We show the performance of solar heating by coupling a Solar Water Heating System (SWHS) with an Absorption Heat Transformer (AHT) for annual continuous water heating. Solar Fraction (SF), Solar Heat Gain (SHG), and Auxiliary Heat (Qaux) were meticulously assessed for three Mexican cities located in the most characteristic climates (Saltillo, Toluca, and Tapachula). This rigorous assessment process ensures the reliability and accuracy of our findings. The potential reduction in net solar collector area (Ac) and storage tank volume (Vt) can be seen by comparing its annual performance to that of a conventional SWHS. Both configurations were designed to deliver the same hot water amount (0.019 kg/s, 1693.4 L/day, heating from 15.8 to 94.4 °C) and simulated using TRNSYS software version 16.01 concerning combinational systems. The results showed that SWHS-AHT achieved superior performance in solar water heating, achieving a higher SF (up to 99.6%) and SHG (up to 1352 kWh/m2-year) compared to the conventional SWHS. On the other hand, the SWHS-AHT achieved similar performance to a conventional SWHS with up to 60% less Ac. For instance, in Tapachula, a SWHS-AHT with an Ac of 150 m2 and a Vt of 18 m3 matched the performance of a SWHS with an Ac of 375 m2 and a Vt of 15 m3. Notably, both systems required the same Qaux. Thus, the Qaux requirement shows that SWHS-AHT is promising for industrial applications in Mexico, offering improved performance and a reduced footprint.
Solar energy is one of the main renewable energy resources due to its abundance. It can be used for two purposes, thermal or photovoltaic applications. However, when the resource obtained is mixed, it is called photovoltaic thermal hybrid, where the solar panels generate electricity and are provided with a heat exchanger to absorb energy through a water flow. This is one of the techniques used by the scientific community to reduce the excess temperature generated by solar radiation in the cells, improving the electrical efficiency of photovoltaic systems and obtaining fluid with higher temperature. In this work, the thermal behavior of a heat exchanger equipped with fins in its interior to increase the thermal efficiency of the system was analyzed using CFD (Computational Fluid Dynamics). The results showed that the average fluid outlet temperature was 75.31 °C, considering an incident irradiance of 1067 and a fluid inlet temperature of 27 °C. The operating conditions were obtained from published experimental studies, achieving 97.7% similarity between the two. This was due to the boundary conditions of the heat flux (1067 impinging directly on the coupled cells and the heat exchanger in a working area of 0.22 .
Transformers are state-of-the-art equipment that supports the solution to some of the main problems affecting the world's population, such as water desalination. The heat exchange equipment that they comprise is affected by corrosion. For decades, the best materials for their design have been sought; however, the search continues, leaving an area for continuous improvement. In this work, we propose an austenitic steel with a silicon carbide coating for the design of transformer generators, which meets the requirements for the design of this equipment. Silicon Carbon is a ceramic material with a high heat transfer coefficient, its main characteristic, making it ideal for the design of heat exchangers. It is also a good protector against corrosion of steels. The microstructure of the composite material will be analyzed using a scanning electron microscope and its composition using an X-ray diffraction instrument. The material will be characterized in terms of corrosion and its mechanical behavior.