Amri Abdulah

Mr. Amri Abdulah

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 August 2024 in Fire
Verified
Journal Article
Open access
PDF file
KKKhoirudin Khoirudin
Khoirudin Khoirudin
BKBudi Kristiawan
Budi Kristiawan
SSSukarman Sukarman
Sukarman Sukarman
AAAmri Abdulah
Amri Abdulah
BSBudi Santoso
Budi Santoso
Muhammad AzizMuhammad Aziz
Muhammad Aziz
Transformers are crucial equipment in electrical distribution systems but have a significant potential for failure. Insulation materials, including transformer oil (TO), play a primary role in transformer failures. A fire involving the TO can lead to a large explosion, causing the main tank to rupture and resulting in extensive damage to the entire transformer and the surrounding area. Mineral oil (MO) is the most widely used type due to its availability and relatively low cost compared to other types of oil. However, MO has a critical disadvantage, which is its very low flash point. The low flash point makes MO highly flammable. When the oil fires in an enclosed space, such as a transformer tank, the pressure inside the tank increases, leading to a large explosion. Therefore, research on increasing the flash point of MO is highly necessary. The application of nanotechnology is a promising approach to increasing the flash point of base fluids. Research on the effect of nanoparticles (NPs) on flash points is very limited in the literature; thus, there is significant potential for further research in this field. The majority of studies indicate an increase in flash points with the addition of NPs to MO. There is only one study that shows a decrease in flash point, which is −1.33% compared to MO. From all the reviewed studies, it can be concluded that NPs are a potential solution to increase the flash point of MO. Despite their benefits, NPs require a thorough examination of health and environmental impacts, along with proper waste management, to ensure their advantages.

4 February 2026 in Results in Engineering
Verified
Journal Article
Open access
AAAmri Abdulah
Amri Abdulah
BKBudi Kristiawan
Budi Kristiawan
WJWibawa Endra Juwana
Wibawa Endra Juwana
SUSukarman
Sukarman
KHKhoirudin
Khoirudin

18 February 2026 in Journal of Engineering Research
Verified
Journal Article
Open access
SUSukarman
Sukarman
BKBudi Kristiawan
Budi Kristiawan
EBEko Prasetya Budiana
Eko Prasetya Budiana
KHKhoirudin
Khoirudin
AAAmri Abdulah
Amri Abdulah

20 March 2025 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Verified
Journal Article
Open access
PDF file
SSSukarman Sukarman
Sukarman Sukarman
BKBudi Kristiawan
Budi Kristiawan
EBEko Prasetya Budiana
Eko Prasetya Budiana
KKKhoirudin Khoirudin
Khoirudin Khoirudin
AAAmri Abdulah
Amri Abdulah
This study explores thermal conductivity enhancement in nanofluids for high-temperature applications (70–120°C), specifically targeting plastic injection molding. The research investigates two formulations: TiO2-3%/MEG-40 nanofluid, containing 3 vol% TiO2 nanoparticles, and TiO2-3%F8/MEG-40 binary nanofluid, comprising TiO2 rutile and SiO2 beta-quartz composite nanoparticles in a 92:8 ratio with a total volume fraction of 3 vol%. Both nanofluids were synthesized using the two-step method, with grain size confirmed via scanning and transmission electron microscopy. Thermal conductivity was measured using a TEMPOS Thermal Property Analyzer in a highly insulated heating chamber. Results demonstrated significant enhancements in comparison to the base fluid, with TiO2-3%/MEG-40 nanofluid and TiO2-3%F8/MEG-40 binary nanofluid exhibiting an 18% and 22% increase in thermal conductivity at approximately 95°C. Including SiO2 beta-quartz nanoparticles enhanced dispersion, and thermal conductivity, highlighting their critical role in optimizing performance. These findings demonstrate the potential of TiO2 rutile and SiO2 beta-quartz nanofluids to improve thermal management in industrial processes, advancing beyond existing literature by integrating nanoparticle stability with higher temperature thermal performance.

10 March 2025 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Verified
Journal Article
Open access
PDF file
AAAmri Abdulah
Amri Abdulah
BKBudi Kristiawan
Budi Kristiawan
WJWibawa Endra Juwana
Wibawa Endra Juwana
SSSukarman Sukarman
Sukarman Sukarman
KKKhoirudin Khoirudin
Khoirudin Khoirudin
This study aims to analyze the thermohydraulic performance of an aluminum mini-channel cold plate (MCCP) using Al₂O₃+EG/W nanofluids at various Reynolds numbers. The investigation focuses on the impact of Reynolds numbers, ranging from 953 to 1588 in laminar flow, on heat transfer enhancement and surface temperature reduction. The results clearly correlate higher Reynolds numbers and lower surface temperatures. The greatest wall temperature reduction of 12.53% was achieved using nanofluid at a Reynolds number of 1588. Heat transfer rates also increased with Reynolds numbers, from 45.93 W at Re = 953 to 67.60 W at Re = 1588. Furthermore, the pressure drop rose with increasing Reynolds numbers, recorded at 33 kPa, 40 kPa, and 51 kPa for Reynolds numbers 953, 1270, and 1588, respectively. The MCCP design in this study was specifically adapted for an electric vehicle battery with a capacity of 3.2 V and 80 Ah (dimensions: 200 mm x 130 mm), making these findings particularly relevant for battery cooling systems, especially in laminar flow applications using nanofluids.

31 January 2024 in Jurnal Asiimetrik: Jurnal Ilmiah Rekayasa & Inovasi
Verified
Journal Article
Open access
PDF file
AAAmri Abdulah
Amri Abdulah
DRDede Ardi Rajab
Dede Ardi Rajab
INIman Nurshahid
Iman Nurshahid
SUSukarman
Sukarman
KHKhoirudin
Khoirudin
MUMuhamad Taufik Ulhakim
Muhamad Taufik Ulhakim
The presence of electric vehicles (EVs) must be supported by batteries that have good-quality energy storage. Battery power is critical to the development of electric cars. Temperature affects battery strength, so operating within the optimum temperature range must be ensured. During the charge and discharge processes, the electrochemical reaction generates hot energy, causing an increase in battery temperature. In this research, the solution to the problem is to make a cooling system with a mini channel cold plate and Al2O3 1%vol+EG/W (50:50) nano coolant. Optimization of heat transfer enhancement using Response Surface Methodology-Central Composite Design (RSM-CCD) and experimental tests with various flow rate variations. The research findings revealed that the RSM-CCD results and the outcomes of studies employing test equipment agreed that the highest cooling fluid flow rate was the most optimal condition, the highest T2 temperature drop of 17.63% occurred at a flow rate of 1.7 LPM, and the lowest T2 temperature was 13.13% at a flow rate of 1 LPM.