Ground-penetrating radar (GPR) is widely employed as a non-destructive tool for subsurface detection of transport infrastructures. Typically, data collected by high-frequency antennas offer high resolution but limited penetration depth, whereas data from low-frequency antennas provide deeper penetration but lower resolution. To simultaneously achieve high resolution and deep penetration via a composite radargram, a Non-Subsampled Contourlet Transform (NSCT) algorithm-based multifrequency GPR data-fusion method is proposed by integrating NSCT with appropriate fusion rules, respectively, for high-frequency and low-frequency coefficients of decomposed radargrams and by incorporating quantitative assessment metrics. Despite the advantages of NSCT in image processing, its applications to GPR data fusion for concealed damage identification of transport infrastructures are rarely reported. Numerical simulation, tunnel model test, and on-site road test are conducted for performance validation. The comparison between the evaluation metrics before and after fusion demonstrates the effectiveness of the proposed fusion method. Both shallow and deep hollow targets hidden in the simulated concrete structure, real tunnel model, and road are identified through one radargram obtained by fusing different radargrams. The significance of this study is producing a high-quality composite radargram to enable multi-depth concealed damage detection and exempting human interference in the interpretation of multiple radargrams.
The geological condition monitoring and identification based on TBM-equipped sensors is of great significance for efficient and safe tunnel construction. Full-scale rotary cutting experiments are carried out using tunnel-boring machine disc cutters. Thrust, torque and vibration sensors are equipped on the rotary cutting machine (RCM). A stacking ensemble-learning model for real-time prediction of rock mass classification using features of mathematical statistics is proposed. Three signals, thrust, torque and a novel vibration spectrogram-based local amplification feature, are fed into the model and trained separately. The results show that the stacked ensemble-learning model has better accuracy and stability than any single model, showing a good application prospect in the rock mass classification.
14 October 2021 in Journal of Advanced Transportation
This paper presents the numerical study on propagative waves in a periodically supported rail below 6000 Hz. A periodic rail model, which considers the effects of both the periodic supports and the rail cross section deformation, has been established based on the periodic structure theory and the finite element method. Two selection approaches are proposed to obtain the concerned dispersion curves from the original calculation results of dispersion relations. The differences between the dispersion curves of different support conditions are studied. The propagative waves corresponding to the dispersion curves are identified by the wave modes. The influences of periodic supports on wave modes in pass bands are revealed. Further, the stop band behaviors are investigated in terms of the bounding frequencies, the standing wave characteristics, and the cross-sectional modes. The results show that eight propagative waves with distinct modes exist in a periodically supported rail below 6000 Hz. The differences between the dispersion curves of periodically and continuously supported rails are not obvious, apart from the stop band behaviors. All the bounding-frequency modes of the stop bands are associated with the standing waves. Two bounding-frequency modes of the same stop band can be regarded as two identical standing waves with the longitudinal translation of the quarter-wavelength, one of which is the so-called pinned-pinned resonance.