Nanoparticles (NPs) are utilized for the functionalization of composite materials and nanofluids. Although oxide NPs (e.g., silica (SiO2)) exhibit less dispersibility in organic solvents or polymers due to their hydrophilic surface, the surface modification using silane coupling agents can improve their dispersibility in media with low dielectric constants. Herein, SiO2 NPs were functionalized using octyltriethoxysilane (OTES, C8) and dodecyltriethoxysilane (DTES, C12), wherein the degrees of surface modification of SiO2@C8 and SiO2@C12 were quantitatively evaluated based on the ratio of modifier to surface silanol group (θ) and the volume fraction of organic modifier to total particle volume (ϕR). The variations of surface properties were revealed by analyzing the Hansen solubility parameters (HSP). Particularly, the surface modification using OTES or DTES significantly affected the polarity (δP) of NPs. The local dielectric environments of surface-modified SiO2 NPs were characterized using a solvatochromic dye, Laurdan. By analyzing the peak position of the steady-state emission spectrum of Laurdan in a NP suspension, the apparent dielectric environments surrounding NPs (εapp) were obtained. A good correlation between ϕR and εapp was observed, indicating that ϕR is a reliable quantity for understanding the properties of surface-modified NPs. Furthermore, the generalized polarization (GP) of NPs was investigated. The surface-modified SiO2 NPs with higher ϕR (≥0.15) exhibited GP > 0, suggesting that the modifiers are well-organized on the surface of NPs. The localized dielectric environment surrounding NPs could be predicted by analyzing the volume fraction of nonpolar moieties derived from modifiers. Alternatively, εapp and GP can be utilized for understanding the properties of inorganic-organic hybrid NPs.
An external electric AC field with a field strength ranging from 10 V mm−1 to 30 V mm−1 and a frequency ranging from 0.1 kHz to 1 MHz was applied to suspensions of gold nanoparticles (Au NPs) to control their plasmonic properties. Apparent differences in the UV-vis spectra of the Au NPs were observed between the spectra with and without the field application. The characteristic red color of the Au NP suspension darkened; this suggested that the application of the AC field caused the aggregation of the Au NPs. In addition, the sizes of the Au NP clusters in suspension formed by the AC field application depended on the frequency of the applied field. The surface-enhanced Raman scattering (SERS) effects of Au NP clusters were examined by comparing the difference in Raman intensities obtained at 30 V mm−1 and in a frequency range of 0.1 kHz to 1 MHz. The application of a low-frequency field at 0.1 kHz caused a rapid aggregation of the Au NPs, resulting in low Raman intensities of the probe molecules. Conversely, high-frequency applications between 1 kHz and 1 MHz successfully enhanced the Raman intensities of the molecules in suspension. The strong correlation of the optical/sensing properties with the Au NP clustering states reveals that the application of an AC electric field is a powerful tool for control over the plasmonic properties.
Immobilization of photocatalysts on supports is an important method of adding highly active photocatalysts to a continuous flowing system without the need for photocatalyst recovery. However, direct immobilization prevents exposure to all photocatalytically active surfaces. Therefore, to immobilize particulate photocatalysts, while exposing the photocatalytic surface to organic pollutant water in a continuous flowing system, in this study, we employed double-inverse-opal (DIO) with periodically arranged, interconnected macropores, each containing a single photocatalytic particle. Increasing the macropore size successfully enhanced the decomposition rate of organic dye due to the high diffusion rate of dye molecules in the macropores of thin DIOs. However, an excessive increase in macropore size lowered the decomposition rate of dye molecules because an increase in DIO thickness caused the attenuation of light used to excite the photocatalytic particles. This study presents novel, immobilized photocatalytic DIO-structured particles that can be employed in continuous flowing reaction systems by tuning the photocatalytic particle size, macropore size, and DIO thickness.