This work investigates, for the first time, the application of a modified natural magnetite material with 35% of lanthanum for phosphorus (P) recovery from synthetic and actual wastewater under both static (batch) and dynamic (continuous stirred tank reactor (CSTR)) conditions. The characterization results showed that the natural feedstock mainly comprises magnetite and kaolinite. Moreover, the lanthanum-modified magnetite (La-MM) exhibited more enhanced textural, structural, and surface chemistry properties than the natural feedstock. In particular, its surface area (82.7 m2 g−1) and total pore volume (0.160 cm3 g−1) were higher by 86.6% and 255.5%, respectively. The La-MM efficiently recovered P in batch mode under diverse experimental settings with an adsorption capacity of 50.7 mg g−1, which is significantly greater than that of various engineered materials. It also maintained high efficiency even when used for the treatment of actual wastewater, with an adsorption capacity of 47.3 mg g−1. In CSTR mode, the amount of P recovered from synthetic solutions and real wastewater decreased to 33.8 and 10.2 mg g−1, respectively, due to the limited contact time. The phosphorus recovery process involves mainly electrostatic attraction over a wide pH interval, complexation, and precipitation as lanthanum phosphates. This investigation indicates that lanthanum-modified natural feedstocks from magnetite deposits can be regarded as promising materials for P recovery from aqueous solutions.
In this research work, a natural sample from an Omani magnetite (MG) deposit was used for the synthesis of a magnetite decorated with ferrihydrite (MG-Fh), and two lanthanum (La)-modified materials at mass percentages of 5% (MG-Fh-La-5) and 15% (MG-Fh-La-15). These materials were first characterized using various analytical techniques. Then, their phosphorus (P) recovery efficacy from aqueous solutions was studied in batch mode under a wide range of experimental conditions. The characterization results show that compared to the raw feedstock, MG-Fh, MG-Fh-La-5, and especially MG-Fh-La-15 have improved structural, textural, and surface chemistry properties. Adsorption tests indicate that due to the deposition of high contents of lanthanum oxides on its surface, the MG-La-15 exhibited a large P uptake capacity (34.5 mg g−1), which is significantly superior to those determined for MG-La-5 (24.3 mg g−1), MG-Fh (12.4 mg g−1), and various engineered materials published in the literature. Moreover, these materials retain an interesting ability to recover P from real wastewater with a highest adsorbed mass of 27.3 mg g−1, observed for MG-La-15. The P recovery seems to involve both physical and chemical mechanisms, including electrostatic interactions and complexation. This research work shows that La-modified magnetite can be considered a promising and eco-friendly material for P recovery from liquid effluents.
Monitoring heritage landscapes is essential for evaluating long-term ecological integrity, mitigating environmental risks, and supporting sustainable heritage management. This study investigates land cover transformation and ecological environment quality in the Jingmai Mountain Cultural Landscape Heritage Area, a UNESCO World Heritage Site, using high-resolution satellite imagery from 2013 and 2023 and geospatial analysis tools (ENVI 5.3 and ArcGIS 10.8). Supervised classification using the maximum likelihood algorithm was employed to detect land use and land cover changes, and a quantitative ecological environment quality index based on land use areas and ecological coefficients was used to assess regional ecological quality. Land cover dynamics, heritage element shifts, and ecological quality variations before and after the site’s inscription were analyzed. The results indicate that core landscape structures remained relatively stable in both the construction control area and the core application zone. In the construction control area, land cover changes totaled 32.28 km2, with the most significant transformations occurring in forested areas (36%), followed by cultivated lands (19%). In the application zone, total land cover change reached 10.99 km2, primarily involving cultivated lands (33%) and built-up areas (27%). Ecological environment quality indices exhibited a slight positive trend, increasing from 0.4476 to 0.4512 in the construction control area and from 0.2449 to 0.2521 in the application zone between 2013 and 2023. This study provides a decade-long spatial assessment of land use transitions in a UNESCO cultural landscape and proposes a transferable framework for integrating ecological quality evaluation into heritage landscape monitoring. The findings offer evidence-based insights into heritage conservation and rural development planning and support the implementation of sustainable landscape management strategies aligned with national policies and the Sustainable Development Goals.