Qinhao Lin

Dr. Qinhao Lin

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 June 2023 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
QLQinhao Lin
Qinhao Lin
DGDa Gao
Da Gao
BJBoao Jin
Boao Jin
YWYuqi Wang
Yuqi Wang
YYYonggang Yin
Yonggang Yin
JSJunhui Shi
Junhui Shi
Photoacoustic spectroscopy (PAS) has been proven to have great potential in health monitoring applications, such as continuous blood glucose or oxygen monitoring. However, due to the significant mismatch between different acoustic media, 99.9% of acoustic energy cannot propagate across the gas–liquid interface, which greatly limits the liquid detection sensitivity of PAS. In this study, a Helmholtz-type acoustic metasurface (HAM) consisting of a perforated plate and a subwavelength cavity filled with air is proposed to enhance the acoustic transmission across the gas–liquid interface. The behavior of the air layer within the HAM is analogous to the transverse vibration of a membrane, which would drive the vibration of the water surface and provide an effective path for sound transmission from water to air. Experimental results confirmed that HAM can increase the power transmission coefficient of sound from water to air by two orders of magnitude while maintaining optical transparency for laser. Furthermore, the performance of the PAS system coupled with HAM is investigated. It is demonstrated that the liquid detection sensitivity of PAS systems can be enhanced remarkably, with a 409% magnification of the signal intensity. The working frequency of HAM can also be flexibly adjusted from 0.01 to 20 kHz through parameter configuration, enabling compatibility with the operating frequency of PAS systems. It is expected to be applied in the field of liquid ingredient analysis and health monitoring.

26 April 2025 in Sensors
Verified
Journal Article
Open access
PDF file
XHXuefeng Huangfu
Xuefeng Huangfu
JCJunyu Chen
Junyu Chen
GGGaohui Ge
Gaohui Ge
JLJianyu Li
Jianyu Li
JZJiazhen Zhang
Jiazhen Zhang
SWShumin Wang
Shumin Wang
Due to high responsivity and wide spectral sensitivity, metal halide perovskite photodiodes have a wide range of applications in the fields of visible light and near-infrared photodetection. Specific detectivity is an important quality factor for high-performance perovskite-based photodiodes, while one of the keys to achieving high detectivity is to reduce dark current. Here, 3-fluoro phenethylammonium iodide (3F-PEAI) was used to passivate the perovskite surface and form the two-dimensional (2D) perovskite on the three-dimensional (3D) perovskite surface. The as-fabricated passivated perovskite photodiodes with 2D/3D hybrid-dimensional perovskite heterojunctions showed two orders of magnitude smaller dark current, larger open circuit voltage and faster photoresponse, when compared to the control perovskite photodiodes. Meanwhile, it maintained almost identical photocurrent, achieving a high specific detectivity up to 2.4 × 1012 Jones and over the visible-near-infrared broadband photodetection. Notably, the champion photoresponsivity value of 0.45 A W−1 was achieved at 760 nm. It was verified that the 2D capping layers were able to suppress trap states and accelerate photocarrier collection. This work demonstrates strategic passivation of surface iodine vacancies, offering a promising pathway for developing ultrasensitive and low-power consumption photodetectors based on metal halide perovskites.


1 March 2025 in Applied Physics Letters
Verified
Journal Article
Closed access
KTKun Tang
Kun Tang
QLQinhao Lin
Qinhao Lin
YXYichao Xu
Yichao Xu
DGDa Gao
Da Gao
YWYuqi Wang
Yuqi Wang
YLYibin Li
Yibin Li
We demonstrate the unidirectional propagation of structure-induced edge waves in a thin plate. These waves, termed designer flexural edge waves (DFEWs), are observed along the free edge of a thin plate featuring periodically corrugated rectangular grooves. These DFEWs can be activated unidirectionally using either a pair of point sources exhibiting phase differences or a “chiral” source characterized by a clockwise phase distribution, as evidenced in the experimental results. The observed asymmetric behavior in the former scenario is attributed to the destructive interference among the edge waves. In the latter scenario, we elucidate this phenomenon by analyzing the spatial Fourier spectrum. The chiral source induces a spatial asymmetry, while the periodic edge structure selects the specific evanescent components of the asymmetric Fourier spectrum.

6 January 2026 in Sound & Vibration
Verified
Journal Article
Open access
KXKe Xu
Ke Xu
KWKanyu Wang
Kanyu Wang
QLQinhao Lin
Qinhao Lin
Guoqing DiGuoqing Di
Guoqing Di
Many tonal noises existing in environment have high annoyance degree. It is necessary to develop acoustic materials for targeted absorption of tonal noise in order to reduce its impact. As the primary noise source in substations, transformers emit low-frequency noise with distinct tonal characteristics. According to basic constraints of materials in substations, such as fire resistance, weather resistance, and easy manufacturability by machine, a sound absorption metamaterial (SAM) is developed for absorption of noise from 110 kV transformers in this study. SAM is an aluminum alloy flat plate formed by topological arranging several basic sound absorption units on a plane. Each basic unit consists of two Helmholtz resonators stacked vertically, both of which have an inserted duct. Acoustic performance of SAM is studied by theoretical analysis, numerical simulation, and experimental measurement. Analysis results showed that ratios of its surface acoustic impedance to air acoustic impedance at two resonant frequencies of 100 Hz and 200 Hz were close to 1. Measurement results indicated that sound absorption coefficients respectively reached 0.93 and 0.90 in the normal incident sound field, reached 0.83 and 0.88 in the diffuse sound field. Moreover, the fire resistance grade of SAM reached A1 level, which indicated it was completely non-combustible. Laying SAM on reflective surfaces of structures such as transformer firewalls can reduce the impact of low-frequency noise.