MoS2 nanoscrolls that have inner core radii of ∼250 nm are generated from MoS2 monolayers, and the optical and transport band gaps of the nanoscrolls are investigated. Photoluminescence spectroscopy reveals that a MoS2 monolayer, originally a direct gap semiconductor (∼1.85 eV (optical)), changes into an indirect gap semiconductor (∼1.6 eV) upon scrolling. The size of the indirect gap for the MoS2 nanoscroll is larger than that of a MoS2 bilayer (∼1.54 eV), implying a weaker interlayer interaction between concentric layers of the MoS2 nanoscroll compared to Bernal-stacked MoS2 few-layers. Transport measurements on MoS2 nanoscrolls incorporated into ambipolar ionic-liquid-gated transistors yielded a band gap of ∼1.9 eV. The difference between the transport and optical gaps indicates an exciton binding energy of 0.3 eV for the MoS2 nanoscrolls. The rolling up of 2D atomic layers into nanoscrolls introduces a new type of quasi-1D nanostructure and provides another way to modify the band gap of 2D materials.
Ethylenediamine-modified β-cyclodextrin (Et-β-CD) was immobilized on aggregated silver nanoparticle (NP)-embedded silica NPs (SiO2@Ag@Et-β-CD NPs) for the effective detection of flavonoids. Silica NPs were used as the template for embedding silver NPs to create hot spots and enhance surface-enhanced Raman scattering (SERS) signals. Et-β-CD was immobilized on Ag NPs to capture flavonoids via host-guest inclusion complex formation, as indicated by enhanced ultraviolet absorption spectra. The resulting SiO2@Ag@Et-β-CD NPs were used as the SERS substrate for detecting flavonoids, such as hesperetin, naringenin, quercetin, and luteolin. In particular, luteolin was detected more strongly in the linear range 10−7 to 10−3 M than various organic molecules, namely ethylene glycol, β-estradiol, isopropyl alcohol, naphthalene, and toluene. In addition, the SERS signal for luteolin captured by the SiO2@Ag@Et-β-CD NPs remained even after repeated washing. These results indicated that the SiO2@Ag@Et-β-CD NPs can be used as a rapid, sensitive, and selective sensor for flavonoids.
We have investigated the effect of an Al 2 O 3 passivation layer on the performance of few-layer WS 2 FETs. While the performance of WS 2 FETs is often limited by a substantial decrease in carrier mobility owing to charged impurities and a Schottky barrier between the WS 2 and metal electrodes, the introduction of an Al 2 O 3 overlayer by atomic layer deposition (ALD) suppressed the influence of charged impurities by high- κ dielectric screening effect and reduced the effective Schottky barrier height. We argue that n-doping of WS 2 , induced by positive fixed charges formed at Al 2 O 3 /WS 2 interface during the ALD process, is responsible for the reduction of the effective Schottky barrier height in the devices. In addition, the Al 2 O 3 passivation layer protected the device from oxidation, and maintained stable electrical performance of the WS 2 FETs over 57 d. Thus, the ALD of Al 2 O 3 overlayer provides a facile method to enhance the performance of WS 2 FETs and to ensure ambient stability.
Three types of carbon nanoscroll (CNS) structures that are formed when scrolling up graphene sheets are investigated using Raman spectroscopy and atomic force microscopy (AFM). The CNSs were produced from exfoliated monolayer graphene deposited on a Si chip by applying a droplet of isopropyl alcohol (IPA) solution. The three types of CNS are classified as single-elliptical-core, double-elliptical-core (both with large internal volumes) and collapsed ribbon-like, based on AFM surface profile measurements. We discuss the structure and formation of CNS with much larger hollow cores than is commonly assumed and relate this to the large effective 2D bending stiffness of graphene in the IPA solution. The large elliptical core structures show Raman spectra similar to those previously reported for CNS and indicate little interaction between the scrolled layers. The Raman spectra from ribbon-like structures show additional features that are similar to that of folded graphene. These new features can be related to layer breathing modes combined with some resonance enhancement at specific regions of the ribbon-like CNSs that are due to specific twist angles produced when the structure folds/collapses.
The electrical performance of suspended few-layer MoTe2 field-effect-transistors with ionic liquid gating has been investigated. The suspended structure not only enhances the mobility of MoTe2 by removing the influence of the substrate but also allows ions to accumulate on both the top and the bottom surface of MoTe2. The consequent increase in the gate capacitance resulted in an improved subthreshold swing (∼73 mV/dec) and on–off ratio (106) at room temperature for suspended MoTe2 compared to substrate-supported devices. Suspended transistors with ionic liquid gating enable a larger charge density compared to ionic liquid gated supported devices and may provide a useful platform to study screening physics in 2D materials.
The recent report of a p-type graphene(Gr)/carbon-nanotube(CNT) barristor facilitates the application of graphene barristors in the fabrication of complementary logic devices. Here, a complementary inverter is presented that combines a p-type Gr/CNT barristor with a n-type Gr/MoS barristor, and its characteristics are reported. A sub-nW (~0.2 nW) low-power inverter is demonstrated with a moderate gain of 2.5 at an equivalent oxide thickness (EOT) of ~15 nm. Compared to inverters based on field-effect transistors, the sub-nW power consumption was achieved at a much larger EOT, which was attributed to the excellent switching characteristics of Gr barristors.