It is important to consider reducing energy use while improving occupants’ indoor thermal comfort. The actual thermal comfort needs and demands should be considered to determine the indoor thermal environment design. In previous studies, research has not been carried out on thermal comfort in karst areas. Thus, a long-term field investigation was carried out on multi-storey residential buildings in the karst area of Guilin city centre during summer (from August 2019 to September 2019) and winter (from December 2019 to January 2020). In this study, the indoor thermal environments of three categories of dwellings were analysed. A total of 77 residential buildings with 144 households were randomly selected, and 223 occupants from 18 to 80 years old participated. A total of 414 effective questionnaires were collected from the subjects. The results show that there was an obvious conflict between the predicted mean vote (PMV) and the thermal sensation vote (TSV). The neutrality temperatures calculated by the regression method were 24.2 °C in summer and 16.2 °C in winter. The thermal comfort range was observed at operative temperatures of 20.9–27.5 °C in summer and 12.2–20.1 °C in winter. The desired thermal sensation for people in the Guilin karst area was not always reflected in the thermal neutrality range. A preference for warmness was identified in the survey.

Climate change and population aging are two of the most important global health challenges in this century. A 2020 study by the Environmental Protection Agency showed that average people, particularly older adults, spent 90% of their time at home. This is even more evident during the coronavirus disease 2019 (COVID-19) pandemic. Home-based care models have become a new trend. The health and comfort of the living environment profoundly impacts the wellbeing of older adults. Therefore, research on the physical environment of the family wards has become an inevitable part of promoting the health of older adults; however, current research is still lacking. Based on the study and analysis of continuous monitoring data related to elements of the physical environment (thermal comfort, acoustic quality, lighting quality, and indoor air quality) of family wards, this paper explores the living behaviors of the participants in this environmental research (open or closed windows, air conditioning, artificial lighting, and television) on the indoor physical environment. (1) While referring to the requirements of international standards for an indoor aging-friendly physical environment, we also discuss and analyze the physical environment parameter values according to Chinese standards. (2) People's life behaviors have different degrees of influence on the elements of indoor physical environments. For example, opening doors and windows can alleviate the adverse effects of indoor environmental quality on the human body better than simply turning on the air conditioner. (3) Owing to the decline in physical function, older adults need special care. Studying the status quo of physical environmental elements and proposing suitable environmental improvement measures for aging are of great significance. (4) This research aims to address global warming and severe aging and to contribute to sustainable environmental development.

The present study aims to further demonstrate the cooling benefits of an extensive green roof (EGR) and fill the gap existing in the literature in terms of a sensitivity analysis of an EGR, especially in subtropical areas. First, onsite measurements were performed. The results indicated that the peak air temperatures in the chamber with the EGR were 4.0 °C and 1.9 °C lower, respectively, compared to those in the chamber with a bare roof on sunny and rainy days. Moreover, the EGR decreased the daily electricity consumption from air conditioning by up to 16.7% on sunny days and 6.7% on cloudy days. Second, the measured values were employed to validate the green roof module (GRM) in EnergyPlus. The results demonstrated that the GRM yielded accurate results in quantifying the cooling benefits of the EGR. Finally, we selected 16 factors of the EGR, each with four levels, to perform the sensitivity analysis. Range and variance analyses revealed that the factors that most significantly impacted the EGR performance were the R-value of roof construction, substrate (soil) thickness, the thermal conductivity of dry substrate, the leaf area index, leaf emissivity, and the solar absorptance of the substrate. These factors contributed 90.8% to the performance index.

Low-altitude remote sensing platform has been increasingly applied to observing local thermal environments due to its obvious advantage in spatial resolution and apparent flexibility in data acquisition. However, there is a general lack of systematic analysis for land cover (LC) classification, surface urban heat island (SUHI), and their spatial and temporal change patterns. In this study, a workflow is presented to assess the LC’s impact on SUHI, based on the visible and thermal infrared images with high spatial resolution captured by an unmanned airship in the central area of the Sino-Singapore Guangzhou Knowledge City in 2012 and 2015. Then, the accuracy assessment of LC classification and land surface temperature (LST) retrieval are performed. Finally, the commonly-used indexes in the field of satellites are applied to analyzing the spatial and temporal changes in the SUHI pattern on a local scale. The results show that the supervised maximum likelihood algorithm can deliver satisfactory overall accuracy and Kappa coefficient for LC classification; the root mean square error of the retrieved LST can reach 1.87 °C. Moreover, the LST demonstrates greater consistency with land cover type (LCT) and more fluctuation within an LCT on a local scale than on an urban scale. The normalized LST classified by the mean and standard deviation (STD) is suitable for the high-spatial situation; however, the thermal field level and the corresponded STD multiple need to be judiciously selected. This study exhibits an effective pathway to assess SUHI pattern and its changes using high-spatial-resolution images on a local scale. It is also indicated that proper landscape composition, spatial configuration and materials on a local scale exert greater impacts on SUHI.

Climate change has reduced the comfort of community environments, and there is an urgent need to improve the health and well-being of low-income residents through design and technical measures. Therefore, this paper conducts research in the context of an ongoing social housing renovation project in Aosta, Italy, in a cold winter and hot summer Alpine environment. The study combined interviews, field measurements, and multiple software simulations to analyze the home of an older adult experiencing energy deprivation. The study found that the indoor acoustic environment quality meets the requirements of various sound-related standards. Still, the lighting and thermal environment must be designed to reduce glare and western sun exposure, and the air quality could improve. Residents’ demand for renovation is low technology, low cost, and high comfort. Therefore, suggestions for combining active and passive transformation measures and maximizing the use of climate and resources are proposed. The lighting and thermal environment are optimized based on the green wisdom of the Haylofts building of the Walser family in the Alps: increase ventilation and reduce indoor air age to improve air quality. Overall, a comprehensive assessment of extreme climatic conditions facilitates the quantitative and qualitative study and control of social housing environments, improves occupant comfort, and decarbonizes such social building stock.

Living walls are important vertical greening systems with modular prevegetated structures. Studies have suggested that living walls have many social benefits as an ecological engineering technique with notable potential for reconciliation ecology. Despite these benefits, there are currently no mature workflows or technologies for monitoring the health status and water stress of living wall systems. To partially fill the current knowledge gap related to water stress, we acquired thermal, multispectral, and hyperspectral remote sensing data from an indoor living wall in the Cloud Forest of the Gardens by the Bay, Singapore. The surface temperature (Ts) and a normalized difference vegetation index (NDVI) were obtained from these data to construct a Ts-NDVI space for applying the “triangle method”. A simple and effective algorithm was proposed to determine the dry and wet edges, the key components of the said method. The pixels associated with the dry and wet edges were then selected and highlighted to directly display the areas under water-stress conditions. Our results suggest that the proposed algorithm can provide a reasonable overview of the water-stress information of the living wall; therefore, our method can be simple and effective to monitor the health status of a living wall. Furthermore, our work confirms that the triangle method can be transferred from the outdoors to an indoor environment.