Ga2O3 Schottky barrier diodes (SBDs) featuring a field plate (FP) and a composite SiO2/SiNx dielectric layer beneath the FP were fabricated, achieving a breakdown voltage (BV) of 2.4 kV at room temperature (RT). Electrical performance and degradation were analyzed via I–V and C–V measurements from 25 °C to 500 °C, revealing temperature-dependent transport, interface stability, and device stability. Upon returning to RT, the diodes exhibited nearly unchanged forward characteristics, while the BV declined significantly from 2.4 kV to 700 V. This behavior indicates a temperature-induced reduction in the barrier height. The detailed analysis revealed that variable range hopping (VRH) dominated the leakage mechanism at moderate temperatures, while thermal emission (TE) became increasingly significant at temperatures exceeding 400 °C.
Nowadays, the third-generation semiconductor led by GaN has brought great changes to the semiconductor industry. Utilizing its characteristics of a wide bandgap, high breakdown Electric field, and high electron mobility, GaN material is widely applied in areas such as 5G communication and electric vehicles to improve energy conservation and reduce emissions. However, with the progress in the development of GaN electronics, surface and interface defects have become a main problem that limits the further promotion of their performance and stability, increasing leakage current and causing degradation in breakdown voltage. Thus, to reduce the damage, Plasma treatment technologies are introduced in the fabrication process of GaN electronics. Up to now, designs like the high-resistivity p-GaN cap Layer, passivating termination, and surface recovery process have been established via Plasma treatment, reaching the goals of normally-off transistors, diodes with high breakdown voltage and high-reliability GaN electronics, etc. In this article, hydrogen, fluorine, oxygen, and nitrogen Plasma treatment technologies will be discussed, and their application in GaN electronics will be reviewed and compared.
Thermal stability and phase transformation of conductive α-(Al0.16Ga0.84)2O3/Ga2O3 heterostructure on sapphire substrates were investigated via in situ high temperature x-ray diffraction, scanning electron microscopy (SEM), and atomic force microscopy (AFM). The conductive α-(Al0.16Ga0.84)2O3/Ga2O3 heterostructure with fluorine (F) doping was grown by mist-chemical vapor deposition on sapphire substrates, achieving a Hall mobility of 28 cm2/(V s). The heterostructure exhibited thermal stability up to ∼550–575 °C before transforming to β-(AlxGa1−x)2O3/Ga2O3. The transformed β-Ga2O3 is mainly polycrystalline rather than a high-quality epitaxial phase. Reciprocal space mapping results reveal that the edge dislocation density remains consistently higher than the screw dislocation density throughout the heating process, indicating that the crystalline imperfection in α-Ga2O3 is dominated by in-plane mosaicity. After the phase transformation from the α phase to the β phase, catastrophic damage to the film and upheaval of the surface were observed by SEM and AFM.
1 January 2026 in IEEE Transactions on Materials for Electron Devices
The thermal stability and structural evolution of a GaN high-electron mobility transistor (HEMT) heterostructure grown on a Si (111) substrate were investigated using in situ high-temperature x-ray diffraction, reciprocal space mapping (RSM), Raman spectroscopy, and rocking-curve (RC) analysis at varying temperatures. The heterostructure, consisting of a p-GaN cap, an AlGaN barrier, and a GaN channel supported by two AlGaN/AlGaN superlattice buffer layers, maintained clear and periodic satellite peaks up to a temperature of 1000 °C, confirming structural integrity. Symmetric and asymmetric RSM results reveal that both the Si and GaN diffraction peaks shift with increasing temperature, consistent with thermal expansion, and show no significant broadening or relaxation throughout the heating process. The c-lattice constant follows the theoretical expansion predicted by the multi-frequency Einstein model, whereas the a-lattice expansion is slower due to in-plane strain constraints imposed by the underlying Si substrate and buffer layers. Irreversible strain relaxation and thermal mismatch-induced stress redistribution induce a residual compressive strain of roughly 0.3% in the GaN channel after cooling, which has been further confirmed in Raman spectra through a blue shift (∼1 cm−1) of the GaN E2 (high) phonon mode, corresponding to an in-plane strain of −0.15% ± 0.16%. RC analysis revealed an increase in both screw and edge dislocation densities of 28% and 12%, respectively. These results collectively demonstrate that the GaN HEMT heterostructure exhibits robust crystalline stability up to 1000 °C without cracking due to strain relaxation, with only minor strain redistribution and limited dislocation activity, providing experimental evidence for GaN devices' applications under high-temperature conditions.