Bárbara Bulhões Cazula

Dr. Bárbara Bulhões Cazula


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 August 2024 in Processes
Verified
Journal Article
Open access
PDF file
LOLígia Gomes Oliveira
Lígia Gomes Oliveira
CNCleuciane Tillvitz Do Nascimento
Cleuciane Tillvitz Do Nascimento
BCBárbara Bulhões Cazula
Bárbara Bulhões Cazula
ATAnabelle Tait
Anabelle Tait
COCarlos de Jesus de Oliveira
Carlos de Jesus de Oliveira
HAHelton José Alves
Helton José Alves
Among the countless routes for renewable hydrogen (H2) production, Biogas Dry Reforming (DR) has been highlighted as one of the most promising for the circular bio-economy sector. However, DR requires high operating temperatures (700 °C–900 °C), and, for greater efficiency, a thermally stable catalyst is necessary, being, above all, resistant to coke formation, sintering, and sulfur poisoning. Mesoporous metallic catalysts, such as nickel (Ni) supported on silica, stand out due to their high catalytic activity concerning such characteristics. In this regard, the presented work evaluated the influences of the nickel addition stage during the synthesis of mesoporous catalyst type Si-MCM-41. Two different catalysts were prepared: catalyst A (Ni/Si-MCM-41_A), synthesized through the in situ addition of the precursor salt of nickel (Ni(Ni(NO3)2·6H2O) before the addition of TEOS (Tetraethyl orthosilicate) and after the addition of the directing agent; and catalyst B (Ni/Si-MCM-41_B), resulting from the addition of the precursor salt after the TEOS, following the conventional methodology, by wet impregnation in situ. The results evidenced that the metal addition stage has a direct influence on the mesoporous structure. However, no significant influence was observed on the efficiency concerning BDR, and the conversions into H2 were 97% and 96% for the Ni/SiMCM-41_A and Ni/Si-MCM-41_B catalysts, respectively.

1 January 2020 in Journal of the Brazilian Chemical Society
Verified
Journal Article
Open access
BCBárbara Bulhões Cazula
Bárbara Bulhões Cazula
EMEduardo Meurer
Eduardo Meurer
AFAlan Fortes
Alan Fortes
ATAngelica Tonin
Angelica Tonin
LGLázaro Gasparrini
Lázaro Gasparrini
HAHelton Alves
Helton Alves

1 January 2024 in Journal of the Brazilian Chemical Society
Verified
Journal Article
Closed access
BCBárbara Bulhões Cazula
Bárbara Bulhões Cazula
RFRenata da Fonseca
Renata da Fonseca
AMAndré Luiz Marinho
André Luiz Marinho
FNFábio Noronha
Fábio Noronha
PAPedro Augusto Arroyo
Pedro Augusto Arroyo
HAHelton José Alves
Helton José Alves
The present work carried out an extensive and deepened study regarding the physicochemical characteristics of two Si-MCM-41-type supports, synthesized employing two distinct silica precursors, tetraethyl orthosilicate (TEOS) and rice husk ash (RHS), with the dispersion of nickel on the surface of the catalytic support. The direct influence of the active phase dispersion was analyzed, making a relationship with the formation of coke and with its performance on methane dry reform (DRM). The catalysts were prepared with 5, 10, and 20% (m/m) of Ni by wet impregnation method (with excess solvent), calcined at 800 ºC for 6 h, and characterized by the techniques of scanning electron microscopy and energy dispersive spectroscopy (SEM/ EDS), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET)/Barret-JoyerHalenda (BJH), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), temperature-programmed ammonia desorption (TPD-NH3), and H2-temperature-programmed reduction (TPR). The DRM experiments were carried out at 800 °C for 24 h with a 1:1 CH4:CO2 molar ratio. Analyzes of gaseous products were performed in gas chromatography (GC) and the coke produced was estimated by temperature-programmed oxidation (TPO). The best reaction results were obtained for catalysts with 20% nickel, which were selective and stable within 24 h of reaction. Comparing the TEOS and RHS catalysts for 20% Ni, the DRM results were very similar. The catalysts on RHS support demonstrated a significant low formation of coke, which can be considered negligible in a 24 h reaction.

1 January 2021 in Matéria (Rio de Janeiro)
Verified
Journal Article
Open access
BCBárbara Bulhões Cazula
Bárbara Bulhões Cazula
RFRenata Oliveira Da Fonseca
Renata Oliveira Da Fonseca
FNFabio Bellot Noronha
Fabio Bellot Noronha
HAHelton José Alves
Helton José Alves
RESUMO O hidrogênio é um produto de grande apelo industrial, ainda mais quando proveniente de uma cadeia renovável de baixo impacto ambiental. Visando a redução de custos relacionados ao preparo dos catalisadores utilizados para a obtenção de H2, o presente trabalho teve como objetivo avaliar a influência de dois diferentes suportes de Si-MCM-41, sintetizados a partir de duas diferentes fontes de sílica (uma comercial, ortossilicato de tetraetila – TEOS e outra residual, sílica de cinzas de casca de arroz – CCA), no desempenho de catalisadores de níquel quando aplicados na reação de reforma a seco do metano (RS). Os catalisadores foram sintetizados com 20% (m/m) de níquel por meio de impregnação úmida e foram caracterizados pelas técnicas de MEV/EDS, fisissorção de N2, DRX, FTIR, TPD–NH3 e TPR. Os ensaios reacionais foram conduzidos em reator de leito fixo, a 800 ºC por 24 h. Os resultados de caracterização do material evidenciaram que a síntese catalisadores foi eficiente. Os catalisadores apresentaram significativas diferenças estruturais se tratando das diferentes fontes de sílica utilizadas na síntese do suporte catalítico, diferenças essas que foram mais evidentes na área específica e no diâmetro de poros dos materiais. Essa diferença pode estar relacionada com a diferença morfológica do suporte catalítico que influencia diretamente na maneira com a qual a fase ativa ficará disposta na superfície do catalisador. A avaliação dos produtos gasosos, realizada por cromatografia gasosa, evidenciou resultados de conversão e seletividade muito semelhantes para os dois catalisadores, levando a conversões de 45% de H2. A formação de coque no catalisador no qual o suporte precursor foi sintetizado a partir de CCA foi significativamente menor. Nesse sentido, a CCA se destaca como um promissor substituinte para o TEOS na síntese de suportes catalíticos para catalisadores de níquel de alta performance quando aplicados na RS.