Hong Mao

Mr. Hong Mao


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
YSYinghao Shen
Yinghao Shen
BLBing Liu
Bing Liu
HJHongfeng Jiang
Hongfeng Jiang
HMHong Mao
Hong Mao
MLMingrui Li
Mingrui Li
ZYzhi cheng Yang
zhi cheng Yang
The Weixinan Sag in the Beibuwan Basin is rich in shale oil resources. However, the reservoirs exhibit rapid phase changes, strong compartmentalization, thin individual layers, and high-frequency vertical variations in the thin interbedded sandstone and mudstone. These factors can restrict the height of hydraulic fracture propagation. Additionally, the low-porosity and low-permeability shale oil reservoirs face challenges such as low production rates and rapid decline. To address these issues, the Plannar3D full 3D fracturing model was used to simulate hydraulic fracture propagation and to study the main controlling factors for fracture propagation in the second member of the Liushagang Formation. Based on the concept of geological–engineering integration, a sweet spot evaluation was conducted to identify reservoirs with relatively better brittleness, reservoir properties, and oil content as the fracturing targets for horizontal wells. The UFM model was then applied to optimize fracturing parameters. This study indicates that the matrix-type oil shale has a high clay mineral content, resulting in a low Young’s modulus and poor brittleness. This makes hydraulic fracture propagation difficult and leads to less effective reservoir stimulation. In contrast, hydraulic fractures propagate more easily in high-brittleness interlayer-type oil shale. Therefore, it is recommended to prioritize the extraction of shale oil from interlayer-type oil shale reservoirs. The difference in interlayer stress is identified as the primary controlling factor for cross-layer fracture propagation in the study area. Based on the concept of geological–engineering integration, a sweet spot evaluation standard was established for the second member of the Liushagang Formation, considering both reservoir quality and engineering quality. Four sweet spot zones of interlayer-type oil shale reservoirs were identified according to this evaluation standard. To achieve uniform fracture initiation, a differentiated segment and cluster design was implemented for certain high-angle sections of well WZ11-6-5d. Interlayer-type oil shale was selected as the fracturing target, and the UFM was used for hydraulic fracture propagation simulation. Fracturing parameters were optimized with a focus on hydraulic fracture characteristics and the estimated ultimate recovery (EUR). The optimization results were as follows: a single-stage length of 50 m, cluster spacing of 15 m, pump injection rate of 10 m3/min, fluid intensity of 25 m3/m, and proppant intensity of 3.5 t/m. The application of these optimized fracturing parameters in field operations resulted in successful fracturing and the achievement of industrial oil flow.

20 September 2024 in Processes
Verified
Journal Article
Open access
PDF file
HMHong Mao
Hong Mao
YSYinghao Shen
Yinghao Shen
YYYao Yuan
Yao Yuan
KWKunyu Wu
Kunyu Wu
LXLin Xie
Lin Xie
YWYouyu Wan
Youyu Wan
Yingxiongling shale oil is considered a critical area for future crude oil production in the Qaidam Basin. However, the unique features of the Yingxiongling area, such as extraordinary thickness, hybrid sedimentary, and extensive reformation, are faced with several challenges, including an unclear understanding of the main controlling factors for hydraulic fracturing propagation, difficulties in selecting engineering sweet layers, and difficulties in optimizing the corresponding fracturing schemes, which restrict the effective development of production. This study focuses on mixed fine-grained sedimentary rocks, employing a high-resolution integrated three-dimensional geological-geomechanical model to simulate fracture propagation. By combining laboratory core experiments, a holistic investigation of the controlling factors was conducted, revealing that hydraulic fracture propagation in mixed fine-grained sedimentary rocks is mainly influenced by rock brittleness, natural fractures, stress, varying lithologies, and fracturing parameters. A comprehensive compressibility evaluation standard was established, considering brittleness, stress contrast, and natural fracture density, with weights of 0.3, 0.23, and 0.47. In light of the high brittleness, substantial interlayer stress differences, and localized developing natural microfractures in the Yingxiongling mixed fine-grained sedimentary rock reservoir, this study examined the influence of various construction parameters on the propagation of hydraulic fractures and optimized these parameters accordingly. Based on the practical application in the field, a “three-stage” stimulation strategy was proposed, which involves using high-viscosity fluid in the front to create the main fracture, low-viscosity fluid with sand-laden slugs to create volume fractures, and continuous high-viscosity fluid carried sand to maintain the conductivity of the fracture network. The resulting oil and gas seepage area corresponding to the stimulated reservoir volume (SRV) matched the actual well spacing of 500 m, achieving the effect of full utilization. The understanding of the controlling factors for fracture expansion, the compressibility evaluation standard, and the main process technology developed in this study effectively guide the optimization of transformation programs for mixed fine-grained sedimentary rocks.