Design documentation proved to be insufficient in determining the areas of sheet metal element unfolds as well as that of machines and equipment with a predominant number of sheet metal elements. Therefore, the present study proposes an approach for determining the percentage of technological waste which can be used to increase the amount of sheet material needed in the machine detail manufacturing. Using the AutoCAD product operational characteristics, it is possible to significantly reduce a large percentage of technological waste.
The dynamic characteristics of flexible couplings with a rubber–metal element type SEGME have been studied. The hardness of the rubber element of the SEGME 25 coupling is 53 Shore A, and that the SEGME 63 coupling is 73 Shore A, respectively. The experimental study was carried out in conditions of alignment of the connected shafts, and also at different levels of radial misalignment. The influence of an additional angular misalignment was investigated. The results show that, for this coupling type, the radial misalignments induce a downward nonlinear dependence on the dynamic stiffness. The presence of a small angular displacement in the shafts causes significant radial deformations. The sensitivity of the coupling decreases with the high hardness of the rubber element.
A Mullins simulation was conducted to analyze the effects of loading and unloading of a flexible-type SEGE coupling with a nominal torque of and maximum torque of . The coupling’s properties were determined by examining its moment characteristics at . The correlation between the Mullins effect results obtained from the SEGE coupling load simulation via SolidWorks 2022 software and the actual experimental data was examined.
Preserving and restoring architectural monuments of symbolic national significance stand as an unequivocal priority for both local and state authorities. Indeed, with advancements in the technology, materials, and methods of work, there are some specific stages involved in the process of restoring historical buildings; however, maintaining their authentic form and impact poses a serious challenge, necessitating the development of innovative, non-standard technologies and the adaptation of a multifunctional methodology to achieve the desired outcome. The present study focuses on the restoration of the roof covering of the historical building of the “Dormition of the Mother of God” Cathedral in Varna, in terms of technological feasibility and cost-effectiveness. Proposed in this paper is a solution that strives to restore the magnificent roof in adherence to the heritage conservation principles by applying a genuine gold coating instead of retaining the previous dull goldish coating made from alkyd paint, yellow pigment, and gold dust. Through the implementation of descriptive geometry techniques and AutoCAD, followed by verification using Inventor, the study presents a feasible solution for accurately determining the surface area of the domes to be gilded.
The possibility of measuring physical parameters of agricultural crops using a small unmanned aerial vehicle (UAV) is discussed in the material. A 3D model was created from which the dimensions taken were compared with those measured from the experimental field. The results were compared with linear regression analysis, and it was obtained for Multiple R 99.9% and R Square is 99.9%, which proves the applicability of the method.
The present work examines the possibility of measuring the amount of biomass by determining the density of the crop with an ultrasonic sensor. Due to the high speed of the sound waves, it is possible to carry out the measurement with a high speed of passage. The result is compared with a field measurement of the density of the stems of winter wheat. The linear regression analysis obtained $\mathbf{R}=0.999$ and $\mathbf{R } \text{Square }= 0.999$. This indicates 100% accuracy of the result.