Cumbersome high-power joint actuators are not suitable for lightweight cooperative manipulators, which require flexibility and high energy efficiency while maintaining moderate payload capacity. Thus, gravity compensation is proposed in this work to drive cooperative manipulators by small joint actuators. Most existing gravity compensation methods are focused on fixed load (i.e. dead-weight), while in this study, a variable-payload balanced 6-DoF (degrees of freedom) serial manipulator is realized by adaptive gravity-balancing mechanism. Since joint actuators can be small enough to withstand only joint friction and inertia, this manipulator is inherently safe for man-robot interaction. The adaptive gravity-balancing mechanism is composed of ZFL (zero-free length) springs with adjustable endpoints, which are actively adjusted by cable after payload changes. Three advantages of the proposed manipulator include: Firstly, balancing all joints affected by gravity by only one additional balancing motor; Secondly, the balancing mechanism can actively adapt to variable payloads; Finally, the adjustment of the balancing mechanism is independent of the manipulator’s pose. Through simulation, these three advantages have been verified, which provides a new scheme for the design of safe-interaction and energy-saving cooperative manipulators.
Legged soccer robots present a significant challenge in robotics owing to the need for seamless integration of perception, manipulation, and dynamic movement. While existing models often depend on external perception or static techniques, our study aims to develop a robot with dynamic and untethered capabilities. We have introduced a motion planner that allows the robot to excel in dynamic shooting and dribbling. Initially, it identifies and predicts the position of the ball using a rolling model. The robot then pursues the ball, using a novel optimization-based cycle planner, continuously adjusting its gait cycle. This enables the robot to kick without stopping its forward motion near the ball. Each leg is assigned a specific role (stance, swing, pre-kick, or kick), as determined by a gait scheduler. Different leg controllers were used for tailored tiptoe trajectory planning and control. We validated our approach using real-world penalty shot experiments (5 out of 12 successful), cycle adjustment tests (11 out of 12 successful), and dynamic dribbling assessments. The results demonstrate that legged robots can overcome onboard capability limitations and achieve dynamic mobility and manipulation.
21 January 2025 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Accurate perception of a legged robot’s body states is crucial for effective motion control. However, certain states of the system cannot be directly measured, necessitating their estimation by combining available sensor data. Both methods of valuing or neglecting the interaction between the legs and the ground have achieved significant success, but it seems that these methods lack attention to absolute position and yaw. In this study, a novel multi-sensor fusion approach for legged robots is proposed, addressing the deficiency by combining Ultra Wide Band (UWB) technology, Inertial Measurement Unit (IMU) data, and leg kinematics data. These measurement data are injected into an Error State Kalman Filter (ESKF) to achieve unbiased state estimation. The proposed approach is validated through experiments, demonstrating its effectiveness in long-term, long-distance, and uneven terrain scenarios. The contributions of this study include full dimensional unbiased estimation, a modeling approach in prediction and update steps that enhances efficiency, theoretical confirmation through observability analysis, and its application on a hexapod robot in real-world scenarios. This research provides a viable solution to the global localization problem of legged robots, paving the way for the development of intelligent and stable legged robots in the future.