The development of low-carbon fuels from renewable resources is a key measure to reduce carbon dioxide emissions and mitigate climate change. Biomass gasification with subsequent gas processing and purification is a promising route to produce low-carbon hydrogen. In the past decade, simulation-based modelling using Aspen Plus software has supported the investigation of future potential industrial applications of this pathway. This article aims to provide a review of the modelling and economic assessment of woody biomass gasification-based hydrogen production, with focus on the evaluation of the model accuracy in predicting producer gas composition in comparison with experimental data depending on the approach implemented. The assessment of comprehensive models, which integrate biomass gasification with gas processing and purification, highlights how downstream gas processing could improve the quality of the syngas and, thus, the hydrogen yield. The information in this article provides an overview of the current practices, challenges, and opportunities for future research, particularly for the development of a comprehensive pathway for hydrogen production based on biomass gasification. Moreover, this review includes a techno-economic assessment of biomass to hydrogen processes, which will be useful for implementation at industrial-scale.
1 July 2021 in International Journal of Hydrogen Energy
The aim of this paper is to present a decision support system (DSS) to capture the complexity of the transition of a national energy system to net zero in the context of multiple sustainability themes. The paper proposes an integrated assessment framework that combines dynamic systems modeling, sustainability indicators, and multi-criteria decision analysis (MCDA) with direct stakeholder involvement. To illustrate the use of the DSS, the paper compares bundles of climate change policies that aim to decarbonize the road transport sector in Iceland. Eighteen scenarios and alternative development trajectories are defined for the Icelandic energy system based on a combination of three main driving forces. These are, firstly, economic development (three cases); secondly, changes in energy efficiency (two cases); and finally, three climate policy bundles aimed at increasing the share of electric vehicles. Based on the results from the integrated assessment framework, the performance scores of the climate policy bundles are compared across the following five sustainability themes: social impact; economic development; environmental impact; energy security; and technical aspects. The findings confirm that a different conclusion may be reached when multiple sustainability themes are applied in the selection of preferred policy bundles as compared to conventional techno-economic criteria. Banning the registration of fossil-fueled vehicles, combined with economic instruments, offers the best decarbonizing strategy to reach climate and energy policy goals simultaneously.
10 February 2025 in Biomass Conversion and Biorefinery
The transition to sustainable energy has attracted strong interest worldwide in hydrogen production from biomass with integrated CO2 capture. The sorption-enhanced water–gas shift (SEWGS) process presents a promising approach for upgrading the biomass gasification producer gas with efficient carbon capture. In this study, a kinetic-based model for the SEWGS process using a CaO-based sorbent and biomass gasification producer gas as the feeding gas was developed in Aspen Plus. The model was validated against experimental data from the literature using pure CO feed and biomass gasification producer gas. Sensitivity analysis was conducted to assess the impacts of key operating parameters, including carbonation temperature, steam-to-carbon ratio, and sorbent quantity, on the SEWGS process. The results of this study indicate that the optimum carbonation temperature is in the range of 650–700 °C with high reaction rates and high hydrogen yield. Increasing sorbent loading improves the CO2 capture efficiency, while the optimum H2O/CO ratio was found to be 3 with high CO conversion. Under the conditions of carbonation temperature of 650 °C, CaO/(CO + CO2) ratio of 20 and H2O/CO ratio of 3, the H2 concentration of the producer gas increased from 53 to 87 vol%. However, an excessively high H2O/CO ratio negatively impacts CO2 capture efficiency and decreases the H2 concentration.