcome the limitations of using magnetic nanoparticles in dental applications. The composites were prepared using a preparation flow containing several integrated reaction steps used previously sequentially. An adequate and deep characterization of dental magnetic composites has been carried out in order to demonstrate that each limitation has been successfully overcome. It was proved that each component brings particular benefits in dental interventions: Fe₃O₄ nanoparticles have biocompatible, non-toxic properties and also antimicrobial effects; the SiO₂ layer significantly increases the mechanical strength of the material; and the Ca(OH)₂ layer initiates local calcification and significantly improves the color of the dental composite material. Due to magnetic properties, an innovative application approach on the tooth surface can be achieved under an external magnetic field, which, compared to conventional methods, has a major impact on reducing the occurrence of dental caries under filling materials as well as on reducing microfractures.

In this study, an innovative dental functionalized magnetic nanomaterial was developed by incorporating hydrophilic magnetic clusters as an alternative to conventional isolated magnetic nanoparticles, introducing a novel structural and functional concept in dental applications. The ~100 nm magnetic clusters—composed of densely packed 7 nm Fe₃O₄ nanoparticles—were sequentially coated with a silica (SiO₂) layer (3–5 nm) to improve chemical and mechanical stability, followed by an outer calcium hydroxide [Ca(OH)₂] layer to enhance bioactivity and optical integration. This bilayer architecture enables magnetic field-assisted positioning and improved dispersion within dental resin matrices. Silver nanoparticles were incorporated to enhance antimicrobial activity and reduce biofilm formation. The synthesis process was environmentally friendly and scalable. Comprehensive physicochemical characterization confirmed the material’s functional performance. Saturation magnetization decreased progressively with surface functionalization, from 62 to 14 emu/g, while the zeta potential became increasingly negative (from −2.42 to −22.5 mV), supporting its ability to promote apatite nucleation. The thermal conductivity (0.527 W/m·K) closely matched that of human dentin (0.44 W/m·K), and the colorimetric analysis showed improved brightness (ΔL = 5.3) and good color compatibility (ΔE = 11.76). These results indicate that the functionalized magnetic nanomaterial meets essential criteria for restorative use and holds strong potential for future clinical applications.

Flexible electrode materials with tailored electrical and mechanical properties are essential for reliable electrocardiographic (ECG) sensing. In this work, p-toluenesulfonic-acid-doped polypyrrole (PPy–TSA) films were modified using polymeric and inorganic fillers, as well as their combinations (polyethylene glycol, graphene, carbon nanotubes, and zeolite), to tune their functional performance. The reference PPy–TSA film exhibits typical morphological and chemical characteristics of doped polypyrrole and serves as a reliable baseline for comparison. All composite films retain electrical conductivity within the range required for ECG applications while showing improved mechanical compliance (i.e., enhanced ability to conform to the skin and sustain deformation). Based on the optimized balance between electrical and mechanical properties, flexible ECG electrodes were fabricated using the TSA-doped PPy-based composite film. ECG recordings obtained with the several proposed electrodes show good agreement with those acquired using a commercial ECG electrode, demonstrating the potential of PPy-based composite films for flexible bioelectronic sensing applications.

Flexible electrode materials with tailored electrical and mechanical properties are essential for reliable electrocardiographic (ECG) sensing. In this work, p-toluenesulfonic-acid-doped polypyrrole (PPy–TSA) films were modified using polymeric and inorganic fillers, as well as their combinations (polyethylene glycol, graphene, carbon nanotubes, and zeolite), to tune their functional performance. The reference PPy–TSA film exhibits typical morphological and chemical characteristics of doped polypyrrole and serves as a reliable baseline for comparison. All composite films retain electrical conductivity within the range required for ECG applications while showing improved mechanical compliance. Based on the optimized balance between electrical and mechanical properties, flexible ECG electrod were fabricated using the TSA doped PPy based composite film. ECG recordings obtained with the several proposed electrodes show good agreement with those acquired using a commercial ECG electrode, demonstrating the potential of PPy-based composite films for flexible bioelectronic sensing applications.