The demand for effective asphalt additives is growing as road infrastructure ages and more sustainable pavement solutions are needed. Tire pyrolysis oil (TPO) is an example material that has been gaining attention as a potential asphalt additive. While physical performance grade (PG) temperatures are the predominant performance requirements for asphalt binders, chemical properties are also significant in the evaluation of asphalt performance. There is a need to chemically characterize the aging of asphalt binders modified with TPO and link chemical changes in binder components to binder performance. This study compares 2%, 4%, and 8% TPO and asphalt binder blends via dynamic shear rheometry (DSR), Fourier-transform infrared (FTIR) spectroscopy, and nuclear magnetic resonance (NMR) relaxometry. The variability in the modified blends was seen by both physical and chemical testing during four different blending times (1, 60, 120, and 240 min). After blending, high and intermediate PGs were determined by physical testing. The 8% TPO blend reduced the high PG of the binder from 64 °C to 58 °C. This effect was confirmed by chemical testing through changes in carbonyl indices and NMR relaxation times. With more oil present in the binder matrix, the binder’s resistance to rutting was reduced. While the high PG was hindered, the intermediate PG remained unchanged for all TPO blends. This physical similarity was mirrored in chemical testing. The chemical and physical variability along with the hindrance of the high PG temperature indicate that more treatment may be needed before TPO can be effectively applied to asphalt binders. This study suggests a correlation between physical performance and key chemical indicators.
Asphalt binders in pavements lose their stability through aging and eventually fail in the field. Using nuclear magnetic resonance (NMR) to monitor the primary longitudinal relaxation time of asphalt samples and the ratio of material that carries this primary relaxation time has been shown to indicate the impact of ultraviolet (UV) radiation on the aging of asphalt pavements. Longitudinal NMR relaxation was used to investigate two types of proposed asphalt rejuvenators, a bio-oil-based rejuvenator and a crude-oil-based rejuvenator. Two different binders with the performance grades (PG) 64-22 and 76-22 were considered for their interactions with the rejuvenators. After 72 h of exposure to intense UV radiation, specifically designed NMR relaxometry experiments were applied to compare the rejuvenation capabilities of the two rejuvenator samples. The crude oil-based rejuvenator was found to exhibit relaxation times similar to the binder samples while the bio-based material showed relaxation times that pointed to different nuclear hydrogen environments. Both rejuvenators reduced the primary relaxation time of the PG 76-22 binder, which indicates that their stiffness was reduced. Both types of rejuvenators also seemed to prevent the effects of UV aging. Two mechanisms of rejuvenation were identified by NMR relaxometry. The primary relaxation time can be used to indicate a change in stiffness while the primary ratio of the material is tied to oxidative aging. Oxidative aging creates distinct hydrogen environments due to asphaltene aggregation. The bio-based rejuvenator only reduced the binder’s stiffness, while the crude oil-based rejuvenator also reduced the aggregation of asphaltenes. Consequently, the bio-based rejuvenator could be classified as an asphalt softener, while the oil-based material acted like a true rejuvenator.
Asphalt pavements make up a majority of the essential transportation systems in the US. Asphalt mixtures age and degrade over time, reducing the pavement performance. Pavement performance critically depends on the aging of asphalt binder. The aging of asphalt binder during construction is traditionally modeled by rolling thin film oven (RTFO) testing, while aging during service life is modeled by pressure aging vessel (PAV) testing. Comparing these models to the aging of binders in actual pavements is limited because, to be used for current testing, binders must be separated from the pavement’s aggregate by solvent extraction. Solvent extraction will, at least in part, compromise the structural integrity of asphalt binder samples. Spin-lattice NMR relaxometry has been shown to nondestructively evaluate asphalt properties in situ through the analysis of hydrogen environments. The molecular mobility of hydrogen environments and with it the stiffness of asphalt binder samples can be determined by characteristic T1 relaxation times, indicating the complexity of asphalt-binder aging. In this study, two laboratory-generated asphalt mixtures, a failed field sample, and several laboratory-aged binder samples are compared by NMR relaxometry. NMR relaxometry was found to be able to differentiate between asphalt samples based on their binder percentage. According to the relaxometry findings, the RTFO binder aging compared favorably to the 6% laboratory-mixed sample. The PAV aging, however, did not compare well to the relaxometry results found for the field-aged sample. The amount of aggregate was found to have an influence on the relaxation times of the binder in the mixed samples and an inverse proportionality of the binder content to the primary NMR relaxation time was detected. It is concluded that molecular water present in the pores of the aggregate material gives rise to such a relationship. The findings of this study lay the foundation for nondestructive asphalt performance evaluation by NMR relaxometry.
About Me
Current Chemical Engineering Ph.D. Student at Missouri University of Science and Technology.
Current Chemical Engineering Ph.D. Student at Missouri University of Science and Technology.