In recent years, fusion energy has assumed an important role in the energy scenario, being a sustainable, environmentally friendly, and practically inexhaustible energy source. Fusion energy could play a crucial role in fully decarbonized electricity production in the second half of this century, helping to meet the increasing energy demand. One of the studied reactors is ARC, a tokamak fusion device characterized by a compact and high-field design initially conceived by researchers at the Massachusetts Institute of Technology, which the Commonwealth Fusion System (CFS) plans to construct in the next decade. This paper is focused on the analysis and development of different configurations for the ARC Balance of Plant Power Conversion System, with the aim of improving the thermodynamic efficiency, which is one of the pillars of sustainability. Three cycles were studied by using the General Electric GateCycleTM software: a supercritical steam Rankine cycle, a supercritical CO2 Brayton cycle, and a supercritical helium Brayton cycle. The thermal efficiency of the three options was compared to select the most promising solution. The results showed that the supercritical steam cycle is the best configuration in terms of cycle efficiency for the ARC FNSF Pilot phase.
In the fight against climate change through the progress of fusion technology, the Affordable, Robust and Compact (ARC) fusion reactor design is under development at Commonwealth Fusion Systems (CFS) and Massachusetts Institute of Technology (MIT)- Plasma Science and Fusion Center, in collaboration with the Ente Nazionale Idrocarburi (ENI) S.p.A. The reactor features demountable superconducting toroidal field coils and a replaceable vacuum vessel immersed in a Fluorine Lithium Beryllium (FLiBe) molten salt blanket. The low-pressure molten salt cools the divertors and the blanket, shields the magnets and acts as tritium breeder and tritium carrier. Tritium must be recovered efficiently from the salt to fuel the reactor, minimizing its inventory and its migration outside the FLiBe loop. The current work is aimed at presenting a preliminary design of a Double-Wall Heat eXchanger (DWHX) to be installed in an ARC-class reactor primary cooling system. The main feature is the presence of a flowing sweep gas gap which captures tritium and prevents its diffusion toward the secondary system. For the DWHX, thermal-hydraulic and tritium transport analyses were performed, considering a supercritical water Rankine power conversion system on the secondary side to carry out the calculations. To assess tritium extraction capabilities of the DWHX, the tritium extraction efficiency has been evaluated. Calculation results highlighted how the current configuration is not adequate to remove tritium, in fact the tritium extraction efficiency is very low. On the other side, it seems to act adequately as tritium permeation barrier.