Jeong Min Park

Dr. Jeong Min Park

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 August 2024 in Nanomaterials
Verified
Journal Article
Open access
PDF file
SKSu Jin Kim
Su Jin Kim
SHSeungkwon Hwang
Seungkwon Hwang
JKJung-Dae Kwon
Jung-Dae Kwon
JYJongwon Yoon
Jongwon Yoon
JPJeong Min Park
Jeong Min Park
CKChang Goo Kang
Chang Goo Kang
The impact of radiation on MoS2-based devices is an important factor in the utilization of two-dimensional semiconductor-based technology in radiation-sensitive environments. In this study, the effects of gamma irradiation on the electrical variations in MoS2 field-effect transistors with buried local back-gate structures were investigated, and their related effects on Al2O3 gate dielectrics and MoS2/Al2O3 interfaces were also analyzed. The transfer and output characteristics were analyzed before and after irradiation. The current levels decreased by 15.7% under an exposure of 3 kGy. Additionally, positive shifts in the threshold voltages of 0.50, 0.99, and 1.15 V were observed under irradiations of 1, 2, and 3 kGy, respectively, compared to the non-irradiated devices. This behavior is attributable to the comprehensive effects of hole accumulation in the Al2O3 dielectric interface near the MoS2 side and the formation of electron trapping sites at the interface, which increased the electron tunneling at the MoS2 channel/dielectric interface.

1 October 2022 in Materials Research Express
Verified
Journal Article
Open access
HCHyojeong Choi
Hyojeong Choi
JPJeong Min Park
Jeong Min Park
JCJong-Seo Chai
Jong-Seo Chai
CdZnTe is a promising material for room-temperature radiation semiconductor detectors. However, their radiation response performance might be deteriorated owing to defects within the material such as Te inclusions. This study employs the Cd thermal annealing process to reduce the size of these Te inclusions. An ampoule containing Cd powder and CdZnTe was sealed under the vacuum conditions of 2.5 × 10−5 Torr for Cd-vapor annealing. Subsequently, the ampoule was annealed at 783 K for 64 h. An IR camera was used to observe the distribution of Te inclusions in the CdZnTe before and after annealing. As a second experiment, NH4F + H2O2 passivation was performed to suppress the increased leakage current due to Cd-vapor annealing. Then an 241Am radioisotope source was used to obtain a radiation response spectrum. The improved charge collection efficiency was about 35%.

1 July 2026 in Optical Materials
Verified
Journal Article
Closed access
JJJin Jegal
Jin Jegal
HKHongjoo Kim
Hongjoo Kim
JPJeong Min Park
Jeong Min Park
HPHyeoungWoo Park
HyeoungWoo Park

12 June 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
JPJeong Min Park
Jeong Min Park
YLYongsu Lee
Yongsu Lee
SKSu Jin Kim
Su Jin Kim
GCGeon-Ju Choi
Geon-Ju Choi
CLChang-Xu Li
Chang-Xu Li
CKChang Goo Kang
Chang Goo Kang
Flexible X-ray sensors are of increasing interest for applications on curved or mechanically constrained surfaces; however, their practical implementation requires the integration of an X-ray conversion layer, a multichannel readout structure, and mechanically stable packaging within a single device platform. In this study, a flexible 64-channel indirect X-ray imaging sensor was developed by integrating a CsPbBr3–PVDF nanocomposite scintillator film with a silicon photodiode array fabricated on a polyimide-based flexible printed circuit board. The aim of this study was not to present a scintillator material report alone, but to validate a mechanically compliant multichannel X-ray sensing architecture. The fabricated array exhibited a dark current below 10 nA at a reverse bias of 10 V. After 1,000 bending cycles with a 10 mm displacement, the measured electrical variation remained below 5%, indicating stable operation under repeated mechanical deformation. Under X-ray irradiation, slit-type lead phantom measurements produced distinguishable multichannel response patterns, with contrast-to-noise ratios of 8.4–8.5 at 50–60 kV and 25 mA. Square-phantom measurements yielded a representative image signal-to-noise ratio of 2.54 and a uniformity metric of 22.97%. Open-beam measurements without a slit phantom showed an approximately linear dose-response behavior above 2.66 mGy, with an R² value of 0.9942. These results support the feasibility of the proposed scintillator-photodiode configuration as a proof-of-concept flexible multichannel X-ray sensing and imaging platform.

7 November 2024 in Optical Materials
Verified
Journal Article
Open access
JPJeong Min Park
Jeong Min Park
CKChang Goo Kang
Chang Goo Kang
SKS.J. Kim
S.J. Kim
Hong Joo KimHong Joo Kim
Hong Joo Kim
SSSudipta Saha
Sudipta Saha