Rebecca Marie Herndon

Ms. Rebecca Marie Herndon

Civil Engineering, Missouri University of Science and Technology, Rolla, Missouri, USA
orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 April 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
RHRebecca Marie Herndon
Rebecca Marie Herndon
JBJay Ram Balasubramanian
Jay Ram Balasubramanian
KWKlaus Woelk
Klaus Woelk
MAMAGDY ABDELRAHMAN
MAGDY ABDELRAHMAN
The demand for effective asphalt additives is growing as road infrastructure ages and more sustainable pavement solutions are needed. Tire pyrolysis oil (TPO) is an example material that has been gaining attention as a potential asphalt additive. While physical performance grade (PG) temperatures are the predominant performance requirements for asphalt binders, chemical properties are also significant in the evaluation of asphalt performance. There is a need to chemically characterize the aging of asphalt binders modified with TPO and link chemical changes in binder components to binder performance. This study compares 2%, 4%, and 8% TPO and asphalt binder blends via dynamic shear rheometry (DSR), Fourier-transform infrared (FTIR) spectroscopy, and nuclear magnetic resonance (NMR) relaxometry. The variability in the modified blends was seen by both physical and chemical testing during four different blending times (1, 60, 120, and 240 min). After blending, high and intermediate PGs were determined by physical testing. The 8% TPO blend reduced the high PG of the binder from 64 °C to 58 °C. This effect was confirmed by chemical testing through changes in carbonyl indices and NMR relaxation times. With more oil present in the binder matrix, the binder’s resistance to rutting was reduced. While the high PG was hindered, the intermediate PG remained unchanged for all TPO blends. This physical similarity was mirrored in chemical testing. The chemical and physical variability along with the hindrance of the high PG temperature indicate that more treatment may be needed before TPO can be effectively applied to asphalt binders. This study suggests a correlation between physical performance and key chemical indicators.

14 September 2024 in Physchem
Verified
Journal Article
Open access
PDF file
RHRebecca Marie Herndon
Rebecca Marie Herndon
JBJay Ram Balasubramanian
Jay Ram Balasubramanian
MAMAGDY ABDELRAHMAN
MAGDY ABDELRAHMAN
KWKlaus Woelk
Klaus Woelk
Asphalt binders in pavements lose their stability through aging and eventually fail in the field. Using nuclear magnetic resonance (NMR) to monitor the primary longitudinal relaxation time of asphalt samples and the ratio of material that carries this primary relaxation time has been shown to indicate the impact of ultraviolet (UV) radiation on the aging of asphalt pavements. Longitudinal NMR relaxation was used to investigate two types of proposed asphalt rejuvenators, a bio-oil-based rejuvenator and a crude-oil-based rejuvenator. Two different binders with the performance grades (PG) 64-22 and 76-22 were considered for their interactions with the rejuvenators. After 72 h of exposure to intense UV radiation, specifically designed NMR relaxometry experiments were applied to compare the rejuvenation capabilities of the two rejuvenator samples. The crude oil-based rejuvenator was found to exhibit relaxation times similar to the binder samples while the bio-based material showed relaxation times that pointed to different nuclear hydrogen environments. Both rejuvenators reduced the primary relaxation time of the PG 76-22 binder, which indicates that their stiffness was reduced. Both types of rejuvenators also seemed to prevent the effects of UV aging. Two mechanisms of rejuvenation were identified by NMR relaxometry. The primary relaxation time can be used to indicate a change in stiffness while the primary ratio of the material is tied to oxidative aging. Oxidative aging creates distinct hydrogen environments due to asphaltene aggregation. The bio-based rejuvenator only reduced the binder’s stiffness, while the crude oil-based rejuvenator also reduced the aggregation of asphaltenes. Consequently, the bio-based rejuvenator could be classified as an asphalt softener, while the oil-based material acted like a true rejuvenator.

13 August 2024 in Physchem
Verified
Journal Article
Open access
PDF file
RHRebecca Marie Herndon
Rebecca Marie Herndon
JBJay Ram Balasubramanian
Jay Ram Balasubramanian
MAMAGDY ABDELRAHMAN
MAGDY ABDELRAHMAN
KWKlaus Woelk
Klaus Woelk
Asphalt pavements make up a majority of the essential transportation systems in the US. Asphalt mixtures age and degrade over time, reducing the pavement performance. Pavement performance critically depends on the aging of asphalt binder. The aging of asphalt binder during construction is traditionally modeled by rolling thin film oven (RTFO) testing, while aging during service life is modeled by pressure aging vessel (PAV) testing. Comparing these models to the aging of binders in actual pavements is limited because, to be used for current testing, binders must be separated from the pavement’s aggregate by solvent extraction. Solvent extraction will, at least in part, compromise the structural integrity of asphalt binder samples. Spin-lattice NMR relaxometry has been shown to nondestructively evaluate asphalt properties in situ through the analysis of hydrogen environments. The molecular mobility of hydrogen environments and with it the stiffness of asphalt binder samples can be determined by characteristic T1 relaxation times, indicating the complexity of asphalt-binder aging. In this study, two laboratory-generated asphalt mixtures, a failed field sample, and several laboratory-aged binder samples are compared by NMR relaxometry. NMR relaxometry was found to be able to differentiate between asphalt samples based on their binder percentage. According to the relaxometry findings, the RTFO binder aging compared favorably to the 6% laboratory-mixed sample. The PAV aging, however, did not compare well to the relaxometry results found for the field-aged sample. The amount of aggregate was found to have an influence on the relaxation times of the binder in the mixed samples and an inverse proportionality of the binder content to the primary NMR relaxation time was detected. It is concluded that molecular water present in the pores of the aggregate material gives rise to such a relationship. The findings of this study lay the foundation for nondestructive asphalt performance evaluation by NMR relaxometry.

11 October 2024 in Physchem
Verified
Journal Article
Open access
PDF file
RHRebecca Marie Herndon
Rebecca Marie Herndon
KLKevin Lai
Kevin Lai
MAMAGDY ABDELRAHMAN
MAGDY ABDELRAHMAN
KWKlaus Woelk
Klaus Woelk
Asphalt binder performance grades (PGs) are important metrics in designing pavements for effective transportation infrastructure. The PG system relies on the binder’s stiffness and is determined through energy- and time-intensive physical testing. Physical properties, like stiffness, can also be determined by spin–lattice NMR relaxometry, a non-destructive chemical method. NMR relaxometry can quantify the molecular mobility of materials by determining relaxation times from exponential decays of excited nuclear magnetization. While relaxation times have been used to determine physical properties of materials, a quantitative relation to the PG grades of asphalt binder is yet to be established. In this study, T1 NMR relaxation analyses were used to differentiate between solid asphalt binders and determine the fastest yet still-reliable method of modeling exponential decay data. Algorithms that fit exponential decay relaxation data using one, two, or three independent relaxation times were compared with a 128-coefficient discrete inverse Laplace transformation to determine the best mathematical fit for a comparative analysis. The number of data points was then reduced from 256 to 64 to 16 and finally to 8 data points on a relaxation curve to reduce the testing time and determine the minimum number of data points needed for comparison. Two batches of PG 64-22 asphalt binder, along with samples of PG 76-22 and 94-10 binders, were investigated. The best compromise between measuring time and data reliability was found by acquiring 64 data points and then using a biexponential model to fit the experimental data. The PG 64-22 sources provided similar results, indicating similar physical properties. The PG 64-22 and PG 76-22 binders could also be compared via monoexponential data fits, but the PG 94-10 samples required an additional relaxation parameter for comparison. To differentiate all three binder grades, the primary relaxation times, along with their relative ratios, were utilized.

6 December 2024 in Journal of Modern Industry and Manufacturing
Verified
Journal Article
Open access
PDF file
RHRebecca Marie Herndon
Rebecca Marie Herndon
MAMagdy Abdelrahman
Magdy Abdelrahman
KWKlaus Woelk
Klaus Woelk
Objective: Asphalt binder, a byproduct of the crude-oil refining process, is commonly used in road construction due to its favorable response to physical stresses. However, it is also susceptible to environmental aging, including temperature variations and ultraviolet (UV) radiation. Standard laboratory methods for studying asphalt binder aging primarily focus on factors like temperature, pressure, and oxygen, often neglecting the impact of UV radiation. This study employs 1H spin-lattice nuclear magnetic resonance (NMR) relaxometry to investigate the effects of UV radiation on asphalt binder aging compared to temperature-induced aging. Methods: Primary relaxation times and ratios were derived from a bi-exponential fit of the experimental relaxation decay induced by a 200-MHz NMR magnet. NMR relaxometry analysis revealed that 90% (0.9 primary ratio) of the protons in unaged asphalt binders exhibited a characteristic primary spin-lattice relaxation time (T1) of approximately 470ms. Results: Cold exposure did not significantly alter these parameters. Mimicked heat aging, which considered only temperature and duration, resulted in slight increases in both the primary relaxation time and ratio. In contrast, after 72h of UV exposure, binders showed variable T1 values at a significantly decreased primary ratio. This variability was summarized with the new performance parameter, the Herbaw. Further testing showed that standardized heat aging, which considered sample size and pressure, reduced both the primary relaxation time and ratio when compared to the mimicked aging. Conclusion: These results demonstrate that UV radiation induces significant structural changes in asphalt binder, which can be effectively detected using spin-lattice NMR relaxometry. The Herbaw performance parameter was successful in describing the variability of the UV aging which greatly impacted the primary ratio, indicating oxidative stress. The Herbaw Parameter was not as successful in describing heat aging since only slight changes in the primary relaxation time were detected. While the hydrogen environments were not significantly impacted, temperature-based aging may depend on multiple mechanisms.