The equation of state (EOS) for detonation products can predict explosive performance with basic information about density, enthalpy of formation, and elemental composition. However, to achieve higher prediction accuracy, it is necessary to select an appropriate EOS for the specific detonation parameters being calculated. To study the applicability of different equations of states for explosive products, five EOSs, Becker–Kistiakowsky–Wilson, Kihara–Hikita–Tanaka, Virial-Wu (VLW), Lennard-Jones–Devonshire (LJD), and Jacobs–Cowperthwaite–Zwisler (JCZ), were used to calculate the Hugoniot curve of nitrogen and the detonation performance of typical explosives. The calculation results show that all five EOSs can provide reasonably accurate predictions of the Hugoniot curve of nitrogen on the relative volume-pressure plane. Moreover, the EOSs can accurately predict the detonation velocity and pressure of explosives within a wide range of initial densities. When it comes to temperature calculations, LJD and JCZ demonstrate higher prediction accuracy. Additionally, the results indicate that VLW may not be suitable for calculating the overdriven detonation of explosives, particularly at higher pressures.
Shock sensitivity is one of the key parameters for newly developed, 2,4-dinitroanisole (DNAN)-based, melt-cast explosives. For this paper, a series of shock initiation experiments were conducted using a one-dimensional Lagrangian system with a manganin piezoresistive pressure gauge technique to evaluate the shock sensitivity of an aluminized DNAN/cyclotrimethylenetrinitramine (RDX) melt-cast explosive. This study fully investigated the effects of particle size distributions in both RDX and aluminum, as well as the RDX’s crystal quality on the shock sensitivity of the aluminized DNAN/RDX melt-cast explosive. Ultimately, the shock sensitivity of the aluminized DNAN/RDX melt-cast explosives increases when the particle size decreases in both RDX and aluminum. Additionally, shock sensitivity increases when the RDX’s crystal quality decreases. In order to simulate these effects, an Ignition and Growth (I&G) reactive flow model was calibrated. This calibrated I&G model was able to predict the shock initiation characteristics of the aluminized DNAN/RDX melt-cast explosive.
Models for shock initiation in explosives must consider how energy transfers from products to reactants. This is based on different energy-apportionment assumptions, which affect the results for shock initiation. This study proposes a robust model of shock initiation in explosives using a free choice of energy-apportionment assumptions. The reacting explosive is treated as a mixture of reactants and products under different energy-apportionment assumptions. The equations of state of the mixture are efficiently solved by refining the Cochran–Chan concept of the real volume fraction and introducing a real energy fraction term. The validity, efficiency, and universality of the proposed model are verified in one-dimensional numerical simulations of the shock initiation of homogeneous (nitromethane) and heterogeneous (PBX 9404) explosives. Compared to the conventional Cochran–Chan and Johnson–Tang–Forest models, the proposed model has a better balance of computational efficiency and universality.
A novel N, F-co-doped bio-carbon material derived from cellulose was successfully developed via a convenient and simple strategy. The obtained bio-carbon material was characterized with various techniques. It is found that the addition of N, F precursors can benefit the formation of porous structure in bio-carbon during thermal pyrolysis and N, F dopants have significant effect on electronic structure of native carbon atoms, which could regulate the adsorption property and catalytic activity of obtained bio-carbon material. Furthermore, Pd NPs supported on the N, F-co-doped bio-carbon showed excellent catalytic activity and selectivity toward the aerobic oxidation of biomass-derived 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid in aqueous media under mild conditions. N, F dopants on bio-carbon material played an important role in the oxidation reaction.