The Forschungs-Neutronenquelle Heinz Meier-Leibnitz (FRM II) is actively participating in the worldwide efforts on developing high-density uranium fuels in order to reduce the enrichment of fuels used in high flux research reactors. This work is part of a parameter study to define possible compatible FRM II core designs for conversion. As a first step, a code-to-code verification is performed and experimental data is used for validation. The Gambill experiment was performed in the early 1960’s in support of the HFIR program and provides results regarding the heat transfer coefficient and friction factors of water flowing through an electrically heated thin rectangular channel. A comparison is made between the Gambill Test and the results simulated by Ansys CFX and STAR-CCM+.
The ongoing efforts to convert High-Performance Research Reactors (HPRRs) using Highly Enriched Uranium (HEU) to Low-Enriched Uranium (LEU) fuel require reliable thermal–hydraulic assessments of modified core designs. The involute-shaped fuel plates used in several major HPRRs present unique modeling challenges due to their compact core geometries and high heat flux conditions. This study evaluates the capability of three commercial CFD tools, STAR-CCM+, COMSOL, and ANSYS CFX, to predict cladding-to-coolant heat transfer using Reynolds-Averaged Navier–Stokes (RANS) methods within the thermal–hydraulic regimes of involute-shaped plate reactors. Broad sensitivity analysis was conducted across a range of reactor-relevant parameters using two turbulence models ( and SST) and different near-wall treatment strategies. The results were benchmarked against the Sieder–Tate correlation and experimental data from historic studies. The codes produced consistent results, showing good agreement with the empirical correlation of Sieder–Tate and the experimental measurements. The findings support the use of these commercial CFD codes as effective tools for assessing the thermal–hydraulic performance of involute-shaped plate HPRRs and guide future LEU core development.
The McMaster nuclear reactor (MNR) is an important research facility that not only provides researchers with neutrons for fundamental science, but also supplies the medical industry with isotopes used for cancer treatment. To ensure the safety and performance of the MNR, modeling of the thermal hydraulics during nominal and accidental conditions is required. For such a task, system codes are customarily used. While system codes can assess the safety aspects of complex thermal–hydraulic systems, the question arises whether such systems can be modeled appropriately in a three-dimensional manner, such as computation fluid dynamics (CFD), while capturing the thermal mixing of the coolant. Modeling the thermal hydraulics of nuclear research reactors using CFD is relatively new. Therefore, validating such methods against experimental data is of utmost importance. The validation of CFD is the main focus of this work. More specifically, the influence of the loss of heat sink on the pool temperature is assessed using the CFD code Ansys CFX. The validation basis was provided by an experiment performed at the MNR in March 2023. In this experiment, the secondary heat removal system was intentionally shut down, and the pool temperature was measured in a few positions. The results obtained by modeling the loss of heat sink in the MNR using Ansys CFX agree well with the experiment.
26 February 2025 in Nuclear Science and Engineering