Metal-oxide thin-film semiconductors have been highlighted as next-generation space semiconductors owing to their excellent radiation hardness based on their dimensional advantages of very low thickness and insensitivity to crystal structure. However, thin-film transistors (TFTs) do not exhibit intrinsic radiation hardness owing to the chemical reactions at the interface exposed to ambient air. In this study, significantly enhanced radiation hardness of Al2O3-passivated ZnO TFTs against high-energy protons with energies of up to 100 MeV is obtained owing to the passivation layer blocking interactions with external reactants, thereby maintaining the chemical stability of the thin-film semiconductor. These results highlight the potential of passivated metal-oxide thin films for developing reliable radiation-hardened semiconductor devices that can be used in harsh space environments. In addition, the relationship between low-frequency noise and defects due to oxygen vacancies was revealed, which can be utilized to improve device reliability.
The impact of radiation on MoS2-based devices is an important factor in the utilization of two-dimensional semiconductor-based technology in radiation-sensitive environments. In this study, the effects of gamma irradiation on the electrical variations in MoS2 field-effect transistors with buried local back-gate structures were investigated, and their related effects on Al2O3 gate dielectrics and MoS2/Al2O3 interfaces were also analyzed. The transfer and output characteristics were analyzed before and after irradiation. The current levels decreased by 15.7% under an exposure of 3 kGy. Additionally, positive shifts in the threshold voltages of 0.50, 0.99, and 1.15 V were observed under irradiations of 1, 2, and 3 kGy, respectively, compared to the non-irradiated devices. This behavior is attributable to the comprehensive effects of hole accumulation in the Al2O3 dielectric interface near the MoS2 side and the formation of electron trapping sites at the interface, which increased the electron tunneling at the MoS2 channel/dielectric interface.
15 November 2020 in Journal of the Korean Physical Society
Current combined X-ray and neutron radiation imaging equipment comprises two separate radiation generators and two imaging systems and uses a single-side silicon photodetector for radiation detection. If two radiation generators and two imaging modules are merged into one generator and one imaging system, a cost-efficient and lightweight portable multi-radiation security inspection system can be developed. This study describes the development and feasibility test of a double-sided silicon-photodetector-based X-ray and neutron simultaneous X-ray and neutron detecting radiation sensor module for an X-ray and neutron merged imaging system. The feasibility of this developed radiation sensor module was confirmed using X-ray transmission and a 14-MeV neutron irradiation test. Our results confirm the successful combination of two radiation generators and two imaging modules into one generator and one imaging system, which can help in implementing a cost-efficient and lightweight portable multi-radiation security inspection.
As space missions expand in duration and complexity, ensuring the intrinsic reliability of electronics against harsh heavy-ion irradiation remains a critical challenge. Here we show that phase-composite zinc oxide topology, which embeds nanocrystals within an amorphous matrix, exhibits exceptional radiation hardness compared to conventional polycrystalline devices. Under high-linear-energy-transfer irradiation (72.3 MeV·cm 2 /mg[silicon]), passivated devices with rigid polycrystalline structure suffer severe electrical degradation (26.3–46.4%) in on-current, field-effect mobility, and subthreshold swing, alongside a 31-fold increase in flicker noise spectral density. Conversely, passivated devices with flexible phase-composite crystallinity maintain remarkable stability with minimal variations (2.1–8.2%) in electrical parameters, while preserving consistent carrier-number fluctuation noise behavior. Structural analyses and concurrent electrical improvements reveal that heavy-ion irradiation induces a net increase in lattice bonds within the phase-composite topology, facilitating spontaneous, radiation-assisted self-annealing. Simultaneously, distributed nanocrystals provide alternative conduction pathways that bypass local irradiation-induced defects. Ultimately, this structural synergy establishes a fundamental crystallinity-dependent design strategy for developing robust radiation-hardened electronics.