In recent years, fusion energy has assumed an important role in the energy scenario, being a sustainable, environmentally friendly, and practically inexhaustible energy source. Fusion energy could play a crucial role in fully decarbonized electricity production in the second half of this century, helping to meet the increasing energy demand. One of the studied reactors is ARC, a tokamak fusion device characterized by a compact and high-field design initially conceived by researchers at the Massachusetts Institute of Technology, which the Commonwealth Fusion System (CFS) plans to construct in the next decade. This paper is focused on the analysis and development of different configurations for the ARC Balance of Plant Power Conversion System, with the aim of improving the thermodynamic efficiency, which is one of the pillars of sustainability. Three cycles were studied by using the General Electric GateCycleTM software: a supercritical steam Rankine cycle, a supercritical CO2 Brayton cycle, and a supercritical helium Brayton cycle. The thermal efficiency of the three options was compared to select the most promising solution. The results showed that the supercritical steam cycle is the best configuration in terms of cycle efficiency for the ARC FNSF Pilot phase.
Flux pumps (FPs) are contactless DC power supply systems used to energize superconducting magnets, with potential applications ranging from magnetic resonance imaging (MRI) to aerospace electric propulsion, nuclear fusion, and others. Among the various FP topologies, the dynamo FP belongs to the travelling-wave category, generating DC voltage through the rotation of permanent magnets (PM) facing high-temperature superconductor (HTS) tapes. One of the primary challenges of this system is the limited voltage level that can be generated, which results in a prolonged magnet charging time. A promising approach to optimize and enhance the dynamo FP configuration is the integration of a ferromagnetic material positioned behind the HTS tape with respect to the rotor. This addition strengthens the magnetic field acting on the HTS tape when the permanents magnets move in its vicinity, thus increasing the output voltage. This phenomenon has been confirmed by a few recent studies. However, it remains uncertain how this affects the losses induced in the HTS tape and, therefore, the overall energetic performance of the FP. This is a relevant problem as FPs are mainly used for their energy efficiency. This paper extends the volume integral equation method, previously developed to model the dynamic behavior and to optimize the dynamo FP, to include the effect of a back iron material behind the HTS tape. The method is used to simulate and to compare the performance of different layouts of dynamo FPs, with and without back iron, to highlight its impact on system losses and efficiency. The results suggest that the magnetic circuit improves the dynamo's performance, accelerating the load magnet charging process and enhancing overall efficiency.
To predict the favorable thermodynamical conditions and characterize cryogenic pellet formations for applications in nuclear fusion reactors, a high–throughput molecular dynamics study based on a unified framework to simulate the growth process of cryogenic solids (molecular deuterium, neon, argon) under gas pressure have been designed. These elements are used in fusion nuclear plants as fuel materials and to reduce the damage risks for the plasma-facing components in case of a plasma disruption. The unified framework is based on the use of workflows that permit management in HPC facilities, the submission of a massive number of molecular dynamics simulations, and handle huge amounts of data. This simplifies a variety of operations for the user, allowing for significant time savings and efficient organization of the generated data. This approach permits the use of large-scale parallel simulations on supercomputers to reproduce the solid–gas equilibrium curves of cryogenic solids like molecular deuterium, neon, and argon, and to analyze and characterize the reconstructed solid phase in terms of the separation between initial and reconstructed solid slabs, the smoothness of the free surfaces and type of the crystal structure. These properties represent good indicators for the quality of the final materials and provide effective indications regarding the optimal thermodynamical conditions of the growing process.