The equation of state (EOS) for detonation products can predict explosive performance with basic information about density, enthalpy of formation, and elemental composition. However, to achieve higher prediction accuracy, it is necessary to select an appropriate EOS for the specific detonation parameters being calculated. To study the applicability of different equations of states for explosive products, five EOSs, Becker–Kistiakowsky–Wilson, Kihara–Hikita–Tanaka, Virial-Wu (VLW), Lennard-Jones–Devonshire (LJD), and Jacobs–Cowperthwaite–Zwisler (JCZ), were used to calculate the Hugoniot curve of nitrogen and the detonation performance of typical explosives. The calculation results show that all five EOSs can provide reasonably accurate predictions of the Hugoniot curve of nitrogen on the relative volume-pressure plane. Moreover, the EOSs can accurately predict the detonation velocity and pressure of explosives within a wide range of initial densities. When it comes to temperature calculations, LJD and JCZ demonstrate higher prediction accuracy. Additionally, the results indicate that VLW may not be suitable for calculating the overdriven detonation of explosives, particularly at higher pressures.
The development of Pickering interfacial catalysts for organic reactions in water is of great importance to the development of green chemistry. In this study, amphiphilic hydrochar was prepared by a simple urea-modified hydrothermal carbonization with cellulose as an environmentally benign carbon source. It was found that the addition of urea could not only promote the carbonization of cellulose but also introduce N atoms to the final hydrochar material and tune the amphiphilicity of the hydrochar. Palladium nanoparticles supported on the amphiphilic N-doped hydrochar exhibited high activity in the Suzuki reaction in aqueous media. It can be seen that amphiphilic hydrochar can effectively stabilize Pickering emulsion, increase interface surface area, and further accelerate the Suzuki reaction.
A novel N, F-co-doped bio-carbon material derived from cellulose was successfully developed via a convenient and simple strategy. The obtained bio-carbon material was characterized with various techniques. It is found that the addition of N, F precursors can benefit the formation of porous structure in bio-carbon during thermal pyrolysis and N, F dopants have significant effect on electronic structure of native carbon atoms, which could regulate the adsorption property and catalytic activity of obtained bio-carbon material. Furthermore, Pd NPs supported on the N, F-co-doped bio-carbon showed excellent catalytic activity and selectivity toward the aerobic oxidation of biomass-derived 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid in aqueous media under mild conditions. N, F dopants on bio-carbon material played an important role in the oxidation reaction.