5 January 2022 in Industrial & Engineering Chemistry Research
18 August 2022 in ACS Omega
Hydrophobic and breathable nanofiber membranes have attracted considerable attention owing to their applications in various fields. In this study, we fabricated superhydrophobic and breathable nanofiber membranes using solution blow spinning. We optimized the spinning process parameters by analyzing their effects on the structure and properties of the nanofiber membranes. And the nanofiber membranes achieved superhydrophobicity through hydrophobic modification treatment. The average fiber diameter and pore size of the obtained membrane were 0.51 and 13.65 μm, respectively. The membranes exhibited superhydrophobicity, breathability, and mechanical properties: water vapor transmission of 12.88 kg/m2/day, air permeability of 10.97 mm/s, water contact angle of 150.92°, maximum tensile stress of 5.36 MPa, and maximum elongation at break of 12.27%. Additionally, we studied the impact of heat treatment on the nanofiber membranes. The membranes prepared in this study can be applied to protective garments, outdoor clothing, antifouling materials, etc. Because of its relatively higher production efficiency, solution blow spinning is a prospective method for producing functional nanofibers.
8 June 2019 in Textile Research Journal
The incorporation of pressure levels and pressure gradients in the design of compression stockings offers excellent potential to enhance function in the sport science, clinical research and rehabilitation fields. Yet, the connection of processing parameters and structure accompanying the pressure characteristic of current graduated compression stockings (GCS) is not well quantitatively studied. To bridge this knowledge gap, this study aims to analyze the effects of processing parameters, such as elastane yarn count, loop length and elastane feeding tension, on the structure and pressure behavior of GCS in our work. In addition, to investigate the mechanism of the pressure characteristic, two numerical models, the cylinder model and the conical model, are employed to predict the pressure value and the pressure gradient of stockings. The experimental results of the statistical analysis indicate that the loop length is a key factor to control the wale density, length of stockings and final pressure values. Moreover, the elastane feeding tension could affect the course density, girth of stockings and pressure gradient. On the other hand, the numerical results reveal that the conical model is suited for predicting the pressure values because of the change in radius of the limb in the model. The entire experimental and numerical work provide the mechanism for the study basis of processing, structure and pressure characteristics of GCS.
26 April 2016 in Industrial & Engineering Chemistry Research
28 June 2018 in Industrial & Engineering Chemistry Research