Recent publications on acoustic MEMS transducers present a new three-dimensional folded diaphragm that utilizes buried in-plane vibrating structures to increase the active area from a small chip volume. Characterization of the mechanical properties plays a key role in the development of new MEMS transducers, whereby established measurement methods are usually tailored to structures close to the sample surface. In order to access the lateral vibrations, extensive and destructive sample preparation is required. This work presents a new passive measurement technique that combines acoustic transmission measurements and lumped-element modelling. For diaphragms of different lengths, compliances between 0.08 × 10−15 and 1.04 × 10−15 m3/Pa are determined without using destructive or complex preparations. In particular, for lengths above 1000 µm, the results differ from numerical simulations by only 4% or less.
Recent publications on acoustic MEMS transducers present a new three-dimensional folded diaphragm that utilizes buried in-plane vibrating structures to increase the active area from a small chip volume. Characterization of the mechanical properties plays a key role in the development of new MEMS transducers, whereby established measurement methods are usually tailored to structures close to the sample surface. In order to access the lateral vibrations, extensive and destructive sample preparation is required. This work presents a new passive measurement technique that combines acoustic transmission measurements and Lumped-element modelling. For diaphragms of different lengths, compliances between 0.08 ∙ 10-15 and 1.04 ∙ 10-15 m³/Pa are determined without using destructive or complex preparations. In particular, for lengths above 1000 µm, the results differ from numerical simulations only by 4% or less.
This paper demonstrates a novel concept for an area efficient piezoelectric MEMS speaker. A folded piezoelectric diaphragm can utilize the whole chip volume by adding up multiple laterally vibrating actuators. The actuation is accomplished by conformally deposited aluminum nitride (AlN) layers, which are fabricated using atomic layer deposition (ALD). This work describes the design, functionality and first performance of a MEMS speaker. Acoustic measurements show a sound pressure level (SPL) of 59 dB in a 0.13 cm 3 big coupled volume.
Three-dimensional folded membranes are set to innovate MEMS designs for acoustic transducers by using lateral movement to increase their active area. Determination of the mechanical characteristics of such membranes is challenging, since established techniques mainly target in-plane structures. This paper presents an acoustic method to determine the mechanical compliances of such folded membranes. The results show compliances between 0.08•10-15 and 10•10-15 m 3 /Pa for different membrane lengths.