The foldable tail of the box-type launch vehicle poses a risk of mechanical jamming during the launch process, which is not conducive to the smooth completion of the flight mission. The integrated nonfolding ducted tail proposed in this article can solve the problem of storing the tail in the launch box. Moreover, traditional mechanical control surfaces have been eliminated, and active jet control has been adopted to control the pitch direction of the flight attitude, which can improve the structural reliability of the tail wing. By studying the effects of parameters such as momentum coefficient, jet hole position, jet hole height, and jet angle on improving the aerodynamic performance of ducted tail wing, relatively good jet parameters are selected. Research has found that compared with jet hole height and jet angle, momentum coefficient and jet hole position are more effective in improving the aerodynamic performance of ducted tail wings. Under a trailing edge jet, a relatively good jet condition occurs when the jet hole height is equal to0.25% of the aerodynamic chord length, and the jet angle is equal to 0°. At this time, with the increase of the jet momentum coefficient, the effect of increasing the lift of the ducted tail wing is the best. Finally, a comparative analysis is conducted on the lift and drag characteristics between the ducted tail wing and traditional tail wing, and it is found that the ducted tail wing can generate lift at a 0° attack angle and will not stall in the high attack angle range of 12°~22°, with broad application prospects.
The tail wing of box-launched aircraft needs to be folded in the launch box, which can easily cause malfunctions during flight deployment. This article presents a ducted tail wing aircraft that does not require folding of the tail wing. To address the nonlinear problem of lift coefficient in the ducted tail, an aerodynamic optimization method for ducted tails based on the sparrow search algorithm with back-propagation (SSA-BP) neural network approximate model and multi-objective genetic algorithm fusion is proposed, with the goal of improving the lift-to-drag ratio and linearization degree of the lift curve. The linearization degree of the optimized tail lift coefficient curve is significantly improved, and the lift-to-drag ratio is significantly improved under cruising conditions. Based on this optimization result, the shape of the tail wing and fuselage combination was optimized, and the optimal configuration of the ducted tail wing aircraft was selected, providing a reference for the design of ducted tail wing aircraft.
In this paper, a gliding tail decoy for a UAV is proposed, which can be discarded as a decoy when the UAV encounters danger. Based on an aerodynamic model of the tail decoy, a nonlinear dynamics model of the tail decoy gliding in the air is generated, and a three-layer pyramid general design architecture of the tail decoy is established. In order to subsequently analyze the dynamic characteristics and gliding trajectory of the gliding tail decoy, a gliding trajectory simulation software is developed based on the dynamics model of the gliding tail. Selecting the pre-optimized tail shape as the research object, and analyzing the influence of deployment speed and deployment posture angle on the tail trajectory, it was found that a deployment speed of 60 m/s and a deployment posture angle of 8° are more conducive to the tail obtaining a larger gliding distance. In addition, the effectiveness of the optimization method for the gliding tail in this article was verified. It was found that after optimizing the shape of the gliding tail, the lift coefficient increased in the range of 0°~14°, and the gliding distance increased by 4.2%.