The incorporation of pressure levels and pressure gradients in the design of compression stockings offers excellent potential to enhance function in the sport science, clinical research and rehabilitation fields. Yet, the connection of processing parameters and structure accompanying the pressure characteristic of current graduated compression stockings (GCS) is not well quantitatively studied. To bridge this knowledge gap, this study aims to analyze the effects of processing parameters, such as elastane yarn count, loop length and elastane feeding tension, on the structure and pressure behavior of GCS in our work. In addition, to investigate the mechanism of the pressure characteristic, two numerical models, the cylinder model and the conical model, are employed to predict the pressure value and the pressure gradient of stockings. The experimental results of the statistical analysis indicate that the loop length is a key factor to control the wale density, length of stockings and final pressure values. Moreover, the elastane feeding tension could affect the course density, girth of stockings and pressure gradient. On the other hand, the numerical results reveal that the conical model is suited for predicting the pressure values because of the change in radius of the limb in the model. The entire experimental and numerical work provide the mechanism for the study basis of processing, structure and pressure characteristics of GCS.
Different lower limbs and devices used for the contact pressure measurement of the compression stocking make a significant difference to the precise contact pressure value. This study aimed to fabricate a novel soft leg mannequin based on the standard-sized wooden leg mannequin, but closer to the human leg with soft tissue and bones and to evaluate further the performance of the fabricated leg mannequin. The contact pressure exerted by the graduated compression stocking was measured by the fabricated leg mannequin at four different locations along six different cross-sections. Comparing the contact pressure measured by the fabricated leg mannequin, the standard-sized wooden leg mannequin and human legs, the fabricated leg mannequin has a similar pattern to human legs, and contact pressure exerted by the wooden leg mannequin was far higher than that of human legs. In addition, the local contact pressure measured by the fabricated leg mannequin also has a remarkable agreement with that of human legs. Moreover, there was a significant Spearman rank correlation between the contact pressure measured by the fabricated leg mannequin and the human leg. Therefore, the performance of the fabricated leg mannequin can be consistent with the human leg, which enables the fabricated leg mannequin to replace the standard-sized wooden leg mannequin for standard tests.
8 August 2023 in International Journal of Clothing Science and Technology
Purpose: The purpose of this paper is to predict the effect of bra pad specifications on breast deformation during jumping using a finite element (FE) method. Breast deformation is a key concern for women during exercise and can be effectively controlled with sports bras. In most studies, the deformation of breasts when wearing a sports bra is measured using motion capture devices to judge their effectiveness. However, the operation of such devices is highly complex and time-consuming. Computer-aided technology is an efficient way to simulate these experiments.Design/methodology/approach: In this study, the breast model was obtained using three-dimensional (3D) scanning. Assembling models were obtained for FE analysis using reverse engineering and computer-aided design (CAD) software. The breast deformation results were obtained by completing pre-processing, solving and post-processing in the FE simulation software. To extend the application of these models, pads of different sizes and thicknesses within the bra were constructed to simulate the effect of pads on breast deformation.Findings: The calculated root mean square errors were <1%, which indicated good agreement between the FE and experimental data in all the models. Nipple deformation was always the largest in most models. The smallest deformation occurred at the superior position of breasts in all models. In addition, larger pads were not effective in reducing breast deformation; however, thicker pads were.Originality/value: The method developed in this study provides an effective way to predict breast deformation in multiple positions and is convenient for designing compression bras.
Asian women have smaller breast sizes and greater breast density, which suggests specific research on their breast kinematics and biomechanics. To investigate vertical breast displacement of Asian women among exercise modalities (rope skipping, walking, jogging, running) in different support conditions (wearing everyday bra or sports bra), and assess the motion between different parts of the breast, seven participants were selected to participate in this study. Five infrared markers were placed on each of their left breasts, and a three-dimensional motion capture system (NDI Optotrak Investigator) was used to collect the data on vertical breast displacement during walking (5 km/h), jogging (7.5 km/h), running (10 km/h) and rope skipping (2 Hz). No significant difference was found in the vertical displacement of different parts of the breast in the two bra conditions. Also, there was significant difference in vertical breast displacement among rope skipping, jogging and running. Breast size did not significantly affect its vertical displacement. The smaller, denser breast appears to reach a threshold of vertical displacement that is similar at high severities of dynamic exercises (jogging, running and rope skipping). The results might be useful for designing special sports bras for Asian women with small breasts or rope skipping participants to improve the shock absorption function.
13 March 2025 in International Journal of Clothing Science and Technology
Purpose: Sports bras can effectively reduce breast displacement, alleviate breast pain and protect the breast. Different bra components have different effects on breast support. This study aims to explore the quantitative relationship between bra components and vibration reduction function.Design/methodology/approach: To understand the effects of different bra component parameters on breast support, 30 sports bras were fabricated with precise component parameters. The dynamic vertical breast displacement when wearing each sports bra was monitored using motion capture technology. The breast displacement data from five breast positions was used to analyze the overall vertical displacement of the breast. To address variability due to differences in human anatomy, the experiments were conducted on a custom-made manikin prepared using three-dimensional printing.Findings: Compared with bare breasts, breasts supported by bras made with high-elastic-modulus cup materials, high-elastic-modulus shoulder strap materials and polyester underbands exhibited reduced vertical displacement during physical activity. Structurally, bras with higher cup heights, shorter strap lengths and smaller underband circumferences were associated with reduced overall breast displacement during physical activity.Originality/value: By systematically studying the effects of different bra components on breast support, this study provides valuable insight and recommendations for the design and materials selection of sports bras.
In order to investigate the effect of exercise modality and bra type on vertical breast displacement, seven participants with similar ages and body types were selected to take part in this study. Three-dimensional motion capture system (NDI Optotrak Certus) was used to collect the data of vertical breast displacement when participants were walking at the speed of 5 km/h, jogging at the speed of 7.5 km/h, running at the speed of 10 km/h on a treadmill, and rope skipping at the frequency of twice per second. It was found that there was no significant difference in vertical breast displacement between rope skipping, jogging and running. And the vertical breast displacement when wearing sports bra is significantly less than everyday bra in four exercise modalities. The results of this study might be useful for designing special sports bra for rope skipping modality.