Vicarious calibration, as one on-orbit calibration method, is a supplement to onboard calibration of sensors. The application of vicarious calibration, however, is greatly limited due to the time- and effort-consuming field measurements of atmosphere and surface. Fortunately, the Radiometric Calibration Network (RadCalNet) provides automated in situ data at multiple sites, thus increasing the opportunities to achieve ongoing ground-reference calibration of in-orbit instruments. The MEdium Resolution Spectrum Imager-II (MERSI-II) onboard FengYun-3D (FY) has the temporal, spectral, spatial, and radiometric capacity for image capture at a level on par with other sensors used worldwide, such as the Moderate Resolution Imaging Spectroradiometer (MODIS). Its on-orbit radiometric performance, however, is assessed in a limited manner. In this study, the reflectance-based vicarious calibration method was employed to calibrate the MERSI-II sensor using ground measurements from RadCalNet at the Railroad Valley Playa site. The calibration of the MERSI-II sensor with large view angles presents difficulties due to the uncertainties introduced by surface bidirectional reflectance distribution function (BRDF) effects. Thus, we performed BRDF correction to harmonize the sensor and ground measurements to consistent observation geometries, before the in-situ measurements were taken as inputs for the 6SV radiative transfer model to predict at-sensor radiance. The calibration results were comprehensively validated with ground data and MODIS benchmark datasets. The results show that accounting for BRDF correction could improve the accuracy of vicarious calibration and ensure inter-consistency between different sensors. An analysis of the vicarious calibration of FY-3D MERSI-II yielded uncertainties of <5% for solar reflective bands, which meets the radiometric accuracy requirements typical for land-monitoring space missions. The proposed approach is also applicable to the calibration of other large footprint sensors.

The challenge of detecting changes in high-resolution remote sensing imagery often stems from the difficulties in effectively extracting features and constructing appropriate change detection models considering the scale characteristics of ground objects. To solve these issues, we propose a novel UNet 3+ change detection method that considers the scale characteristics inherent in various land-cover change types. Our method includes three key steps: a multi-scale segmentation method, a class-specific UNet 3+ method, and an object-oriented change detection method based on UNet 3+. To verify the effectiveness of this method, we select two datasets for experiments and compare our proposed method with the UNet 3+ single-scale sampling method, the class-specific UNet 3+ single-scale sampling method, and the UNet 3+ multi-scale hierarchical sampling method. Our experimental results show that our proposed method has higher overall accuracy and F1, lower missed detection rate and false detection rate, and can detect more changes in ground features than other methods. To verify the scalability of this method, we compare this method with traditional change detection methods such as PCA-k-means, OCVA, a single-scale sampling method based on random forest, and a class-specific object-based method. Experimental results and accuracy indexes show that our proposed method better considers the scale characteristics of ground objects and achieves higher accuracy. Additionally, we compared our proposed method with other DLCD methods including LamboiseNet, BIT, CDNet, FCSiamConc, and FCSiamDiff. Our results show that our proposed method effectively considers edge information and has an acceptable time consumption. Our approach not only considers the full-scale characteristics of the feature extraction but also the scale characteristics of the change detection model. In addition, it considers a more practical feature extraction unit (object), making it more accurate.

The latest Geostationary (GEO) Operational Environmental Satellite-16 (GOES-16) equipped with Advanced Baseline Imager (ABI) has comparable spectral and spatial resolution as low earth orbiting (LEO) sensors [i.e., the Moderate Resolution Imaging Spectroradiometer (MODIS)], but with up-to-the-minute image acquisition capability. This enables greater opportunities to generate two essential climate variables-Leaf area index (LAI) and the fraction of photosynthetically active radiation (FPAR) absorbed by vegetation with more cloud-free observations and at much higher frequency. The improved GEO LAI/FPAR products will increase the capacity for monitoring highly dynamic ecosystems in a timely manner. However, the radiative transfer (RT)-based MODIS operational algorithm cannot be directly applied to GOES-16 ABI data due to different sensor characteristics. Fortunately, it has been shown theoretically and practically, that the RT-based algorithm can be transplanted to any other optical sensors by optimizing the sensor-specific parameters-the single scattering albedo (SSA) and relative stabilized precision (RSP). We built the RT-based ABI-specific lookup tables (LUTs) using a global optimizing algorithm (SCE-UA) that can quickly find the optimal solution. SCE-UA optimizes the SSAs and RSPs in the LUTs by minimizing the difference between ABI and MODIS retrievals and maximizing the main algorithm execution rate. Our efforts indicate that these strategies of parametric optimization is able to decrease the discrepancy between the ABI and MODIS LAI/FPAR products. Comprehensive evaluations were conducted to evaluate ABI retrievals. These indirect inter-comparisons suggest a spatiotemporal consistency between ABI and the benchmark MODIS products, while direct validation with field measurements increases confidence in their accuracy. The proposed approach is applicable to any other optical sensors for LAI/FPAR estimation, especially, GEO sensors (i.e., Himawari-8, Geo-KOMPSAT-2A, FengYun-4 etc.).

Leaf area index (LAI), officially listed as one of essential climate variables, quantifies the structure and amount of vegetation and characterizes the interaction between vegetation and climate. The advanced MEdium Resolution Spectral Imager (MERSI-II) onboard FengYun-3D (FY-3D) can provide twice-daily global observations of earth at a spatial resolution of 250 m. Therefore, it has great potential for promoting the improvement of global LAI products and boosting the development of earth system modelling. However, the existing methods are mostly sensor-specific, they can not be directly applied to MERSI-II data for LAI generation. In this paper, we proposed a sensor-adaptive approach for LAI estimation based on MERSI-II observations. This method is composed of an LAI retrieval look-up table based on radiative transfer theory, which was calibrated by a global optimizing algorithm to adapt MERSI-II characteristics, and a backup algorithm training neural networks with MERSI-II Normalized Difference Vegetation Index (NDVI) and Moderate Resolution Imaging Spectroradiometer (MODIS) LAI. We evaluated the MERSI-II LAI retrievals by intercomparison to MODIS products over mainland China and direct validation using ground-based upscaled LAI reference maps. The assessments demonstrate that (1) the derived MERSI-II LAI products agree well with the MODIS benchmarks in both spatial and temporal respects; (2) compared to the MODIS LAI, the MERSI-II LAI retrievals with less gaps show great potential in improving spatiotemporal continuity; (3) validation versus in-situ measurements reveals acceptable accuracy of the MERSI-II LAI products with a R² of 0.85 and RMSE of 0.82; (4) the proposed parametric optimization strategy could successfully transplant MODIS LAI algorithm to MERSI-II data.

Unmanned aerial vehicle (UAV) remote sensing has found extensive applications in various fields due to its ability to quickly provide remote sensing imagery, and the rapid, even automated, geometric registration of these images is an important component of their time efficiency. While current geometric registration methods based on image matching are well developed, there is still room for improvement in terms of time efficiency due to the presence of the following factors: (1) difficulty in accessing historical reference images and (2) inconsistencies in data sources, scales, and orientations between UAV imagery and reference images, which leads to unreliable matching. To further improve the time efficiency of UAV remote sensing, this study proposes a fully automatic geometric registration framework. The workflow features the following aspects: (1) automatic reference image acquisition by using online map services; (2) automatic ground range and resolution estimation using positional and orientation system (POS) data; (3) automatic orientation alignment using POS data. Experimental validation demonstrates that the proposed framework is able to carry out the fully automatic geometric registration of UAV imagery, thus improving the time efficiency of UAV remote sensing.