Prashant K Jain

Dr. Prashant K Jain


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
BABrian Ade
Brian Ade
BBBenjamin R Betzler
Benjamin R Betzler
AWAaron J. Wysocki
Aaron J. Wysocki
MGMichael S. Greenwood
Michael S. Greenwood
PCPhillip C. Chesser
Phillip C. Chesser
RKRobert F. Kile
Robert F. Kile
Early cycle activities under the Transformational Challenge Reactor (TCR) program focused on analyzing and maturing four reactor core design concepts: two fast-spectrum systems and two thermal-spectrum systems. A rapid, iterative approach has been implemented through which designs can be modified and analyzed and subcomponents can be manufactured in parallel over time frames of weeks rather than months or years. To meet key program initiatives (e.g., timeline, material use), several constraints—including fissile material availability (less than 250 kg of HALEU), component availabilities, materials compatibility, and additive manufacturing capabilities—were factored into the design effort, yielding small (less than one cubic meter in volume) cores with near-term viability. The fast-spectrum designs did not meet the fissile material constraint, so the thermal-spectrum systems became the primary design focus. Since significant progress has been made on advanced moderator materials (YHx) under the TCR program, gas-cooled thermal-spectrum systems using less than 250 kg of HALEU that occupy less than 1 m3 are now feasible. The designs for two of these systems have been evolved and matured. In both thermal-spectrum design concepts, bidirectional coolant flow is used. Coolant flows down through YHx moderator elements and is reversed in a bottom manifold and core support structure, and then flows up though or around the fuel elements. The main difference between the two thermal-spectrum design concepts is the fuel elements—one uses traditional UO2 ceramic fuel, and the other uses UN-bearing TRISO fuel particles embedded inside a SiC matrix. Core neutronics and thermal performance for these systems are assessed and summarized herein.

4 May 2023 in Nuclear Engineering and Design
Verified
Journal Article
Closed access
MSMarta Sitek
Marta Sitek
KSKaltrina Shehu
Kaltrina Shehu
Prashant K JainPrashant K Jain
Prashant K Jain
ABAurélien Bergeron
Aurélien Bergeron
JLJeremy Licht
Jeremy Licht
CRChristian Reiter
Christian Reiter

31 January 2025 in Atmosphere
Verified
Journal Article
Open access
PDF file
YSYadukrishnan Sasikumar
Yadukrishnan Sasikumar
VKVineet Kumar
Vineet Kumar
RMRosemary Ann Montgomery
Rosemary Ann Montgomery
Prashant K JainPrashant K Jain
Prashant K Jain
Oak Ridge National Laboratory is collecting and characterizing aerosols released when spent nuclear fuel (SNF) rods are fractured in bending. An aerosol collection system was designed and tested to collect respirable sized (<10 μm aerodynamic diameter [AED]) particulates inside a hot cell facility. The setup is a modified version of the commercially available Sioutas cascade impactor, to which additional stages were added to expand the aerosol collection range from 2.5 to ~15 μm AED. To accommodate the additional stages and specific test conditions, the operating flow rate for aerosol collection was reduced, and testing was conducted by using pressure drop measurements, surrogate dust collection, and particle size characterization. The fluid flow distribution within the cascade and its stages was simulated in STAR-CCM+, and the stage-wise pressure drops obtained using the computational fluid dynamics model were then compared to experimental data. Lagrangian particle simulations were also performed, and stage-wise collection statistics were obtained from the simulation for comparison with the experimental data obtained using SNF-surrogate dust particles. The results provide valuable insights into the stage-wise particle collection characteristics of the modified cascade impactor and can also be used to improve the prediction accuracy of the manufacturer-determined analytical correlations.

1 January 2019 in Journal of Nuclear Engineering and Radiation Science
Verified
Journal Article
Closed access
PDF file
CHChristopher J. Hurt
Christopher J. Hurt
JFJames D. Freels
James D. Freels
Prashant K JainPrashant K Jain
Prashant K Jain
GMG. Ivan Maldonado
G. Ivan Maldonado
Safety analyses at the high flux isotope reactor (HFIR) are required to qualify experiment targets for the production of plutonium-238 (238Pu) from neptunium dioxide/aluminum cermet (NpO2/Al) pellets. High heat generation rates (HGRs) due to fissile material and low melting temperatures require a sophisticated set of steady-state thermal simulations in order to ensure sufficient safety margins. These simulations are achieved in a fully coupled thermo-mechanical analysis using comsol multiphysics for four different preliminary target designs using an evolving set of pre- and postirradiation data inputs, and subsequently evolving solution scopes, from the unique pellet and target designs. A new comprehensive presentation of these preliminary analyses is given and revisited analyses of the first prototypical target designs are presented to reveal the effectiveness of evolving methods and input data.

16 July 2021
Verified
Preprint
Open access
MDMarc Olivier Delchini
Marc Olivier Delchini
VRVivek Rao
Vivek Rao
MAMohammad T. H. Bani Ahmad
Mohammad T. H. Bani Ahmad
Prashant K JainPrashant K Jain
Prashant K Jain
US manufacturing industry fails to recover an estimated 900 trillion BTU of low-temperature waste heat from its processes each year. A grand research challenge has been to develop technology that can be applied to recovery of waste heat from industrial manufacturing processes and vehicle operations. The Oak Ridge National Laboratory (ORNL)/Eaton research team is performing