Valeriy Volodin

Prof. Dr. Valeriy Volodin

orcid

Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 April 2017 in Russian Journal of Physical Chemistry A
Verified
Journal Article
Closed access
PDF file
VVValeriy Volodin
Valeriy Volodin
STSergey Trebukhov
Sergey Trebukhov
NBNurila Muratovna Burabaeva
Nurila Muratovna Burabaeva
ANAlina Vladimirovna Nitsenko
Alina Vladimirovna Nitsenko
The partial pressures of saturated vapor of the components in the Se–Te system are determined and presented in the form of temperature–concentration dependences from which the boundaries of the melt–gas phase transition are calculated at atmospheric pressure and vacuums of 2000 and 100 Pa. The existence of azeotropic mixtures is revealed. It is found that the points of inseparably boiling melts correspond to 7.5 at % of Se and 995°C at 101325 Pa, 10.9 at % at 673°C and 19.5 at % at 522°C in vacuums of 2000 and 100 Pa, respectively. A complete state diagram is constructed, including the fields of gas-liquid equilibria at atmospheric and low pressures, the boundaries of which allow us to assess the behavior of selenium and tellurium upon distillation fractionation.

1 October 2003 in JETP Letters
Verified
Journal Article
Closed access
PDF file
ATA. Zh. Tuleushev
A. Zh. Tuleushev
VVValeriy Volodin
Valeriy Volodin
YTYuriy Tuleushev
Yuriy Tuleushev
New niobium beryllide Nb3Be with A15 structure and lattice parameter a=0.5187±0.0007 nm, coexisting (3–5%) with a tetragonal phase, presumably, of an ordered solid solution with parameters a=0.5414±0.0008 nm and c=0.6378±0.0009 nm, was synthesized by thermal treatment (875–110°C) of amorphous film coatings containing 26.8–32.4 at. % Be and formed from short-period Nb and Be layers by magnetron sputtering. The domain of existence of the Nb3Be phase and the critical superconducting transition temperature (10.0 K and a transition width of 2.5 K) were determined and the X-ray structural data for structure identification were obtained.

9 March 2018 in Russian Journal of Physical Chemistry A
Verified
Journal Article
Closed access
PDF file
VVValeriy Volodin
Valeriy Volodin
STSergey Trebukhov
Sergey Trebukhov
BKBagdaulet Kenzhalievich Kenzhaliyev
Bagdaulet Kenzhalievich Kenzhaliyev
ANAlina Vladimirovna Nitsenko
Alina Vladimirovna Nitsenko
NBNurila Muratovna Burabaeva
Nurila Muratovna Burabaeva
The values of partial pressure of saturated vapor of the constituents of the Те–S system are determined from boiling points. The boundaries of the melt–vapor phase transition at atmospheric pressure...

20 April 2022 in Metals
Verified
Journal Article
Open access
PDF file
STSergey Trebukhov
Sergey Trebukhov
VVValeriy Volodin
Valeriy Volodin
ANAlina Vladimirovna Nitsenko
Alina Vladimirovna Nitsenko
NBNurila Muratovna Burabaeva
Nurila Muratovna Burabaeva
GRGaliya Ruzakhunova
Galiya Ruzakhunova
The heterogeneity and local distribution of elements are established as a result of the study of nonferrous metals distribution and the composition of domestic wastes processing concentrate containing 20–40% copper, 40–50% brass, 20–28% zinc and up to 1% aluminium. Metals are mainly concentrated in granules of three types: zinc-based, copper-based and copper–zinc alloy, i.e., brass. The phase composition of these granule types and their structure are determined. Zinc granules are covered with a refractory oxide shell. A distillation processing method for such raw materials based on full state diagrams, including the phase transition of melting pairs of double systems of copper and tin with zinc and lead, is offered. The possibility of a rather complete zinc distillation (over 90%) with the accumulation of other metals in the copper-based alloy, containing more than 96 wt. % of the basic element, has been demonstrated by electric crucible melting in a highly reducing atmosphere. Copper-based alloys, after adjustment for the content of some metals (tin), can be realized as pressure-treated tin bronzes. Copper with the content of impurities corresponding to the standard for blister copper can be electrolytically processed (after dissolution in sulphuric acid) in copper production. Equipment for the implementation of the electro-thermal processing process that provides metal recycling of the metal concentrate is proposed.

25 May 2013 in Physics of Metals and Metallography
Verified
Journal Article
Closed access
PDF file
VVValeriy Volodin
Valeriy Volodin
YTYu. Zh. Teleushev
Yu. Zh. Teleushev
EZE. A. Zhakanbaev
E. A. Zhakanbaev
Using the methods of ion-plasma sputtering and the coprecipitation of ultradispersed Nb and C particles, samples of Nb-C coatings have been obtained in the range of carbon concentrations of 1.9–56.6 at %. The structural analysis supports the existence of metastable solid solutions below 1.9 at % C, the direct synthesis of Nb2C in the range of 1.9–8.5 at % C, the presence of an amorphous phase between 8.5 and 41.7 at % C, and the direct synthesis of NbC in the range of 41.7–56.6 at % C. Thermal treatment below 900°C leads to a considerable widening of concentration intervals of Nb2C and NbC existence and the intervals of coexistence of these phases with other phases. The field of NbC carbide extends from 41.7 to 56.6 at %. At a concentration above 50 at % C, the carbon phase in the coating is not revealed, which is probably caused by difficulties detecting it via X-ray diffraction method. Upon cryogenic tests, a change in the polarity of conductivity from metallic to semiconductor type upon an increase in the carbon concentration has been demonstrated. The possibility of applying the technique of material formation using small particles for other systems has been mentioned.

1 June 2015 in Technical Physics Letters
Verified
Journal Article
Closed access
PDF file
VVValeriy Volodin
Valeriy Volodin
YTYuriy Tuleushev
Yuriy Tuleushev
BSB. M. Sukurov
B. M. Sukurov
Whiskers crystals were discovered in the tantalum–cadmium (56.6 at % Cd) solid solutions formed by in-turn deposition of the superfine tantalum and cadmium particles sputtered in low-pressure plasma on a moving substrate. The SEM studies have revealed whiskers crystals with a density of 2 per cm2. It was hypothesized assumption that formation may occur of whiskers crystals in the film.