The mechanical properties, phase composition and luminescence of (ZrO2)1−x(Sm2O3)x (x = 0.02–0.06) crystals synthesized using directional melt crystallization were studied. The regularities of changes in the phase composition of the crystals depending on samaria concentration were analyzed. Optical spectroscopy showed that Sm ions were incorporated into the ZrO2 crystal lattice in the form of Sm3+. The microhardness of the crystals was shown to increase with Sm2O3 concentration and reached 12.45 GPa for (ZrO2)0.94(Sm2O3)0.06 crystals. The highest fracture toughness of 14.2 MPa∙m1/2 was observed for the crystals containing 3.7 mol.% Sm2O3. The experimental results were analyzed in order to understand the effect of phase composition on the mechanical properties of the crystals. The effect of ionic radii of stabilizing oxide cations (i.e., Y3+, Gd3+ and Sm3+) on the mechanical properties of the materials on the basis of partially stabilized zirconia was also discussed.
The effect of ceria doping of (ZrO2)1−x(Sm2O3)x crystals on their phase composition, microhardness and fracture toughness was studied. The (ZrO2)0.995−x(Sm2O3)x(CeO2)0.005 crystals (where x = 0.032, 0.037 and 0.04) were grown using directional melt crystallization in a cold crucible. The mechanical properties, such as microhardness and fracture toughness, were explored using Vickers indentation. It was shown that the (ZrO2)0.995−x(Sm2O3)x(CeO2)0.005 solid-solution crystals contained both Ce4+ and Ce3+ ions. Phase analysis data suggested that CeO2 doping increased the tetragonality degree of the transformable t phase and reduced the tetragonality degree of the non-transformable t’ phase as compared to the (ZrO2)1−x(Sm2O3)x crystals. As a result, the t→m phase transition triggered by the indentation-induced stress in the CeO2-doped crystals was more intense and covered greater regions. CeO2 doping of the solid solutions increased the fracture toughness of all the crystals studied, whereas the microhardness of the crystals changed only slightly. CeO2 doping of the (ZrO2)1−x(Sm2O3)x solid solutions in the experimental concentration range did not improve the high-temperature phase stability of the crystals and did not prevent high-temperature degradation of their fracture toughness.
In this work, we studied the phase composition, local structure and mechanical characteristics of ZrO2 crystals partially stabilized with Y2O3 and co-doped with Nd2O3, CeO2, Er2O3, Tb2O3 and Yb2O3. Crystals were grown by directional melt crystallization in a cold container. The phase composition and structure of crystals were studied by X-ray diffractometry and transmission electron microscopy. The study of the features of the incorporation of rare-earth cations with different ionic radii into the transformable (t) and nontransformable (t’) tetragonal phases was carried out by the method of selective laser spectroscopy and time-resolved spectroscopy. Mechanical characteristics such as microhardness and fracture toughness were studied by the indentation method. It is shown that the phase composition and structure of crystals at the same total concentration of doping oxides depends on the degree of substitution of Y3+ cations by rare-earth cations. Rare earth ions of the beginning of the lanthanide series predominantly occupy positions in the nontransformable tetragonal phase of crystals based on zirconium dioxide. Ions of the end of a series of lanthanides do not show selectivity when entering the transformable (t) phase and nontransformable (t’) phase. The study of the mechanical characteristics of the crystals showed that the values of fracture toughness increase with an increase in the ionic radius of the rare earth element of the co-doped oxide, while the values of the microhardness of the crystals slightly decrease.
The phase composition, density, microhardness and fracture toughness of (ZrO2)1-x(R2O3)х crystals (where R = Y, Sm and Gd) for x = 0.02–0.04 have been compared. The crystals have been grown using directional melt crystallization in a cold crucible. The phase composition of the crystals has been studied using X-ray diffraction and Raman spectroscopy. The microhardness and fracture toughness of the crystals have been evaluated by means of indentation. At stabilizing oxide concentrations of ≥ 2.8 mol.% for Y2O3 and Gd2O3 and ≥ 3.7 mol.% for Sm2O3 the crystals have densities close to the theoretical ones and contain two tetragonal phases. At lower stabilizing oxide concentrations the crystals contain the monoclinic phase. The fracture toughness of the tetragonal crystals increases with the ionic radius of the stabilizer. The highest fracture toughness values achieved when stabilized by a specific oxide are 11.0, 13.0 and 14.3 MPa·m1/2 for the 2.8YSZ, 2.8GdSZ and 3.7SmSZ crystals, respectively. The fracture toughness proves to depend on the crystallographic orientation of the crystals. The results of this work can be used in the design and fabrication of various structural components and devices.
A series of high optical-quality crystals with the general formula (Sr1-yBay)0.95Er0.05F2.05 was grown using the Bridgman technique in a fluorinating atmosphere (CF4) using a graphite crucible and a resistive graphite heater. Using Energy Dispersive X-Ray and the Galliver-Pfann approximation, we were able to determine the distribution of the Er3+ dopant along the crystal length and the actual compositions of all samples. The composition (Sr0.28Ba0.67Er0.05F2.05) was found to lie in the saddle point region of the SrF2 – BaF2 – ErF3 phase diagram. The lattice parameters, hydrostatic density, microhardness, refractive indices at three wavelengths (633 nm, 969 nm, and 1539 nm), A and B coefficients in the two-terminal Sellmeier equation and absorption cross-section for transitions at wavelengths of 378, 522, 540, 650, and 1506 nm were determined. The results revealed a consistent change in properties with increasing barium fluoride mole fraction.